
Loading model
About
A modern realistic indoor laser tag centre for building the whole building: the arena, the kit it is played with, and the front of house a family arrives into. Eight modular systems make the place itself: a 2 m arena floor tile in two markings, a 2 by 2.4 m wall module with a 300 mm corner post it turns through, a shooting port panel and a mirror panel and a low barricade and a doorway module that all sit on the same run, a 2 by 2 m raised platform deck with its 2.4 m ramp, a 2 m tunnel section, a 2 m glow stripe in three colours and a 2 m ceiling truss bay with its par bars. The arena furniture is modelled as arena furniture: pillars with padded collars, braced crate stacks, six faced target pods on tripods, base stations with reader screens and beacon domes, and respawn pads marked with a ring and chevrons. The kit is a moulded vest with shoulder, chest and back sensors, a phaser with a real grip, trigger, guard, shroud and emitter ring in two team colours, a four vest charging rack, a three phaser dock, a briefing screen on a stand, a scoreboard with team panels and a marshal headset. Front of house is a reception desk with a booking terminal and card reader, twelve lockers, benches, queue marking, a laid party room table with four coloured chairs, a glazed vending machine, an arcade cabinet, a prize counter under a glass cap with its shelving, an air hockey table, table football, a soft play corner, a party sign, bins, a cleaning trolley, exit signs and a smoke machine. An arena is a dark room, so none of the colour here comes from the lighting: every model carries real material contrast and reads under plain light. The arena doorway leaf, the vending machine front, the prize counter drawer, the target pod head, the briefing screen head, the scoreboard flap and the trolley castors are named nodes on their own pivots with rigid open, close, spin, tilt and roll clips: node transforms only, no skinning. Light beams, smoke plumes, charging leads, headset cables, vest straps and phaser tethers stay absent, because a beam is a volumetric effect and a flexible run is not reachable with a rigid node transform. Every file is self contained CC0 geometry with no collision or navigation data.
Files load directly from the CDN. Choose the pieces you need. Colliders, navigation and gameplay scripts are supplied by your game.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the pack.
Use the “Laser Tag Arena and Activity Centre” pack in my project. Manifest (JSON, every model with its CDN URL): https://3dassets.dev/api/v1/packs/laser-tag-arena-and-activity-centre Starter scene (one GLB with every piece placed): https://cdn.3dassets.dev/assets/34513/v1/model.glb Pack page: https://3dassets.dev/packs/laser-tag-arena-and-activity-centre Description: Realistic laser tag models: ported wall, shooting port, mirror, barricade, corner and doorway modules, floor tiles, platform, ramp, tunnel, target pods, base stations, vests and phasers with charging racks, and a front of house of reception, lockers, party room and prize counter. - 46 GLB models, 4.7 MB in total - Units: metres, +Y up, shared scale and palette across the pack - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader; no additional decoders required. Load models individually from the manifest, or the starter scene as one file.
Also available as a JSON manifest or via the MCP server.
Common questions
How do I use Laser Tag Arena and Activity Centre with my AI development tools?
How do I get started?
Which game engines and tools can I use Laser Tag Arena and Activity Centre with?
How do I import this pack into Unity, Godot, Unreal or Blender?
Can I use Laser Tag Arena and Activity Centre in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Do I have to download the whole pack?
Do the models in Laser Tag Arena and Activity Centre fit together?
Game kit
Laser Tag Arena and Activity Centre
Realistic laser tag models: ported wall, shooting port, mirror, barricade, corner and doorway modules, floor tiles, platform, ramp, tunnel, target pods, base stations, vests and phasers with charging racks, and a front of house of reception, lockers, party room and prize counter.
One GLB with every piece placed in a starter scene. Each model is also below on its own.
View demoEverything in this pack
Arena Floor Tile (Laser Tag Arena and Activity Centre)
A 2 m square arena floor tile 60 mm deep: a grey resin screed in a shallow tray, marked with a lime border line, a centre bar and a chevron in each corner, ported on all four edges so a whole arena floor is laid from repeats of one model.
