About
Original CC0 underground mine construction set. Drift modules are thick walled interior shells on a 4 m grid with a 3.2 m by 3.0 m arched clear section and explicit drift ports, so a player can stand inside them. Narrow gauge track runs at 750 mm with rail ports, and ventilation duct carries its own ports. Articulated face equipment has named boom, bucket and wheel pivots. Engineered, lined and lit workings; not a natural cave and not an open pit.
Files load directly from the CDN. Choose the pieces you need. Colliders, navigation and gameplay scripts are supplied by your game.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the pack.
Use the “Underground Mine and Shaft Works” pack in my project. Manifest (JSON, every model with its CDN URL): https://3dassets.dev/api/v1/packs/underground-mine-and-shaft-works Starter scene (one GLB with every piece placed): https://cdn.3dassets.dev/assets/11662/v1/model.glb Pack page: https://3dassets.dev/packs/underground-mine-and-shaft-works Description: A working hard-rock mine: headframe and shaft, modular lined drifts, narrow gauge haulage, face equipment, ventilation and services. - 63 GLB models, 5.5 MB in total - Units: metres, +Y up, shared scale and palette across the pack - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader; no additional decoders required. Load models individually from the manifest, or the starter scene as one file.
Also available as a JSON manifest or via the MCP server.
Game kit
Underground Mine and Shaft Works
A working hard-rock mine: headframe and shaft, modular lined drifts, narrow gauge haulage, face equipment, ventilation and services.
One GLB with every piece placed in a starter scene. Each model is also below on its own.
Everything in this pack
Straight mine drift 4 m (Underground Mine and Shaft Works)
A 4 m straight hard-rock drift module with a 3.2 m by 3.0 m arched clear section, thick rock shell, drainage ditch, resin rock bolts, a wall cable tray, compressed air and water lines and a bulkhead light.
Shotcrete lined drift section (Underground Mine and Shaft Works)
A 4 m drift section finished with a sprayed shotcrete lining over welded mesh and resin bolts, with the ditch left open at the toe.
Timbered drift set section (Underground Mine and Shaft Works)
A 4 m drift section supported by four three-piece timber square sets with capping plates, angle braces and timber lagging packed against the back.
Steel arch set drift section (Underground Mine and Shaft Works)
A 4 m drift section supported by four rolled steel arch ribs on foot plates with steel lagging channels spanning between the ribs and two tie rods.
Right hand drift curve (Underground Mine and Shaft Works)
A quarter turn drift on a 4 m radius grid, running from the north face to the east face with lights on the outer wall and a compressed air line following the curve.
Left hand drift curve (Underground Mine and Shaft Works)
The mirrored quarter turn drift, running from the north face to the west face on the same 4 m radius grid.
Drift tee junction (Underground Mine and Shaft Works)
A 4 m flat backed intersection with three arched drift openings and a closed east wall, supported by four steel corner columns, a ring beam and roof bolts.
Drift cross junction (Underground Mine and Shaft Works)
A 4 m flat backed four way intersection with arched drift openings on every side, four steel corner columns, a ring beam grid and roof bolts.
Drift incline ramp (Underground Mine and Shaft Works)
An 8 m ramp module climbing 1 m at one in eight between two drift ports, with a shotcrete invert strip, kerb and wall lights.
Widened drift chamber (Underground Mine and Shaft Works)
A 6 m by 8 m widened chamber module for parking, pumping or storage, with arched drift openings at both ends, a heavier steel roof frame and a raised concrete equipment plinth.
Widened chamber cutaway review section (Underground Mine and Shaft Works)
A review variant of the widened chamber with the east wall removed so the excavated interior, roof frame and equipment plinth can be inspected and photographed from the side.
Drift dead end working face (Underground Mine and Shaft Works)
A 4 m drift module closed by a blasted rock face with a drilled round pattern, a broken muck pile at the toe and a face inspection light. One open drift port.
Ore pass raise collar (Underground Mine and Shaft Works)
A tipping point over an ore pass raise: a concrete collar around a 2 m square opening, heavy grizzly bars, a kickboard kerb, a side chute and a control stand.
Drift cutaway review section (Underground Mine and Shaft Works)
A review variant of the straight drift with the east half of the rock shell removed so the arched section, ditch, bolting and services can be inspected from the side.
Shaft headframe (Underground Mine and Shaft Works)
A four leg braced steel lattice headframe seventeen metres to the sheave deck, with two back legs on concrete pads, a caged access ladder, a handrailed sheave deck and two named sheave wheels carrying head ropes.
