About
A modern realistic building circulation and back-of-house library for commercial office interiors: reception desks and lobby seating, security speedgates, lift landings and car interiors, escalators, stairs and balustrades, corridor and washroom wall modules, WC cubicles and sanitaryware, comms racks, cable ladder and cooling, staff kitchenettes, canteens and lockers, cleaning and post room equipment, and wayfinding. Corridor-family modules are 1.2 m runs 2.6 m tall with run-left and run-right connectors; washroom walls are 1 m runs 2.6 m tall and 100 mm thick with wall-left, wall-right and a corner carrying wall-back; WC cubicles pitch at 900 mm, servery counters at 600 mm, 19-inch racks at 600 mm, cable ladder and ceiling rafts and balustrades at 1.2 m. Lift leaves, cubicle and locker doors, rack doors, the fire door and a lifted raised floor tile are named nodes pivoted on their hinge or slide axes. Every file is self-contained static CC0 geometry with no rig, animation, collision or navigation data.
Files load directly from the CDN. Choose the pieces you need. Colliders, navigation and gameplay scripts are supplied by your game.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the pack.
Use the “Office Lobby and Building Facilities” pack in my project. Manifest (JSON, every model with its CDN URL): https://3dassets.dev/api/v1/packs/office-lobby-and-facilities Starter scene (one GLB with every piece placed): https://cdn.3dassets.dev/assets/10198/v1/model.glb Pack page: https://3dassets.dev/packs/office-lobby-and-facilities Description: Realistic office lobby, reception, lifts, stairs, corridors, washrooms, comms rooms, staff amenities and building facilities. - 111 GLB models, 11.6 MB in total - Units: metres, +Y up, shared scale and palette across the pack - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader; no additional decoders required. Load models individually from the manifest, or the starter scene as one file.
Also available as a JSON manifest or via the MCP server.
Game kit
Office Lobby and Building Facilities
Realistic office lobby, reception, lifts, stairs, corridors, washrooms, comms rooms, staff amenities and building facilities.
One GLB with every piece placed in a starter scene. Each model is also below on its own.
Everything in this pack
Curved reception desk (Office Lobby and Building Facilities)
A curved reception desk swept on a 1.85 m radius through 86 degrees: a shaped counter body with a timber transaction top at 1.1 m, a working top at 750 mm, an illuminated accent reveal, recessed kick bands, timber return panels and an under-counter shelf.
Reception desk module, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m straight reception desk module: a shaped counter body with a 1.1 m bullnose timber transaction top, a 750 mm working top with a cable grommet, an accent reveal, a recessed kick and a bracketed under-counter shelf.
Reception desk end module (Office Lobby and Building Facilities)
A 1.2 m reception desk end module closing a run: the same counter section with a full-height timber return panel and a rounded stainless nose post on the open end.
Reception back wall with blank sign panel (Office Lobby and Building Facilities)
A 3.0 m by 2.6 m reception back wall: five timber panel boards with shadow gaps, a blank raised sign panel on four standoffs carrying no lettering or mark, an accent light reveal and a dark skirting band.
Visitor sofa, two seat (Office Lobby and Building Facilities)
A 1.56 m two-seat visitor sofa: a recessed plinth on chamfered feet, two crowned seat cushions with welt piping, two upright back pads, upholstered arm bolsters and timber arm caps and capping rail.
Visitor sofa, three seat (Office Lobby and Building Facilities)
A 2.22 m three-seat visitor sofa on the same frame and cushion module as the two-seat version, with three piped seat cushions and three back pads.
Lobby armchair (Office Lobby and Building Facilities)
A 0.68 m lobby armchair on a disc swivel base: a chamfered seat shell, a crowned piped seat pad, a tilted upright back pad and two piped arm bolsters.
Lobby coffee table (Office Lobby and Building Facilities)
A 1.1 m by 0.6 m lobby coffee table: a bullnose timber top on mitred steel plate legs with levelling glides and a lower timber shelf.
