
Loading scene
Walkable demo
Vineyard and Winery
Walk a hillside planting of bare, leafed and fruiting vine rows into a working yard: tractor and trailer, sorting, pressing, fermentation tanks, an open barrel vault, a bottling line and a tasting terrace.
About
What is here
Two blocks of trellised vines run across the slope, separated by a cross track. One block is planted bare, leafed and fruiting from the bottom headland up, the other the other way about, so the planting reads as an estate rather than one demonstration row. Trellis end posts, wire anchors, replacement stakes and row end markers close each block, terrace retaining walls step the top and bottom headlands, lavender edges the track, and olives and cypresses line it. A stone field hut, a work bench and the crates, bins and baskets left where the picking stopped sit at the headland.
The yard beyond is the whole harvest train in the open: tractor and crate trailer, sorting table, destemmer, a basket press and a screw press, fermentation tanks in two sizes with their walkway, a run of cellar vault ribs over flagstones carrying barrel racks, stacks and the riddling rack, a bottling line with corker and labelling head, and a tasting terrace of counter, glasses, spittoon, stools and chalkboard under vine pergolas. The farmhouse front, the stone arch gateway, the yard gate, the courtyard well and the walls close the courtyard.
What moves
The press screws turn and their cages open, the destemmer drum spins, tank hatches lift and tank doors swing, the corker plunges, the labelling head and the bottling filler turn, the riddling rack tilts, the well winds, the tractor and trailer roll their wheels and open, and the farmhouse door, its shutters, the yard gate, the stone arch gate, the field hut door, the sorting table and the work bench all open. Clips play as you come within a few metres.
What does not move, and why
Hoses, vine canes, leaves, the wine itself and the pergola growth are static. Flexible material and fluid need a joint per element or a shader, and neither is reachable with the single rigid node transform this library animates with. There are no people or animals anywhere in the scene: the pack has no skinned meshes.
The cellar is deliberately an open sided rib run and the winery machinery stands in the courtyard rather than inside a building. The demo walk has no vertical movement, so a roofed interior would be neither reachable nor photographable.
Download
The scene places most of the pack, so opening it fetches each distinct model once and clones the repeats. Vine rows, soil tiles, headland strips and walls are the repeats and cost nothing extra.
Every piece here is a published model from the pack, placed by hand. Walk with the keys or touch, and approach a piece to see it move if it has animation. Colliders, navigation and gameplay are yours to add.
Points of interest
Three growth states
Every row is a four metre trellis segment. Bare canes, leafed canopy and fruiting vines are separate models, so a block can be planted in whatever season the scene needs.
Vine Row Fruiting (Vineyard and Winery)Headland and cross track
End posts, wire anchors and row markers close each block. Crates, bins and baskets are left where the picking stopped, and lavender edges the track.
Trellis End Post (Vineyard and Winery)Tractor and crate trailer
Both roll their wheels and open: the trailer tips its tailgate, the tractor its bonnet. The fruit comes up the track to the sorting table from here.
Vineyard Tractor (Vineyard and Winery)Sorting, destemming, pressing
The sorting table opens, the destemmer drum spins, and both presses turn their screws and open their cages. This is the crush pad, left in the open so you can walk right through it.
Screw Press (Vineyard and Winery)Fermentation tanks
Two sizes of stainless tank, each with a hatch that lifts and a door that swings, and a walkway that steps up between them.
Fermentation Tank Large (Vineyard and Winery)The open cellar
A run of vault ribs over flagstones rather than a sealed cellar, so the barrel racks, the stacks and the riddling rack stay walkable and lit.
Cellar Vault Arch (Vineyard and Winery)Bottling line
The filler turns, the corker plunges and the labelling head spins a blank reel. Crates and a wine rack take the finished bottles.
Bottling Line Section (Vineyard and Winery)Tasting terrace
Counter, glasses, spittoon, stools and a chalkboard under a vine pergola, at the gateway end of the yard.
Tasting Counter (Vineyard and Winery)
Use with an AI agent
Copy this prompt into your AI chat to rebuild the layout, then describe what to change.
Rebuild the "Vineyard and Winery" demo scene from the Vineyard and Winery pack in my project. Layout (JSON, every placement with its CDN URL): https://3dassets.dev/api/v1/demos/vineyard-and-winery Pack manifest: https://3dassets.dev/api/v1/packs/vineyard-and-winery Demo page: https://3dassets.dev/demos/vineyard-and-winery - 462 placements of 60 models; units are metres, +Y up, rotation is yaw in degrees about +Y - Spawn at (-41, 0, -6.75) facing 90 degrees; eye height 1.6 m - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader, one load per distinct model, cloned per placement; no decoders required
Also available as JSON or Markdown, and via the MCP server.