Winder house (Underground Mine and Shaft Works)
A concrete winder house with an open front bay, a portal roof frame, a double drum winder on bearing pedestals, a gearbox, a motor and an operator control desk.
Sheave wheel stand (Underground Mine and Shaft Works)
A ground standing test and maintenance stand carrying two 3 m sheave wheels on a common shaft, with named rotation nodes and a bolted base frame.
Shaft collar and deck (Underground Mine and Shaft Works)
A concrete shaft collar with a 3.6 m by 2.4 m hoisting opening, a steel deck, guide rails in the shaft, a perimeter handrail and a named swing gate at the loading side.
Shaft man cage (Underground Mine and Shaft Works)
A two deck steel man cage with a mesh enclosure, guide shoes, a suspension bail and rope socket, and two named swing gates on the open front.
Bottom dump ore skip (Underground Mine and Shaft Works)
A bottom dump hoisting skip with a stiffened plate body, guide shoes, a suspension bail with rope socket and a named hinged discharge door.
Shaft station chamber (Underground Mine and Shaft Works)
An 8 m square shaft station excavated at 5.6 m clear height, with arched drift openings north and south, a 3.6 m by 2.4 m shaft opening through the back, a lined shaft sleeve above with buntons and guides, a steel roof frame and a named landing gate.
Shaft station cutaway review section (Underground Mine and Shaft Works)
A review variant of the shaft station with the east wall removed so the landing, guides, shaft sleeve and station fittings can be inspected and photographed from the side.
Shaft loading pocket (Underground Mine and Shaft Works)
A steel measuring flask on a braced frame with a lower chute, a hydraulic sector gate and a control cabinet, used to load skips at the shaft bottom.
Narrow gauge track panel 4 m (Underground Mine and Shaft Works)
A 4 m panel of 750 mm gauge track: a ballast bed, timber sleepers on 0.6 m centres and flat bottom rail with the rail head 0.28 m above the drift floor.
Narrow gauge track curve (Underground Mine and Shaft Works)
A quarter turn of 750 mm gauge track on the same 4 m radius as the drift curve, with radial sleepers and a two part rail section.
Narrow gauge turnout (Underground Mine and Shaft Works)
A 4 m turnout panel with point blades, a stretcher bar, a hand throw stand with a target and a short diverging spur leaving to the east.
Side tipping ore cart (Underground Mine and Shaft Works)
A side tipping mine car of about one cubic metre on four flanged wheels, with a named tipping body, drawbars and buffers.
End tipping ore cart (Underground Mine and Shaft Works)
An end tipping mine car with a squared box body hinged at the rear sill, on the same four wheel underframe.
Battery haulage locomotive (Underground Mine and Shaft Works)
A four wheel battery haulage locomotive for 750 mm gauge, with a battery box, a canopied operator bay, controllers, buffers and named wheels.
Mine car tipple (Underground Mine and Shaft Works)
A timber framed tipple with an elevated track deck, a named tipping cradle, a receiving bin and a discharge chute.
Two boom face drilling jumbo (Underground Mine and Shaft Works)
An articulated two boom face drilling jumbo with named left and right booms carrying feed beams, drill carriages, rods and centralisers, a covered operator platform, a cable reel and a water tank.
Load haul dump loader (Underground Mine and Shaft Works)
An articulated low profile load haul dump loader with a named lift boom, a named toothed bucket, a transverse operator compartment under a canopy and four low profile mine tyres.
Roof bolting rig (Underground Mine and Shaft Works)
An articulated roof bolting rig with a named telescopic bolting mast and rotation head, a bolt and resin carousel, a mesh rack and a canopied operator seat.
Shotcrete spraying rig (Underground Mine and Shaft Works)
An articulated shotcrete rig with an agitator hopper, a concrete pump skid, an additive tank and a named spray boom ending in a rotating nozzle head.
Explosive charging unit (Underground Mine and Shaft Works)
An articulated charging unit with two emulsion tanks, a hose reel and a named boom carrying a railed work basket for charging face holes.
Mechanical scaling rig (Underground Mine and Shaft Works)
An articulated scaling rig with a long two stage named boom carrying a hydraulic breaker for barring down loose ground, and a guarded operator compartment.
Underground personnel carrier (Underground Mine and Shaft Works)
A low profile underground personnel carrier with a driving position, two transverse bench rows under a canopy, side guards and four mine tyres.