Lobby side table (Office Lobby and Building Facilities)
A 0.56 m diameter lobby side table 0.54 m high: a cast disc foot, a slim steel column and a dished timber top with an accent edge ring.
Magazine rack (Office Lobby and Building Facilities)
A 0.46 m by 1.2 m leaning magazine rack: two raked steel stiles on glides carrying four angled timber shelves with front retaining lips.
Visitor sign-in kiosk (Office Lobby and Building Facilities)
A 1.12 m visitor sign-in kiosk: a tapered pedestal on a chamfered foot, an angled bezelled touchscreen head, a badge printer slot, an inclined card reader and a status lamp.
Security speedgate pair (Office Lobby and Building Facilities)
A pair of 1.25 m security speedgate pedestals on a 620 mm aisle with the barriers closed: stainless capping, reader targets, accent path strips, rounded end caps and two glass barrier wings as named nodes pivoted on the pedestal hinge line.
Security speedgate pair, barriers open (Office Lobby and Building Facilities)
The same speedgate pair with both glass barrier wings swung back along the pedestals, leaving the 620 mm aisle clear.
Tripod turnstile (Office Lobby and Building Facilities)
A 0.99 m tripod turnstile: a cast column pedestal, an inclined head with a reader target and two status lamps, and a three-arm rotor on a forward inclined axis as a named pivoted node.
Lobby planter trough (Office Lobby and Building Facilities)
A 1.2 m by 0.4 m lobby planter trough 0.58 m high: a tapered vessel with a timber capping rim, an internal drainage grille and a recessed plinth. Supplied empty; planting comes from a nature pack.
Entrance matwell and threshold (Office Lobby and Building Facilities)
A 2.0 m by 1.2 m recessed entrance matwell: an aluminium frame carrying twenty-two alternating aluminium and rubber scraper rails, with a chamfered threshold plate on the approach side.
Retractable belt queue post (Office Lobby and Building Facilities)
A 0.98 m retractable belt queue post: a weighted chamfered base, a stainless column, a four-way belt cassette head and an accent belt tongue.
Visitor cubby unit (Office Lobby and Building Facilities)
A 0.9 m by 0.8 m open visitor cubby unit: a chamfered carcass divided into nine compartments with recessed dark backs and a timber capping top.
Lift landing door module, closed (Office Lobby and Building Facilities)
A 1.2 m lift landing module 2.6 m tall: a stainless architrave around a 0.98 m by 2.16 m opening, a twin-track sill, a landing indicator plate and two centre-opening leaves as named nodes pivoted on their slide axes.
Lift landing door module, open (Office Lobby and Building Facilities)
The same lift landing module with both leaves parked in their pockets, the opening clear and a dark car backdrop and threshold sill behind.
Lift car interior (Office Lobby and Building Facilities)
A 1.6 m by 1.45 m lift car interior 2.35 m tall: a chamfered floor pan, three panelled walls with a mirrored back and stainless dado panels, a three-sided handrail, a skirting, a car panel with eight buttons and a ceiling raft with four downlights and an extract grille.
Lift call panel (Office Lobby and Building Facilities)
A 0.16 m by 0.44 m lift call panel: a brushed back plate, a recessed button plate with up and down buttons and a small position display.
Lift floor indicator (Office Lobby and Building Facilities)
A 0.38 m by 0.2 m lift floor indicator: a chamfered stainless surround, a dark display face, a lit digit panel and a direction arrow lens.
Escalator module (Office Lobby and Building Facilities)
A 1.24 m wide escalator module with a 1.5 m rise on a 30 degree incline: two truss skirts, inboard step skirts, glass balustrades, moving handrail bands, eleven cleated steps with risers and combed landing plates at both ends.
Stair flight module (Office Lobby and Building Facilities)
A 1.2 m wide stair flight of twelve 150 mm risers on a 280 mm going: a raking waist slab, two chamfered strings, timber treads with accent nosings and closed risers, rising 1.8 m over 3.36 m.
Stair landing module (Office Lobby and Building Facilities)
A 1.2 m by 1.4 m stair landing slab 0.26 m deep: a chamfered soffit, a timber deck, an accent nosing on the leading edge and four levelling pads.
