
Loading model
About
Original CC0 self storage library: a ported storage unit module with an orange roller shutter in small, medium and large widths, the same bay shown open and stocked with cartons, crates, a bicycle and furniture under dust sheets or open and empty, a standalone partition wall, corridor floor tiles, clad wall modules, a building roller shutter door, a goods lift landing door, numbered unit plates and a padlock on its hasp, and a mezzanine deck section with its edge rail and the stair up to it, all on one 3 m grid with real connector ports. The handling side carries a flatbed trolley and a platform trolley with a push handle, a hand pallet truck, a sack truck, a ground level loading dock with its leveller plate, a dock bumper pair, a bay number sign, a box van with opening rear doors, a packing bench with tape and cartons, a stretch wrap stand, a stack of timber pallets, a shrink wrapped pallet and a stack of storage crates. The site outside adds the office counter with its screen, a key cabinet, a CCTV camera on a bracket, an access control keypad post, an entrance barrier, mesh fence panels and a gate standing open, a floodlight mast, a fire point, a waste skip, a wheeled bin, a cleaning trolley, a safety sign set and yard and marked parking ground tiles. Named pivoted nodes carry rigid node-transform clips only: the unit shutters and the building shutter lift, the van's rear doors and the key cabinet doors open and close, the goods lift leaves slide apart, the barrier arm tilts up, the bin and skip lids lift, and the van, trolley, pallet truck, sack truck and bin wheels roll. Stretch wrap and shrink wrap film, load straps, the skip's lifting chains, camera cables, the dock leveller's ram and lip and the welded mesh infill are modelled solid and never move, because none of them is reachable with one rigid node transform. No storage company, van manufacturer or brand names, badges or artwork anywhere: every plate and label is blank.
Files load directly from the CDN. Choose the pieces you need. Colliders, navigation and gameplay scripts are supplied by your game.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the pack.
Use the “Self Storage Facility and Loading Bay” pack in my project. Manifest (JSON, every model with its CDN URL): https://3dassets.dev/api/v1/packs/self-storage-facility-and-loading-bay Starter scene (one GLB with every piece placed): https://cdn.3dassets.dev/assets/34733/v1/model.glb Pack page: https://3dassets.dev/packs/self-storage-facility-and-loading-bay Description: Storage units with lifting roller shutters, a ported corridor and mezzanine kit, a loading dock, a box van, trolleys and pallet gear, plus the site office, barrier, fencing and floodlights: everything a modern self storage facility and its loading bay needs. - 43 GLB models, 2.3 MB in total - Units: metres, +Y up, shared scale and palette across the pack - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader; no additional decoders required. Load models individually from the manifest, or the starter scene as one file.
Also available as a JSON manifest or via the MCP server.
Common questions
How do I use Self Storage Facility and Loading Bay with my AI development tools?
How do I get started?
Which game engines and tools can I use Self Storage Facility and Loading Bay with?
How do I import this pack into Unity, Godot, Unreal or Blender?
Can I use Self Storage Facility and Loading Bay in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Do I have to download the whole pack?
Do the models in Self Storage Facility and Loading Bay fit together?
Game kit
Self Storage Facility and Loading Bay
Storage units with lifting roller shutters, a ported corridor and mezzanine kit, a loading dock, a box van, trolleys and pallet gear, plus the site office, barrier, fencing and floodlights: everything a modern self storage facility and its loading bay needs.
One GLB with every piece placed in a starter scene. Each model is also below on its own.
View demoEverything in this pack
Storage corridor floor tile, 3 m (Self Storage Facility and Loading Bay)
Power floated concrete corridor module 3 m square and 120 mm thick, with a yellow keep clear stripe down each side of the walkway, a recessed saw cut joint and edge ports on all four sides.
Site yard ground tile, 3 m (Self Storage Facility and Loading Bay)
External concrete yard module 3 m square and 120 mm thick with saw cut joints running each way and a galvanised slot drain along one edge, laying into the same grid as the corridor floor.
Marked parking bay ground tile, 3 m (Self Storage Facility and Loading Bay)
The same 3 m yard module painted as a customer parking bay: a yellow bay outline standing 5 mm proud of the slab, a charcoal wheel stop bolted across the head of the bay and the same four edge ports.
Storage unit module with roller shutter, 3 m (Self Storage Facility and Loading Bay)
Self storage unit bay 3 m wide, 3 m deep and 2.6 m to the head: a ribbed grey partition on its left side, a ribbed back wall, a steel roof deck, a head beam with the barrel behind it, charcoal guides and an orange slatted shutter that lifts clear of the opening.
Storage unit module, small, 1.5 m (Self Storage Facility and Loading Bay)
The same unit bay at 1.5 m wide, the locker size a customer takes for boxes and files. Identical depth, head height, partition and shutter, with its ports on its own half width so it laces into the same corridor run.
Storage unit module, large, 4.5 m (Self Storage Facility and Loading Bay)
The same unit bay at 4.5 m wide, the size a customer takes for a house move or a small business stock. Identical depth, head height, partition and shutter, ported on its own half width.