Arena Floor Tile, Teal (Laser Tag Arena and Activity Centre)
The arena floor tile with teal marking instead of lime, for the opposing half of an arena or for the front of house floor, so a large floor does not read as one repeated model.
Arena Wall Panel Module (Laser Tag Arena and Activity Centre)
A 2 by 2.4 m arena wall module: a dark composite panel between two brushed stiles on a steel base rail with levelling feet, capped at the head, and carrying three raked magenta chevrons on the play side. Ported at both ends so a maze is built by repeating one model.
Arena Wall Panel with Shooting Port (Laser Tag Arena and Activity Centre)
The arena wall module with a 600 by 400 mm shooting port cut through it at chest height, lined in brushed steel and edged top and bottom in amber, so a maze has somewhere to shoot from as well as somewhere to hide behind.
Arena Corner Post Module (Laser Tag Arena and Activity Centre)
The 300 mm square corner post an arena wall run turns a right angle through: a dark column 2.4 m tall on a spreader plate, capped at the head, with a cyan stripe up all four faces. Ports on two adjacent faces at base rail height.
Arena Mirror Panel Module (Laser Tag Arena and Activity Centre)
The arena wall module faced with a full height polished panel in a cyan bead frame: the piece that makes a maze corner unreadable, because a player sees a reflection where a route should be.
Low Arena Barricade (Laser Tag Arena and Activity Centre)
A 2 m barricade 1.1 m high: a raked dark face on a wide foot with a brushed capping rail and end posts, and five amber hazard flashes across it. Ported on the same run as the wall modules, so it drops into a wall line or stands as free cover.
Arena Doorway Module (Laser Tag Arena and Activity Centre)
A 2 by 2.4 m arena wall module with a 1 m doorway through it: a dark leaf in a brushed steel lining with a lime vision slot and a full height push bar, on an amber threshold, ported like every other module so a door drops into any run.
Raised Platform Deck with Rail (Laser Tag Arena and Activity Centre)
A 2 by 2 m raised platform at 900 mm: a pale deck on a boxed dark frame with a brushed rail round three sides, a cyan kick band under the deck edge and the fourth side left open for the ramp. Ported on all four deck edges.
Arena Ramp to Platform (Laser Tag Arena and Activity Centre)
A 2.4 m ramp up to platform height: a pale checker deck on a boxed dark frame with seven amber grip strips across it and an amber kerb each side, rising 900 mm at a walkable pitch. The high end carries a platform port so it lands square on a deck edge.
Arena Tunnel Section (Laser Tag Arena and Activity Centre)
A 2 m tunnel section 1.5 m wide and 1.7 m tall: a flat sided arch in dark composite with brushed end ribs and floor rails, and a lime stripe along the inside so a player can find the exit in the dark. Ported at both open ends so sections chain into a crawl.
Target Pod on Stand (Laser Tag Arena and Activity Centre)
A free standing target pod: a three legged foot, a 1 m column and a six faced magenta head banded in lime with a domed sensor on every face, so a pod is shootable from any approach.
Team Base Station (Laser Tag Arena and Activity Centre)
A 1.5 m team base station: a ribbed dark tower on a spreader plinth with cyan score bands, a raked reader screen at chest height and an amber beacon dome on top, for the end of an arena a team defends and tags back in at.
Respawn Pad Marking Tile (Laser Tag Arena and Activity Centre)
A 1 m square respawn pad: a thin dark plate laid over the arena floor with a cyan ring and four chevrons pointing into the middle of it, so a tagged player knows where to stand out the count.
Glow Stripe Trim, Magenta (Laser Tag Arena and Activity Centre)
A 2 m glow stripe: a brushed aluminium channel 80 mm deep with a magenta diffuser lens in it and a fixing lug at each end, ported end to end so a run chases along an arena wall or round a doorway.
Glow Stripe Trim, Cyan (Laser Tag Arena and Activity Centre)
The 2 m glow stripe with a cyan lens, for the opposing team colour or for alternating a run so a long wall does not read as one length repeated.