Stair balustrade module, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m glass balustrade module 1.1 m high: a chamfered base shoe, a laminated glass infill, a stainless handrail tube with a timber cap and two intermediate clamps.
Corridor wall module, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m corridor wall module 2.6 m tall and 100 mm thick: a chamfered leaf with skirtings both sides, a timber dado rail, a recessed services plate with two outlets and a head trim.
Corridor doorway module (Office Lobby and Building Facilities)
A 1.2 m corridor wall module with a lined 0.92 m by 2.1 m opening: timber linings, architraves both sides and a head trim, supplied without a leaf for a free opening.
Corridor door module with leaf (Office Lobby and Building Facilities)
The same corridor doorway module fitted with a flush hinged leaf as a named node pivoted on its hinge edge, with a lever handle set, an escutcheon and two barrel hinges.
Fire door module (Office Lobby and Building Facilities)
A 1.2 m fire door module 2.6 m tall: a hardwood frame with intumescent seal rebates, a rated leaf with a vision panel, an overhead closer arm, a kick plate and a blank keep-shut disc, all on a named node pivoted on the hinge edge.
Corridor ceiling module with lighting (Office Lobby and Building Facilities)
A 1.2 m square corridor ceiling raft 0.15 m deep: a chamfered tray in an exposed grid with a linear luminaire lens, a pendant sprinkler head and a smoke detector.
Corridor ceiling module with air grille (Office Lobby and Building Facilities)
The same 1.2 m ceiling raft without the luminaire, closed with a plain tile and a four-way swirl supply grille.
Wall-mounted corridor handrail (Office Lobby and Building Facilities)
A 1.2 m wall-mounted corridor handrail: a 46 mm stainless tube on three bracket plates with domed returns at both ends.
WC cubicle module, 900 mm (Office Lobby and Building Facilities)
A 900 mm WC cubicle module 2.0 m tall on 150 mm adjustable legs and 1.5 m deep: a divider panel, a front pilaster, a head rail, a rear duct panel with a flush plate and a service hatch, and a hinged door with an indicator bolt and a coat hook as a named pivoted node.
WC cubicle module, door open (Office Lobby and Building Facilities)
The same 900 mm WC cubicle module with the door swung inward through sixty-six degrees, showing the duct panel and flush plate inside.
Accessible WC cubicle module (Office Lobby and Building Facilities)
A 1.8 m by 2.0 m accessible WC cubicle module 2.0 m tall: a divider, a wide pilaster, a head rail, a duct panel with a flush plate, three grab rails, an alarm pull cord and a 900 mm outward-opening door with a pull rail as a named pivoted node.
Tiled washroom wall module, 1 m (Office Lobby and Building Facilities)
A 1 m tiled washroom wall module 2.6 m tall and 100 mm thick: a chamfered leaf with a nine-course stretcher-bond tile field, an accent border tile band, skirtings both sides and a head trim.
Washroom wall corner (Office Lobby and Building Facilities)
A 100 mm washroom wall corner post 2.6 m tall turning a tiled run through ninety degrees, tiled on both exposed faces with a head trim and a skirting collar.
Wall-hung urinal (Office Lobby and Building Facilities)
A 0.36 m wall-hung urinal 0.66 m tall: a moulded ceramic bowl with a real dished cavity, a chromed spreader, a domed waste grate, a flush pipe spigot and a back fixing panel.
Urinal divider panel (Office Lobby and Building Facilities)
A 0.42 m deep urinal divider panel 1.1 m tall: a chamfered board with a raked leading edge on a wall bracket plate, two fixing spigots and a chromed floor support leg.
Wall-hung WC pan (Office Lobby and Building Facilities)
A 0.36 m by 0.54 m wall-hung WC pan: a moulded ceramic bowl with a real cavity, a shrouded rear trap, a chamfered seat ring with two hinges and a duct flush plate above.
