Free models · Game-ready GLB
Animated
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
2,066 free GLB models
AnimatedWarm Up Roller Set (Velodrome and Track Cycling)
A three drum roller set for warming up on: a low charcoal frame, two rear drums and one front drum on steel rails, with the belt between them modelled as a solid strip. Each drum is a named node on its own axle and spins. 1.5 m long.
AnimatedTrack Bicycle (Upright) (Velodrome and Track Cycling)
A fixed gear track bicycle standing upright on both wheels: steel frame, drop bars, one chainring and no brakes. Both wheels are named nodes on their own axles. Riderless, and the chain is one solid strip that does not move.
AnimatedLap Board and Stand (Velodrome and Track Cycling)
The laps to go board on its stand: a two post frame with a blank white card and a hinged charcoal leaf over it that flips on the head rail. The number face is a plain white block, so a project can letter it however it likes.
AnimatedBell on a Stand (Velodrome and Track Cycling)
The bell rung for the last lap, hung from a two post stand 1.6 m up: a brass coloured bell with a clapper ball, on a named node at the head rail so the whole bell rocks. The stand is ballasted and the bell is struck by hand, so nothing else moves.
AnimatedTiming Hut (Velodrome and Track Cycling)
The trackside timing hut: a 3 by 2.4 m cabin with a long glazed window to the track, a charcoal roof, a step at the door and a blank red fascia band. The door is a named node on its hinge stile. Empty inside and unlit.
AnimatedJudges Tower (Velodrome and Track Cycling)
The raised officials tower on the home straight: a concrete base, four steel legs, a glazed cabin 3.3 m up with a run of steps to its door, and a flat roof deck. The cabin door is a named node on its hinge stile. Unlit and unoccupied.
AnimatedStarting Gate with Holder Frame (Velodrome and Track Cycling)
The wheeled frame that holds a bicycle upright for a standing start: a ballasted base on castors, two uprights and a head rail, with a hinged holder arm that lifts clear to release. The arm is a named node on the head rail pivot.
AnimatedYard store container, 6 m (Shipyard and Dry Dock)
A 6 m steel store container with corrugated sides, corner castings, a plywood lined floor and twin doors on cam locking bars, marked only with an invented blank panel. Both doors swing open.
AnimatedSite office cabin (Shipyard and Dry Dock)
A 6 m portable site office on a steel chassis: profiled cladding, two double glazed windows, a hinged half glazed door with a railed step, a blank name board and a roof with a gutter. The door opens.
AnimatedMess and drying room cabin (Shipyard and Dry Dock)
The same 6 m cabin fitted out as a mess room: one long window band over the tables, a closed serving hatch with a shelf under it, a blank notice board and the same hinged door with its railed step.
AnimatedSite tool store cabinet (Shipyard and Dry Dock)
A heavy steel tool store 1.6 m wide on a forkable plinth, with two locking doors, a shelf of power tools and hand tools inside, a hasp and a blank asset plate. Both doors swing open.
AnimatedAir hose reel on a stand (Shipyard and Dry Dock)
A wall or floor standing hose reel wound with compressed air line, on a bolted bracket with a swivel inlet, a guide roller and a coupling hung on the frame. The reel turns.
AnimatedWelding cable reel on a stand (Shipyard and Dry Dock)
A steel drum of heavy welding cable on a braked A frame stand, with a slotted flange, a crank handle, a lead end on a stud and a blank rating plate. The drum turns on its stand.
AnimatedPedestal grinding station (Shipyard and Dry Dock)
A double ended pedestal grinder on a cast base with wheel guards, tool rests, eye shields and a spark tray, beside a steel topped stand with abrasive discs and a chipping hammer on it. The wheel turns.
AnimatedWelding bay screen (Shipyard and Dry Dock)
A three leaf welding screen 3.6 m wide and 2 m tall on castors: a tubular frame with flame retardant curtains, a blank warning plate on the middle leaf and a lead hook at one end. One leaf swings to close the bay.
AnimatedProfile cutting table (Shipyard and Dry Dock)
A 4 m by 2 m downdraught cutting table with a slatted bed, a bridge gantry on rails carrying the torch head and its height sensor, a drive cabinet and a swing arm control screen. The gantry traverses the table.
AnimatedHydraulic press brake (Shipyard and Dry Dock)
A 3 m hydraulic press brake: a welded C frame with two ram cylinders, a punch on the descending beam, a vee die in the bed, a back gauge behind and a foot control on a lead. The ram strokes down and back up.
AnimatedFabrication shed door bay (Shipyard and Dry Dock)
The gable end of an 8 m span shed with a 5 m by 4 m insulated roller shutter in its own frame, a wicket beside it and a blank sign panel over the opening. The shutter rolls up into its hood.
AnimatedThree roll plate bending machine (Shipyard and Dry Dock)
A pyramid plate roller 2.6 m between housings: two driven bottom rolls, a pinching top roll, a geared drive end, a drop end for releasing a rolled shell and a pedestal control station. All three rolls turn.
AnimatedCrane man basket in its stillage (Shipyard and Dry Dock)
A two person crane basket with mesh sides, a gated entry, a rigid yoke and a single lifting eye, standing in the steel stillage it is parked and inspected in. The basket lifts straight out of the stillage.
AnimatedCrawler crane with lattice boom (Shipyard and Dry Dock)
Tracked lattice boom crane for yard lifts: twin crawler tracks on a carbody, a slewing upper with counterweight, operator cab and winch drums, and a 14 m lattice boom raked over the front. The upper slews and the hook hoists with it.
AnimatedPillar jib crane, 7 m reach (Shipyard and Dry Dock)
Bolted down pillar jib crane 8.6 m tall with a 7 m tie braced jib, a slew ring at the column head, an electric hoist on the jib and a hook block under it. The jib slews through a full circle and the hook hoists with it.
AnimatedOverhead travelling crane, 8 m span (Shipyard and Dry Dock)
Single girder underslung overhead crane for a fabrication shed: a box bridge hung from two end carriages on rail mounted wheels, a crab with its gearbox and drum, and a hook block under it. The crab traverses the bridge and the hook hoists with it.
AnimatedDock gantry crane, 24 m span (Shipyard and Dry Dock)
Rail mounted portal gantry spanning a graving dock: braced A legs on four wheel bogies, twin box girders 14 m up with a walkway, a machinery house and a crab whose hook block hangs between the girders. The crab traverses and the hook hoists.