Common questions
How do I use Vineyard and Winery with my AI development tools?
How do I get started?
Which game engines and tools can I use Vineyard and Winery with?
How do I import this scene into Unity, Godot, Unreal or Blender?
Can I use Vineyard and Winery in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Is the demo itself a file I can download?
Can I change the scene, or add gameplay to it?
Models in this demo
Gravel Yard Module (Vineyard and Winery)
Four metre compacted gravel yard module with loose stones scattered over the rolled surface. The working surface of the winery courtyard; tiles with the soil and headland modules.
Stone Floor Tile (Vineyard and Winery)
Two metre flagstone floor module: six flags of four sizes bedded in grit, each laid a little proud of the bed so the joints read. Tiles edge to edge across a courtyard or a cellar floor.
Harvest Basket (Vineyard and Winery)
Woven picking basket 490 mm across and 360 mm deep: twenty tapering staves, three weave bands, a solid floor, a rim hoop with two grip lugs and a static load of fruit.
Harvest Bin (Vineyard and Winery)
Half tonne timber harvest bin 1.2 x 1.0 x 0.94 m on forklift feet, banded with two steel straps and filled level with fruit. Open topped; the load is static geometry.
Picking Crate (Vineyard and Winery)
Stackable timber picking crate 620 x 420 x 375 mm with a slatted drainage floor, rope grip cutouts on the ends and corner lugs that locate the crate above it. Empty.
Yard Gate (Vineyard and Winery)
Three metre five bar timber field gate on two turned posts with pointed caps: five horizontal bars, two heels, a diagonal brace, strap hinges and a drop latch. The leaf swings on its hanging post.
Cypress Tree (Vineyard and Winery)
Columnar cypress about 6.4 m tall: a short bare trunk under five tapering foliage drums and a pointed top, the upright the Mediterranean skyline is built from. Static foliage.
Vineyard Tractor (Vineyard and Winery)
Narrow bodied vineyard tractor 1.7 m wide overall, built to pass between rows at 2.5 m spacing: open platform, seat, roll bar, exhaust stack, rear three point linkage, a lifting bonnet over a louvred grille and four rolling wheels.
Crate Trailer (Vineyard and Winery)
Single axle vineyard trailer 1.5 x 2.8 m loaded with sixteen picking crates of fruit in two courses, with timber side boards, a drop tailgate, a drawbar ring at the front and two rolling wheels.
Farmhouse Front (Vineyard and Winery)
Seven metre rendered stone farmhouse front, 5.2 m to the eaves: a lintelled doorway with a boarded oak door, four windows with stone surrounds, glazing bars and painted shutters that fold back, a corbelled eaves course and rubble facing across the whole wall.
Stone Corner Pillar (Vineyard and Winery)
Square stone corner pillar 620 mm on plan and 3.5 m tall with proud facing stones on all four sides, a projecting cap and a pyramid top. Takes the ends of two wall bays meeting at a corner.
Stone Wall Section (Vineyard and Winery)
Four metre stone wall bay 2.96 m tall and 420 mm thick, faced in rough coursed rubble on both sides with a stepped coping over it. Butts end to end and into the corner pillar.
Tile Roof Section (Vineyard and Winery)
Four metre pantiled roof module spanning 5 m: a ridge beam, a rafter plate each side, fifty four half round pantile runs down the slopes and a ridge run over the top, with the eaves overhanging front and back. Lays end to end along a ridge.
Stone Arch Gateway (Vineyard and Winery)
Stone gateway 4.8 m wide with a 3.2 m semicircular arch on two faced piers, capped and coped, hung with a pair of boarded oak gates on strap hinges that swing open into the courtyard.
Cellar Vault Arch (Vineyard and Winery)
One 3.2 m bay of open sided cellar vaulting: a semicircular stone rib on two jambs, a springing of vault each side and a capping course over it. Lays end to end into an arcade the barrels stand under, with nothing closing the sides.
Barrel Rack Tall (Vineyard and Winery)
Three high steel barrel rack 1.34 x 1.1 m and 2.7 m tall holding three 225 litre oak barrels on angled cradle rails. The taller of the pair; same footprint as the low rack.
Barrel Rack Low (Vineyard and Winery)
Two high steel barrel rack 1.34 x 1.1 m holding two 225 litre oak barrels on angled cradle rails, with four corner posts and a foot brace. Stacks with the tall rack.
Oak Barrel (Vineyard and Winery)
A 225 litre oak barrel lying on two chocks: bulged staves in five drums, four riveted hoops, a bung in the top of the belly. 0.95 m long and 0.68 m across the belly.
Barrel Stack (Vineyard and Winery)
Six 225 litre oak barrels stacked three, two and one on timber runners with chocks under the bottom course: a 3.4 m wide block of cellar, 1.7 m tall.