Open storage unit with stored contents (Self Storage Facility and Loading Bay)
A 3 m unit with its shutter fully rolled into the barrel and the bay stocked the way a customer leaves it: taped cardboard cartons stacked against the back wall, two timber crates, an armchair and a table under cream dust sheets and a bicycle leaning on the partition.
Open storage unit, empty (Self Storage Facility and Loading Bay)
The same open 3 m unit swept out and ready to let: bare concrete floor between the partitions, the back wall ribs and the roof deck clear, and the shutter rolled away in the barrel.
Storage unit partition wall module, 3 m (Self Storage Facility and Loading Bay)
Standalone ribbed steel partition 3 m deep, 2.6 m tall and 100 mm thick with a charcoal capping rail and a floor channel, for capping the end of a unit run or splitting a bay that a module's own partition does not reach.
Storage building wall module, 3 m (Self Storage Facility and Loading Bay)
Ribbed grey cladding wall 3 m wide, 2.6 m tall and 150 mm thick on a concrete plinth, with a charcoal capping rail, an orange wayfinding band at 1.6 m and side ports on the centre line.
Building roller shutter door module, 3 m (Self Storage Facility and Loading Bay)
Vehicle entrance module 3 m wide and 3.4 m tall: a 2.4 m by 2.9 m opening in ribbed grey cladding, charcoal guide channels, yellow impact posts, a shutter hood and an orange slatted curtain that lifts clear of the opening.
Storage unit number plate (Self Storage Facility and Loading Bay)
Unit identification plate 0.34 m by 0.24 m: a cream face in an orange surround with a modelled three digit number, a blank tariff card slot below it and two fixing bolts, for the partition or head beam beside a unit's shutter.
Padlock and hasp (Self Storage Facility and Loading Bay)
Closed shackle padlock on a bolted steel hasp and staple: a yellow brass lock body with a charcoal keyway, a galvanised shackle over the staple and a ribbed backplate, 0.16 m across, for the bottom rail of a unit shutter.
Mezzanine deck section with edge rail, 3 m (Self Storage Facility and Loading Bay)
Storage mezzanine module 3 m square: a chequer plate walking surface on two charcoal bearers, a yellow edge nosing and a two rail guard along the corridor edge, built in two segments so a 1.4 m access opening falls at the centre of every section.
Mezzanine stair flight, 2.87 m rise (Self Storage Facility and Loading Bay)
Industrial straight flight up to a storage mezzanine: thirteen open chequer plate treads on charcoal stringers, orange grab rails on knee height posts each side and bolted base plates, rising 2.87 m over a 3.1 m run.
Flatbed warehouse trolley (Self Storage Facility and Loading Bay)
Low flatbed trolley for moving boxes down a storage corridor: a 1.2 m by 0.7 m chequer plate deck on a charcoal chassis with an orange edge lip and four swivel castors that turn.
Platform trolley with push handle (Self Storage Facility and Loading Bay)
The same flatbed deck with a tubular push handle: a charcoal frame rising 0.95 m from the deck with an orange grab bar across the top, for pushing a full load rather than dragging it.
Hand pallet truck (Self Storage Facility and Loading Bay)
Hydraulic hand pallet truck: two 1.15 m steel forks on load rollers, a charcoal pump body with an orange tiller arm and grip, the release lever on the head and steer wheels that turn.
Sack truck (Self Storage Facility and Loading Bay)
Two wheel sack truck for stacked cartons: a charcoal tubular frame with three cross bars, a steel toe plate, orange hand grips and two pneumatic wheels that turn, standing 1.2 m tall.
Goods lift landing door, 1.8 m (Self Storage Facility and Loading Bay)
Two leaf centre opening goods lift landing door in a charcoal surround, 1.8 m wide and 2.4 m tall: brushed steel leaves with an orange kick band, a vision slot, a call panel with two blank buttons and leaves that slide back behind the jambs.
Loading bay dock with leveller plate (Self Storage Facility and Loading Bay)
Ground level loading dock 4 m wide and 2.6 m deep at 1.15 m: a concrete platform with a yellow edge line, a steel dock leveller plate and its lip reaching out over the tail of a van, a scuff kerb and four cast steps with a charcoal handrail at one end.
Dock bumper pair (Self Storage Facility and Loading Bay)
A pair of laminated rubber dock bumpers on bolted steel backplates at 1.5 m centres, each five rubber pads deep with a yellow wear band across the top, for the face of a loading dock.
Loading bay number sign (Self Storage Facility and Loading Bay)
Loading bay identification sign 0.62 m by 0.46 m: an orange plate with a charcoal header band, a cream face carrying a modelled numeral and four fixing bolts, for the wall over a dock.
Box van with rear doors (Self Storage Facility and Loading Bay)
Generic 3.5 tonne box van, 5.9 m long: a cream cab with a bonnet, a sloped windscreen, side glass and mirrors, a cream box body on a charcoal underframe with an orange waist stripe and arch flares, a rear bumper bar with lamps, twin barn doors that open and wheels that roll.