Glow Stripe Trim, Lime (Laser Tag Arena and Activity Centre)
The 2 m glow stripe with a lime lens, which is the colour an arena usually reserves for its route and exit marking.
Arena Pillar (Laser Tag Arena and Activity Centre)
A 450 mm square arena pillar 2.6 m tall on a spreader plate, with a padded grey collar to waist height, a cyan stripe up all four faces and a capping plate. Free standing cover for the middle of a bay, where a wall run would close a route off.
Crate Stack Barricade (Laser Tag Arena and Activity Centre)
Three braced plywood crates stacked as cover, 1.3 m across and 1.1 m tall: two on the floor set at an angle to each other with a third across them, banded in grey steel and stencilled in amber.
Laser Tag Vest with Shoulder Sensors (Laser Tag Arena and Activity Centre)
A laser tag vest as a rigid moulded shell: a curved chest plate and back plate joined over the shoulders in team cyan, with domed sensors on both shoulders, the chest and the back, and a dark harness trim down each flank.
Marshal Vest on a Hanger (Laser Tag Arena and Activity Centre)
A marshal vest hung ready on a stand: the same moulded shell in high visibility amber with a dark name panel front and back, on a wire hanger over a weighted chrome garment stand 1.65 m tall.
Laser Tag Phaser, Magenta (Laser Tag Arena and Activity Centre)
A laser tag phaser 500 mm long: a moulded magenta receiver with a raked grip, a real trigger inside a closed guard, a grey barrel shroud ending in a magenta emitter ring, a sight rail along the top, a score readout on the left flank and a sensor dome on the right.
Laser Tag Phaser, Cyan (Laser Tag Arena and Activity Centre)
The laser tag phaser in cyan, the opposing team colour, so the two sides of a game read apart at a glance on the rack and in a player's hands.
Vest Charging Rack (Laser Tag Arena and Activity Centre)
A 1.7 m charging rack with four vests on it: a welded steel frame with a hanging rail, hooks, a lower shelf and an amber charge lamp under each position, loaded with two cyan and two magenta vests ready for the next session.
Phaser Charging Dock (Laser Tag Arena and Activity Centre)
A 1 m bench dock holding three phasers: a moulded dark tray on feet with shaped grey cradles, a lime status strip across the customer face, and two magenta and one cyan phaser standing in it.
Briefing Screen on a Stand (Laser Tag Arena and Activity Centre)
A 1.24 m briefing screen on a rolling floor stand: four splayed legs, a chrome column and a dark cased head at 1.3 m with a blue picture face and a lime strip along the bottom bezel, for the safety brief before a session goes in.
Scoreboard in a Wall Frame (Laser Tag Arena and Activity Centre)
A 1.9 by 1.05 m scoreboard: a dark framed board with a magenta and a cyan team panel, a lit header strip across the top, a running total bar between them and an amber result flap along the bottom that tips forward when a game ends.
Marshal Headset on a Hook (Laser Tag Arena and Activity Centre)
A marshal headset hanging on its wall hook: a brushed back plate with a lime label, a hooked peg, and a dark headband arching over it and carrying two grey ear cups with lime rings and a short boom microphone.
Reception Desk with Screen (Laser Tag Arena and Activity Centre)
A 2.4 m reception desk: a magenta panelled front with two cyan bands, a pale stone top with a bullnose edge and a staff shelf under it, a raked booking terminal, a card reader on a post and a wristband box, with a row of bright stock boxes across the back of the counter.
Locker Bank (Laser Tag Arena and Activity Centre)
A 1.8 m bank of twelve lockers: a grey steel carcass on a recessed plinth with a capping tray, and two tiers of six doors in alternating cyan and magenta, each with a rotary lock, three vent slots and a number plate.
Waiting Bench (Laser Tag Arena and Activity Centre)
A 1.8 m waiting bench: five birch slats on a pair of folded steel frames with a cross rail and a lime kick band, 450 mm to the seat, for the queue outside the briefing room.