Topping Up Jug (Vineyard and Winery)
Stainless topping up jug of about four litres with a flared pouring lip, a strap handle and wine standing in it. Used to keep a barrel full; the liquid is static geometry.
Destemmer (Vineyard and Winery)
Stainless destemmer 1.5 m long on a four leg frame: a flared receiving hopper over a perforated drum with beater pegs that turns on its shaft, a collection trough beneath and a motor housing at one end. The must outlet is capped; no fluid.
Sorting Table (Vineyard and Winery)
Stainless sorting table 2.4 x 0.9 m on adjustable feet, with a perforated draining deck inside a raised lip, a lower rail and a waste tray on runners under the middle that pulls out. The fruit on the deck is static.
Basket Press (Vineyard and Winery)
Traditional round basket press 1.55 m across and 1.9 m tall: a cast drain base, twenty eight slatted staves in three hoops, a twin post yoke, a threaded central screw with a handwheel, and a pressing plate that travels down the basket.
Screw Press (Vineyard and Winery)
Heavy timber screw press 1.8 x 1.3 m and 2.4 m tall: a grooved draining bed with a lip, two uprights carrying a head beam, a turned wooden screw with a cross handle, a stacked cheese of pomace and a plate that presses down on it.
Cellar Floor Drain (Vineyard and Winery)
Two metre cellar floor drain: a stone channel module with a recessed dark sump and a lift out stainless grate of thirteen bars in a rebated frame. Sits flush in a run of cellar floor.
Fermentation Tank Large (Vineyard and Winery)
Stainless fermentation tank 1.9 m across and 4.5 m tall on four legs: the larger of the pair, with the same conical base, weld bands, lifting top hatch, hinged man door, racking valve and blank sight glass scale.
Fermentation Tank Small (Vineyard and Winery)
Stainless fermentation tank 1.24 m across and 3.1 m tall on four legs, with a conical drain base, three weld bands, a domed top with a lifting hatch, a hinged man door, a racking valve and a sight glass with a blank tick scale.
Tank Walkway (Vineyard and Winery)
Steel tank walkway 4.4 m long: a gridded deck 2.4 m up on four legs with a double rail each side, five stanchions a side and an eight tread access stair at one end. Spans the tops of a bank of fermentation tanks.
Pump Trolley (Vineyard and Winery)
Cellar transfer pump on a two wheeled trolley: a stainless pump head and motor on a frame, two hose tails, a push handle and three coils of hose hung over it. The hoses are solid static geometry, not simulated.
Bottling Line Section (Vineyard and Winery)
A 2.6 m bay of bottling line: a roller conveyor whose sixteen rollers turn as one, five bottles standing on it, a four nozzle filling bridge over the run and a control box on the frame. The wine and the pipework are static.
Corker (Vineyard and Winery)
Floor standing bottle corker 1.4 m tall: a cast base with a bottle seat, twin columns, a compression jaw head and a lever driven plunger that drives down into the neck, with a tray of loose corks beside it.
Vineyard Work Bench (Vineyard and Winery)
Two metre timber work bench with a five board top, a lower shelf, a bench vice, a rail of six hanging tool pegs and a chest at one end whose lid lifts on its back edge.
Labelling Head (Vineyard and Winery)
Bench labelling head 1.6 m tall with two reels of blank label stock on their spindles, a web running down over a guide plate, a press roller and a bottle in the cradle. The reels turn; the label web is static and carries no printing.
Hydrometer Stand (Vineyard and Winery)
Bench hydrometer stand 540 mm tall: a turned base, a test cylinder on a support rod with a floating hydrometer in it, a tick scale up the stem and a small tray for the sample. No readings are printed.
Sample Thief (Vineyard and Winery)
Glass sample thief 780 mm long standing in its turned holder: a tapered barrel, a narrowed foot, a thumb stop at the head and a collar where it sits in the stand. Used to draw a sample from a barrel.
Secateurs (Vineyard and Winery)
Pair of pruning secateurs 215 mm long: a straight cutting blade and a hooked counter blade on a bolted pivot, two shanks running into moulded grips and the return spring between them. Held closed; the blades are static.
Bottle Crate (Vineyard and Winery)
Timber twelve bottle crate 620 x 460 x 360 mm with a slatted floor and a lattice of dividers, holding twelve unlabelled bottles lying on their sides. Blank, with no stencil or mark on any face.
Wine Bottle (Vineyard and Winery)
Blank 750 ml wine bottle 325 mm tall with a punted body, a sloped shoulder, a finished neck and a plain foil capsule. Deliberately unlabelled, so it carries no brand, estate or vintage.