Vanity trough with two basins (Office Lobby and Building Facilities)
A 1.7 m vanity trough at 900 mm: a moulded trough basin inset in a solid-surface deck built as four rails, an apron and back upstand, a welded steel frame, two pillar mixer taps and two waste grates with bottle traps.
Single basin vanity unit (Office Lobby and Building Facilities)
A 0.62 m single basin vanity unit at 890 mm: a chamfered carcass on a recessed plinth with a handleless rail, a solid-surface top, a countertop basin with a real cavity, a pillar mixer tap and a back upstand.
Washroom mirror run (Office Lobby and Building Facilities)
A 1.6 m by 0.9 m washroom mirror run: a laminated glass panel in a chamfered stainless frame with an accent light band and a top light housing.
Wall hand dryer (Office Lobby and Building Facilities)
A 0.3 m by 0.36 m wall hand dryer: a chamfered wedge body with a nozzle slot, a louvred inlet grille, a status lamp and a back fixing plate.
Paper towel dispenser (Office Lobby and Building Facilities)
A 0.3 m by 0.42 m paper towel dispenser: a chamfered cabinet, a dispense throat and a hinged front cover as a named pivoted node with a key barrel.
Soap dispenser (Office Lobby and Building Facilities)
A 0.12 m by 0.22 m wall soap dispenser: a chamfered body with a level window, a push lever and a nozzle on a back fixing plate.
Pedal sanitary bin (Office Lobby and Building Facilities)
A 0.24 m pedal sanitary bin 0.54 m tall: a tapered chamfered body, a hinged lid as a named pivoted node, a foot pedal on a linkage bar and an accent status strip.
Baby change unit (Office Lobby and Building Facilities)
A 0.86 m by 0.5 m wall-mounted baby change unit shown deployed: a chamfered wall cabinet with an accent instruction panel and a dished changing tray on two struts and a safety strap, as a named node pivoted on its lower hinge line.
Grab rail set (Office Lobby and Building Facilities)
A 0.6 m horizontal and 0.5 m vertical grab rail set: 36 mm rails on three chromed wall flanges with spacer spigots.
Twin toilet roll dispenser (Office Lobby and Building Facilities)
A 0.34 m twin toilet roll dispenser: a chamfered stainless hood on a back plate over two loaded rolls on spindles, with a core cover, a tear bar and a blank accent label.
42U server rack, open frame (Office Lobby and Building Facilities)
A 600 mm by 1000 mm 42U server rack 2.0 m tall as an open frame: chamfered side stiles and a base plinth, four punched mounting rails, seven populated appliances with vent slots and status lamps, cable fingers, a management arm, a vertical power strip and levelling feet.
42U server rack with mesh doors (Office Lobby and Building Facilities)
The same 42U rack fitted with perforated mesh doors front and rear, each a named node pivoted on its hinge edge with a swing handle.
Rack shelf and console unit (Office Lobby and Building Facilities)
A 0.55 m 19-inch cantilever shelf stack 0.76 m tall: three vented shelves on two punched stiles carrying two appliances, with a fold-out console screen and key deck on top.
Wall-mount comms cabinet (Office Lobby and Building Facilities)
A 0.62 m by 0.66 m wall-mount comms cabinet 0.42 m deep: a welded case with two mounting rails, a patch bank and two switches, a roof extract grille and a glazed hinged door as a named pivoted node.
Patch panel, 24 port (Office Lobby and Building Facilities)
A 0.485 m 24-port patch panel with rack ears: two rows of twelve chamfered outlets with accent port markers and a front cable management bar with five formed cable hoops.
Floor power distribution unit (Office Lobby and Building Facilities)
A 0.34 m by 1.8 m floor power distribution unit: a chamfered column on a plinth with a metering display, five outlet banks of six sockets, a louvred vent and a top cable gland.
In-row cooling unit (Office Lobby and Building Facilities)
A 300 mm in-row cooling unit on the 2.0 m rack line: a rack-format frame with a full-height louvred front, three fan assemblies, a control display and chilled water pipework rising at the rear.