Party Room Table with Chairs (Laser Tag Arena and Activity Centre)
A party room setting: a 1.7 m pale topped table on tapered steel legs with a magenta edge band, laid with four plates, four cups and a row of party boxes, and four moulded chairs round it in cyan, lime, magenta and amber on sled frames.
Vending Machine (Laser Tag Arena and Activity Centre)
A 1.9 m snack vending machine: a grey cabinet on a recessed plinth with a glazing frame across the front, five shelves of bright stock behind it, a magenta brand block in the header, a lime light band, a keypad on the stile and a delivery tray at knee height.
Arcade Cabinet (Laser Tag Arena and Activity Centre)
A 1.86 m upright arcade cabinet: magenta laminate side panels cut to a real sit-in profile, a raked control shelf with two chromed joysticks and six amber buttons, a blue screen recessed behind a dark bezel, a cyan marquee panel over it and a grey plinth at the floor.
Prize Counter with Shelving (Laser Tag Arena and Activity Centre)
A 2.1 m prize counter: a cyan panelled counter with a pale top under a glass display cap on chrome posts, a staff drawer at the back, four prizes on the top, and a four shelf bay behind it stacked with twenty four bright prize boxes.
Air Hockey Table (Laser Tag Arena and Activity Centre)
A 2.2 by 1.2 m air hockey table: a dark cabinet on square feet with a pale playfield, cyan cushion rails all round, a magenta centre line and face-off ring, goal mouths at both ends, and two pucks and two amber mallets on the surface.
Table Football Table (Laser Tag Arena and Activity Centre)
A 1.45 m table football table: a birch cabinet on square feet with a lime playfield and capping rail, eight chromed rods with turned handles, and twenty four moulded players in red and cyan down them.
Soft Play Frame Corner (Laser Tag Arena and Activity Centre)
A 2 m soft play corner: four lime padded posts carrying magenta rails and cyan net bars on two sides, an amber padded floor with a bolster along the open edge, and sixteen play balls loose in it.
Birthday Party Sign (Laser Tag Arena and Activity Centre)
A 1.24 m party sign on two chrome legs: a magenta board with a pale face, a row of cyan letter blocks over a second row, a cross rail at the head and a line of lime bunting flags under it, for the party room door.
Fire Exit Sign (Laser Tag Arena and Activity Centre)
A 360 mm square fire exit sign: a dark backing plate with a lime face and a raised pale running figure and arrow, for the exit route out of the arena.
Queue Marking Tile (Laser Tag Arena and Activity Centre)
A 1 m queue marking tile: a thin dark plate with three amber chevrons pointing the way and a pale pair of footprints to stand on, for the line to the briefing room or the prize counter.
Waste Bin (Laser Tag Arena and Activity Centre)
An 820 mm round waste bin: a grey body with a brushed rim ring and a name plate, a dark drop-in top and a cyan liner pulled over the rim, which is what one looks like on a busy Saturday.
Cleaning Trolley (Laser Tag Arena and Activity Centre)
A housekeeping trolley: a wheeled steel frame with a cyan mop bucket and wringer, a bottle shelf with two lime spray bottles, a bag hoop with its sack in it and a mop stood in the corner.
Ceiling Truss Bay with Light Bars (Laser Tag Arena and Activity Centre)
A 2 m ceiling truss bay with its lighting on it: a 300 mm brushed box truss with spigot plates at both ends, two dark par bars of four magenta lenses each slung under it on hook clamps.
Smoke Machine (Laser Tag Arena and Activity Centre)
A 600 mm smoke machine: a dark cased body on rubber feet with brushed side handles, a chromed nozzle on the front, an amber control panel and fluid gauge and a lime ready lamp on the top.
Laser Tag Centre (Laser Tag Arena and Activity Centre)
A working laser tag centre laid out from the pack's own kit on its own floor: a 14 by 12 m building of 2 m floor tiles, lime marked inside the arena and teal outside it. The arena is a closed 10.3 by 8.3 m bay of wall modules on corner posts, with shooting port panels, mirror...