Main ventilation fan house (Underground Mine and Shaft Works)
A surface main fan installation: an axial fan casing on a concrete plinth with an inlet bell and guard, an impeller, a motor with a drive guard, an evasé diffuser and a transition duct into the shaft collar.
Ventilation duct run 4 m (Underground Mine and Shaft Works)
A 4 m run of 1.1 m rigid ventilation ducting with bolted flanges, roof hanger brackets and reflective marker plates.
Ventilation duct bend (Underground Mine and Shaft Works)
A quarter turn of 1.1 m ventilation ducting on the 2 m radius grid, with flanges at both ends and two hanger brackets.
Brattice curtain (Underground Mine and Shaft Works)
A hanging brattice curtain across a drift on a steel track, split at the centre for a walk through, with weighted lower edges and clamp fixings.
Ventilation airlock door (Underground Mine and Shaft Works)
A concrete bulkhead filling the drift section, with a framed vehicle opening closed by two named door leaves, a personnel door beside it and an airflow warning light.
Underground pump station (Underground Mine and Shaft Works)
A dewatering pump station: two horizontal pumps with motors on a concrete plinth, suction manifolds, a delivery header with valves and a control cabinet.
Drainage sump (Underground Mine and Shaft Works)
A concrete drainage sump with an open pit, a removable steel grating over half the opening, a fixed access ladder and a suction pipe with a strainer.
Underground refuge chamber (Underground Mine and Shaft Works)
A six metre steel refuge chamber on skids with a sealed door, a viewing port, external breathing air cylinders, a scrubber cabinet, a roof beacon and an entry step with handrails.
Power distribution box (Underground Mine and Shaft Works)
A flameproof power distribution box on steel skids with a bolted front cover, an isolator handle, four cable glands with trailing cables and two indicator windows.
Cable tray run 4 m (Underground Mine and Shaft Works)
A 4 m ladder cable tray on wall brackets carrying two power cables and a communications cable, with rung spacing and marker plates.
Compressed air line 4 m (Underground Mine and Shaft Works)
A 4 m run of 180 mm compressed air pipe on wall brackets with bolted flanges, an isolating valve with a handwheel and a hose drop to a coupling.
Service water line 4 m (Underground Mine and Shaft Works)
A 4 m run of 100 mm service water pipe on the same wall brackets, with a smaller isolating valve and a hose drop.
Hard hat with cap lamp (Underground Mine and Shaft Works)
A mine hard hat with a lamp bracket, a cap lamp, a coiled cord and a belt mounted battery pack.
Belt worn self rescuer (Underground Mine and Shaft Works)
A belt worn self rescuer: a sealed steel canister in a carrier with a banded seal, a release catch, an instruction label and a belt strap.
Blasting wire spool (Underground Mine and Shaft Works)
A wooden cored spool of shot firing wire on a folding steel stand, with a carrying handle and a loose lead.
Explosives day box (Underground Mine and Shaft Works)
A lockable steel explosives day box with a hinged lid, edge banding, a hasp, a timber base and a hazard label.
Survey station and tripod (Underground Mine and Shaft Works)
A survey tripod carrying a total station over a floor spad, with a tribrach, adjustable legs, foot spikes and a marker plate.
Ore sample tray (Underground Mine and Shaft Works)
A partitioned timber sample tray holding twenty broken ore fragments with numbered labels along the front rail.
Mine timber stack (Underground Mine and Shaft Works)
A cross stacked pile of sawn mine timber on bearers, strapped with steel banding and covered by a tarpaulin sheet, with a stock label.
Drill steel rack (Underground Mine and Shaft Works)
A steel rack of seven drill rods with thread protectors, a shelf of button bits and a stencilled length label.
Mine warning sign (Underground Mine and Shaft Works)
A hazard sign on a steel post in a concrete foot, with a hatched border, a text panel and a smaller instruction plate below.
Lamp room tally board (Underground Mine and Shaft Works)
A timber tally board with three rows of numbered hooks and brass check tags, a header label and a lower shelf.
Shaft bottom station (Underground Mine and Shaft Works)
Composed example for Underground Mine and Shaft Works.
Drift run to the working face (Underground Mine and Shaft Works)
Composed example for Underground Mine and Shaft Works.
Surface shaft headworks (Underground Mine and Shaft Works)
Composed example for Underground Mine and Shaft Works.
Mine connector cases (Underground Mine and Shaft Works)
Composed example for Underground Mine and Shaft Works.