Riddling Rack (Vineyard and Winery)
Timber riddling rack 1.4 m wide: an A frame of two leaning boards with sixty four bottle holes, unlabelled bottles set neck down in them, on four braced legs, so the whole frame tilts about its ridge.
Wine Rack (Vineyard and Winery)
Timber wine rack 1.2 x 1.8 m with eight shelves and dividers, holding about forty five unlabelled bottles lying neck out with gaps where bottles have been taken. Stands against a cellar wall.
Courtyard Well (Vineyard and Winery)
Stone courtyard well 1.5 m across with a coursed round shaft, proud face stones, a flat coping, timber posts and a pantiled cap, and a windlass of drum, crank and hanging bucket that winds as one rigid node.
Pergola With Vine (Vineyard and Winery)
Four by three metre timber pergola on stone pads, seven rafters over two beams, with a trained vine up one leg and a canopy laid across the top. The vine wood, leaves and bunches are static geometry.
Tasting Counter (Vineyard and Winery)
Three metre tasting counter: a coursed stone base with proud face stones, a thick oak top overhanging front and back on a shadow rail, three open bottles standing on it and a serving board at one end.
Tasting Glasses (Vineyard and Winery)
Oak tray 460 x 320 mm carrying six tasting glasses, each with a foot, a drawn stem and a tapered bowl; three of them hold a static pour. Sits on the tasting counter.
Spittoon (Vineyard and Winery)
Floor standing tasting spittoon 1.05 m tall: a weighted base, a column and a stainless funnel bowl with a rolled rim over a collecting body. The contents are static geometry.
Chalkboard (Vineyard and Winery)
Framed chalkboard 1.2 m wide on a folding easel leg, carrying abstract chalk marks only: three bars, two ticks and a ring, with a chalk resting on its ledge. Deliberately wordless, so it names nothing.
Tasting Stool (Vineyard and Winery)
Round topped timber stool 765 mm tall on four splayed legs with two stretcher pairs, a dished seat and metal foot cups. Pulls up to the tasting counter.
Lavender Row (Vineyard and Winery)
Three metre row of nine clipped lavender bushes on a worked earth strip, each carrying seven flower spikes above the mound. The planting that edges a Mediterranean yard; static, with no wind motion.
Vineyard Soil Tile (Vineyard and Winery)
Four metre cultivated vineyard ground module: worked earth 120 mm thick with eight ridges raked across it and a few weed tufts between them. Tiles edge to edge on the estate grid.
Headland Strip (Vineyard and Winery)
Four metre grassed headland module: the mown turning strip at the end of the rows, with tufts left standing and a worn earth wheel track along one edge. Tiles with the soil and gravel modules.
Vine Row Bare (Vineyard and Winery)
Four metre trellised vine row bay in winter condition: three timber posts, a fruiting wire and three pairs of foliage wires, with four pruned vines showing trunk, cordon arms and spur stubs.
Vine Row Fruiting (Vineyard and Winery)
Four metre trellised vine row bay at harvest: canopy along the foliage wires and ten tapered bunches hanging in the fruiting zone under it, on the same three post trellis as the bare and leafed bays.
Trellis End Post (Vineyard and Winery)
Raked vineyard end post on a stone footing with four wire brackets, a tensioning wire down to its own ground anchor and a driven steel stake. Takes the pull of a whole row of trellis.
Row End Marker (Vineyard and Winery)
Round timber marker post at the head of a row with a blank steel plate carrying abstract punched bars and a dot, on a poured collar. No text, numbering or estate name.
Wire Anchor Stake (Vineyard and Winery)
Driven ground anchor for a trellis tension wire: a tapered steel stake with a flat eye plate at its head and the disturbed soil collar around its foot.
Vine Row Leafed (Vineyard and Winery)
Four metre trellised vine row bay in full leaf: the same posts, wires and pruned vines as the bare bay with a two tier canopy tucked between the foliage wires, offset either side of the row so it reads with depth.
Vine Stake (Vineyard and Winery)
Single chestnut vine stake, squared and lightly leaning, with a cut head. Driven beside a young vine to carry it up to the fruiting wire.
Terrace Retaining Wall (Vineyard and Winery)
Four metre dry stone terrace retaining wall, 1.2 m high, built in five battered courses with individually proud face stones, a flat coping and the retained soil behind it. Lays end to end along a contour.
Olive Tree (Vineyard and Winery)
Mature olive tree about 3.4 m tall with a thick twisting trunk, two heavy limbs and a broad grey green crown of overlapping foliage lobes over a mounded earth collar. Static foliage.
Stone Field Hut (Vineyard and Winery)
Small dry stone field hut, 2.9 x 2.5 m, with rough proud facing stones on all four walls, a lintelled doorway with a boarded plank door on strap hinges and a corbelled stone roof rising to a cap.