UPS cabinet (Office Lobby and Building Facilities)
A 0.6 m by 1.85 m UPS cabinet 0.85 m deep: a chamfered case on a plinth with a control display and four indicator lamps, four battery drawer fronts with pull rails and a rear extract grille.
Cable ladder run, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m cable ladder run 450 mm wide: two chamfered side rails on 100 mm sections with five rungs, splice plates at both ends and two drop rod brackets.
Cable ladder bend (Office Lobby and Building Facilities)
A 1.2 m cable ladder right-angle bend: swept outer and inner rails top and bottom on vertical posts, fanned rungs through the turn and splice plates on both openings.
Raised access floor tile (Office Lobby and Building Facilities)
A 600 mm raised access floor tile on four adjustable pedestals at 150 mm: threaded pedestal heads, stringer rails and a chamfered tile with a wear layer.
Raised access floor tile, lifted (Office Lobby and Building Facilities)
The same raised floor bay with the tile lifted through twenty-four degrees on its edge as a named pivoted node, and a twin-cup suction lifter resting on it.
Plant room air handling unit (Office Lobby and Building Facilities)
A 2.4 m by 1.5 m plant room air handling unit 1.0 m deep: a sectional casing on an anti-vibration base with three access doors, latches and hinges, a filter sight glass, a fan inspection window, a control panel, two flanged duct spigots and a condensate drain.
Staff kitchenette run (Office Lobby and Building Facilities)
A 1.8 m staff kitchenette run: an 18 mm carcass on a recessed plinth with an inset stainless sink and pillar mixer, a postformed worktop and splashback, two doors, a three-drawer bank, an appliance void and a wall cupboard row with an accent light channel.
Kitchenette wall cupboard, 600 mm (Office Lobby and Building Facilities)
A 600 mm kitchenette wall cupboard 720 mm high and 340 mm deep: a chamfered carcass with an internal shelf, two doors on rail handles as named pivoted nodes and two fixing brackets.
Tea point island (Office Lobby and Building Facilities)
A 1.4 m by 0.9 m tea point island: a double-sided carcass on a recessed plinth, a bullnose worktop with an inset sink and mixer, two bin apertures with rimmed flaps, a rear open shelf and an accent rail on the standing side.
Bottled water dispenser (Office Lobby and Building Facilities)
A 1.05 m bottled water dispenser: a chamfered tower on a dark plinth with two paddle taps and spouts, a perforated drip tray, a bottle collar and an inverted 19 litre bottle.
Snack vending machine (Office Lobby and Building Facilities)
A 0.9 m by 1.85 m snack vending machine: a glazed front over five product shelves with helix coils, a selection column with accent buttons, a coin and card module and a delivery flap as a named pivoted node. No branding or product graphics.
Drinks vending machine (Office Lobby and Building Facilities)
A 0.9 m by 1.85 m drinks vending machine: an illuminated blank front panel with a glazed product window, a five-button selection column, a coin and card module and a delivery flap as a named pivoted node. No branding or product graphics.
Canteen table, six seat (Office Lobby and Building Facilities)
A 1.8 m by 0.8 m six-seat canteen table at 740 mm: a postformed laminate top on a welded tube frame with a lower stretcher, a beam under the top and levelling glides.
Canteen bench (Office Lobby and Building Facilities)
A 1.6 m canteen bench at 450 mm: a crowned upholstered pad with a welt seam on a welded tube frame with a stiffening rail and glides.
Canteen stacking chair (Office Lobby and Building Facilities)
A 0.46 m canteen stacking chair at 450 mm: a moulded seat shell on a four-leg tube frame with an H stretcher and glides, and a waisted back shell on two swept stems.
Servery counter module, 600 mm (Office Lobby and Building Facilities)
A 600 mm servery counter module at 900 mm and 700 mm deep: a stainless body on a recessed plinth, a bullnose top, an under-counter shelf, a three-bracket tray slide and an accent front band.
Servery counter end module (Office Lobby and Building Facilities)
A 600 mm servery counter end module closing a run, with a stainless return panel and a rounded corner post on the open end.