Packing bench with tape and cartons (Self Storage Facility and Loading Bay)
Packing station for a storage site: a 1.8 m timber topped bench on a charcoal frame with an orange rail, a lower shelf of flat cartons, a tape dispenser with a roll in it, made up boxes on the top and a roll of void fill on the upstand.
Stretch wrap dispenser stand (Self Storage Facility and Loading Bay)
Pallet wrap stand: a charcoal cross base with an orange banded mast, a film roll on a braked vertical spindle, a cutting blade guard and a spare roll stood on the base, 1.4 m tall.
Stack of timber pallets (Self Storage Facility and Loading Bay)
Five standard timber pallets stacked 0.7 m high, each with three bearers, three bottom boards and five deck boards, sitting slightly out of square the way a real stack does.
Shrink wrapped pallet of cartons (Self Storage Facility and Loading Bay)
A timber pallet loaded with nine taped cartons and wrapped in cream stretch film, with a charcoal pallet label on the front corner: 1.2 m by 0.8 m and 1.1 m to the top of the load.
Stack of storage crates (Self Storage Facility and Loading Bay)
Four moulded stacking crates 0.6 m by 0.4 m, two orange and two charcoal, with ribbed sides, moulded hand slots and blank cream label windows, stacked 1.3 m high.
Site office counter with screen (Self Storage Facility and Loading Bay)
Reception counter for a storage site office: a 2 m grey carcass with an orange front panel and a cream worktop, a screen on a stand with a keyboard, a card reader on a pad, a leaflet holder and a blank tariff card frame on the front.
Key cabinet (Self Storage Facility and Loading Bay)
Wall mounted key cabinet 0.62 m by 0.72 m: a grey steel carcass with a charcoal hook board and rows of numbered yellow fobs inside, and two doors with a lock escutcheon that open together.
CCTV camera on a wall bracket (Self Storage Facility and Loading Bay)
Bullet camera on a charcoal wall bracket: a bolted plate, a swan neck arm, a body with an orange band and a cream sunshield, and a glazed lens, reaching 0.62 m off the wall.
Access control keypad post (Self Storage Facility and Loading Bay)
Gate entry post 1.5 m tall: a charcoal pedestal on a bolted base with an orange faced head, a twelve key pad, a card reader pad, a blank instruction plate and a status lamp on the cap.
Entrance barrier with lifting arm (Self Storage Facility and Loading Bay)
Site entrance barrier: a charcoal cabinet on a bolted base with an orange access door and a blank plate, and a 3 m cream arm banded in orange with a red end reflector, tilting up clear of the drive.
Site mesh fence panel, 3 m (Self Storage Facility and Loading Bay)
Welded mesh security fence module 3 m wide and 2.1 m tall: galvanised mesh in a charcoal frame between two posts on precast concrete feet, with an orange site notice plate bolted to one post and side ports on the centre line.
Site mesh fence gate, 3 m, standing open (Self Storage Facility and Loading Bay)
The same 3 m fence module built as a vehicle gate with its leaf swung back against the run: a hinge post, a latch post with a keep and a drop bolt socket, and the mesh leaf standing open across 77 degrees, so a drive reads as open in a scene.
Site floodlight mast, 5.6 m (Self Storage Facility and Loading Bay)
Yard lighting column 5.6 m tall: a tapered charcoal mast on a bolted base plate over a concrete pad, an orange inspection collar with a blank plate, and a head frame carrying three floodlights with cream lenses tilted down over the yard.
Fire extinguisher point (Self Storage Facility and Loading Bay)
Free standing fire point: a red backboard on a charcoal stand with a base tray, two extinguishers with charcoal heads and hoses, a cream call point plate and a blank instruction notice, 1.3 m tall.
Waste skip (Self Storage Facility and Loading Bay)
Six yard yellow site skip 2.9 m long with sloped ends, charcoal top rails, lifting lugs and chain eyes, a charcoal lid banded in orange that lifts on the back edge, and cartons and broken timber inside.
Wheeled site bin (Self Storage Facility and Loading Bay)
Two wheel 240 litre bin: a charcoal moulded body with ribbed sides and a cream number panel, an orange lid hinged on the back edge, a charcoal handle bar and two wheels on a steel axle.
Cleaning trolley (Self Storage Facility and Loading Bay)
Janitorial trolley for a storage corridor: a charcoal tube frame on four castors with a yellow mop bucket and wringer, a cream waste sack on its hoop, a shelf of bottles and cloths and a mop and brush stowed on the back.
Site safety sign set on a post (Self Storage Facility and Loading Bay)
Four sign plates on one charcoal post: a red prohibition disc, a yellow warning triangle, an orange site rules board with a blank text block and a cream information plate, standing 2.1 m on a bolted base.
Self storage site with loading bay (Self Storage Facility and Loading Bay)
A working self storage site 21 m by 15 m. Inside the building a corridor of units runs along the back wall and down the left side: four bays across the back with their orange shutters down over numbered plates and padlocks, one open and stocked with cartons, crates, a bicycle...