Heated servery cabinet (Office Lobby and Building Facilities)
A 1.2 m heated servery cabinet at 900 mm: a stainless counter body with a heated well, glazed screens both sides on end posts, a lamp gantry with two heat tubes and a control panel with two dials.
Bean-to-cup coffee point (Office Lobby and Building Facilities)
A 0.62 m bean-to-cup coffee point 1.7 m tall: a chamfered plinth cabinet, a machine body with a dispense recess, twin spouts, a perforated drip tray, an angled control screen, a glass bean hopper and a side cup rail.
Breakout high table (Office Lobby and Building Facilities)
A 1.4 m by 0.7 m breakout high table at 1.05 m: a bullnose timber top on two column legs with chamfered feet and spider plates, a foot rail and two cable grommets.
Soft booth, two person (Office Lobby and Building Facilities)
A 1.5 m by 0.92 m two-person soft booth open to the front: a high upholstered back with two welted back pads, two wrapping side panels, timber capping rails, two piped seat pads on a chamfered plinth and a pedestal side table.
Staff locker bank, six door (Office Lobby and Building Facilities)
A 1.2 m by 1.8 m six-door staff locker bank: a chamfered carcass on a recessed plinth with a sloping top, two tiers of three doors with vent louvres, cam locks and card windows, each door a named pivoted node.
Staff locker bank, one door open (Office Lobby and Building Facilities)
The same six-door staff locker bank with the second door swung open through sixty-three degrees, showing the compartment back panel.
Cleaner's store shelving bay (Office Lobby and Building Facilities)
A 1.0 m by 1.9 m cleaner's store shelving bay 400 mm deep: a slotted steel frame with four decks, a kick panel, levelling glides, a back rail and a mop and broom rail with three grips.
Janitorial trolley (Office Lobby and Building Facilities)
A 0.98 m by 0.52 m janitorial trolley on four swivel castors: a welded tube frame with two decks and push rails, a sack ring with a hanging liner, two stacked buckets, a caddy tray and a folded floor sign clipped to the end.
Mop and wringer bucket set (Office Lobby and Building Facilities)
A 0.42 m mop bucket on four castors with a real moulded cavity, a wringer head with a press lever, and a mop with a banded head resting in it.
Walk-behind floor scrubber (Office Lobby and Building Facilities)
A 0.6 m by 0.9 m walk-behind floor scrubber: a moulded tank body on a chassis, two brush discs, a rear squeegee blade on a swept mount, a control column with an angled panel and a bar handle.
Waste and recycling bank, three stream (Office Lobby and Building Facilities)
A 1.2 m three-stream waste and recycling bank: a timber surround on a plinth with two internal dividers, a round, a slot and a rectangular aperture in stainless collars, and blank accent label panels above each front.
Office waste bin (Office Lobby and Building Facilities)
A 0.3 m office waste bin 0.44 m tall: a chamfered open-top body with a real cavity, a stainless liner rim, a base plate and an accent label strip.
Confidential waste console (Office Lobby and Building Facilities)
A 0.48 m confidential waste console 0.9 m tall: a chamfered lockable cabinet on a plinth with a top posting flap as a named pivoted node, a cam lock, a blank accent label panel and two side handles.
Post room sorting rack (Office Lobby and Building Facilities)
A 1.2 m by 1.6 m post room sorting rack: twenty pigeon holes on a five by four grid with recessed backs, a projecting timber sorting shelf at 0.7 m, an open lower bay on a plinth and a blank accent label strip.
Parcel locker bank (Office Lobby and Building Facilities)
A 1.5 m by 1.95 m parcel locker bank: a chamfered carcass on a plinth with a sloping top, a screen column with an angled touchscreen, a card reader and a blank accent panel, and ten mixed-size compartment doors as named pivoted nodes.
Print room bench (Office Lobby and Building Facilities)
A 1.6 m by 0.7 m print room bench at 900 mm: a postformed worktop on a welded steel frame with glides, a three-bay paper store with dividers, a back upstand and a bracketed shelf with an accent rail.
Large-format printer (Office Lobby and Building Facilities)
A 1.7 m large-format roll-fed printer on its stand: two leg frames with castors and a stretcher, a fabric catch basket, a chamfered body with a media slot and output lip, an angled control head and a rear roll spindle.
Fire extinguisher point (Office Lobby and Building Facilities)
A fire point 1.42 m tall: an extinguisher with a lathed body, neck valve, carry handle, gauge and hose standing on a chamfered base plate beside a post carrying a blank sign board and a manual call point.
First aid station (Office Lobby and Building Facilities)
A 0.42 m by 0.52 m first aid station: a wall cabinet with a recessed back, a hinged front door with a blank raised panel as a named pivoted node, and a bracket shelf carrying two eyewash bottles.
Defibrillator cabinet (Office Lobby and Building Facilities)
A 0.36 m by 0.42 m defibrillator cabinet: a chamfered wall box with a glazed hinged door as a named pivoted node, a status lamp, a blank rear label panel and a base vent grille.
Freestanding directory totem (Office Lobby and Building Facilities)
A 0.5 m by 1.85 m freestanding directory totem: a tapered aluminium blade on a chamfered weighted base with blank display panels both sides, an accent header band and a capping. No lettering or logo.
Wall wayfinding panel (Office Lobby and Building Facilities)
A 0.7 m by 0.34 m projecting wall wayfinding blade: a chamfered aluminium carrier with blank faces both sides, an accent band, and two standoff spigots on fixing plates. No lettering or logo.
Room name plate (Office Lobby and Building Facilities)
A 0.26 m by 0.11 m room name plate: a chamfered curved-face carrier with a blank slide-in insert, an accent header strip and a back fixing plate.
Floor number sign (Office Lobby and Building Facilities)
A 0.36 m diameter floor number sign: a dished aluminium disc on a spacer boss with a blank tactile face and an accent edge ring. No numerals or lettering.
Hanging banner frame (Office Lobby and Building Facilities)
A 0.9 m by 1.8 m hanging banner frame: top and bottom tensioning rails on a blank double-sided fabric panel, an accent band, two suspension wires with adjusters and ceiling clips.
Wall clock (Office Lobby and Building Facilities)
A 0.36 m diameter wall clock: a chamfered aluminium bezel, a blank dial with twelve tick markers, hour, minute and accent second hands and a centre boss.
Wall artwork panel (Office Lobby and Building Facilities)
A 1.0 m by 0.72 m wall artwork panel: a stretched blank canvas face in a chamfered timber tray frame with an accent band and two rear hanging cleats. No imagery or lettering.
Acoustic ceiling raft (Office Lobby and Building Facilities)
A 1.6 m by 1.0 m acoustic ceiling raft: a felt-faced blade both sides in a chamfered metal tray, an accent edge band, four suspension wires with adjusters and ceiling clips.
Floor-standing planter (Office Lobby and Building Facilities)
A 0.58 m diameter floor-standing planter 0.62 m tall: a tapered vessel with a rolled rim, an internal soil deck with a drainage grille and a base plate. Supplied empty; planting comes from a nature pack.
Umbrella stand (Office Lobby and Building Facilities)
A 0.36 m diameter umbrella stand 0.59 m tall: a perforated stainless drum with three courses of slots and a rolled rim, standing on a shallow drip tray.
Suspended exit light box (Office Lobby and Building Facilities)
A 0.34 m by 0.16 m suspended exit light box: a chamfered aluminium housing with blank illuminated faces both sides, a suspension bracket, two wires and a ceiling clip. No lettering or pictogram.
Office Lobby (Office Lobby and Building Facilities)
Composed example for Office Lobby and Building Facilities.
Office Washroom (Office Lobby and Building Facilities)
Composed example for Office Lobby and Building Facilities.
Comms and Server Room (Office Lobby and Building Facilities)
Composed example for Office Lobby and Building Facilities.
Facility Connector Cases (Office Lobby and Building Facilities)
Composed example for Office Lobby and Building Facilities.
