Free models · Game-ready GLB
Animated
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,425 free GLB models
AnimatedAir hose reel on a stand (Shipyard and Dry Dock)
A wall or floor standing hose reel wound with compressed air line, on a bolted bracket with a swivel inlet, a guide roller and a coupling hung on the frame. The reel turns.
AnimatedWelding cable reel on a stand (Shipyard and Dry Dock)
A steel drum of heavy welding cable on a braked A frame stand, with a slotted flange, a crank handle, a lead end on a stud and a blank rating plate. The drum turns on its stand.
AnimatedPedestal grinding station (Shipyard and Dry Dock)
A double ended pedestal grinder on a cast base with wheel guards, tool rests, eye shields and a spark tray, beside a steel topped stand with abrasive discs and a chipping hammer on it. The wheel turns.
AnimatedWelding bay screen (Shipyard and Dry Dock)
A three leaf welding screen 3.6 m wide and 2 m tall on castors: a tubular frame with flame retardant curtains, a blank warning plate on the middle leaf and a lead hook at one end. One leaf swings to close the bay.
AnimatedProfile cutting table (Shipyard and Dry Dock)
A 4 m by 2 m downdraught cutting table with a slatted bed, a bridge gantry on rails carrying the torch head and its height sensor, a drive cabinet and a swing arm control screen. The gantry traverses the table.
AnimatedHydraulic press brake (Shipyard and Dry Dock)
A 3 m hydraulic press brake: a welded C frame with two ram cylinders, a punch on the descending beam, a vee die in the bed, a back gauge behind and a foot control on a lead. The ram strokes down and back up.
AnimatedFabrication shed door bay (Shipyard and Dry Dock)
The gable end of an 8 m span shed with a 5 m by 4 m insulated roller shutter in its own frame, a wicket beside it and a blank sign panel over the opening. The shutter rolls up into its hood.
AnimatedThree roll plate bending machine (Shipyard and Dry Dock)
A pyramid plate roller 2.6 m between housings: two driven bottom rolls, a pinching top roll, a geared drive end, a drop end for releasing a rolled shell and a pedestal control station. All three rolls turn.
AnimatedCrane man basket in its stillage (Shipyard and Dry Dock)
A two person crane basket with mesh sides, a gated entry, a rigid yoke and a single lifting eye, standing in the steel stillage it is parked and inspected in. The basket lifts straight out of the stillage.
AnimatedCrawler crane with lattice boom (Shipyard and Dry Dock)
Tracked lattice boom crane for yard lifts: twin crawler tracks on a carbody, a slewing upper with counterweight, operator cab and winch drums, and a 14 m lattice boom raked over the front. The upper slews and the hook hoists with it.
AnimatedPillar jib crane, 7 m reach (Shipyard and Dry Dock)
Bolted down pillar jib crane 8.6 m tall with a 7 m tie braced jib, a slew ring at the column head, an electric hoist on the jib and a hook block under it. The jib slews through a full circle and the hook hoists with it.
AnimatedOverhead travelling crane, 8 m span (Shipyard and Dry Dock)
Single girder underslung overhead crane for a fabrication shed: a box bridge hung from two end carriages on rail mounted wheels, a crab with its gearbox and drum, and a hook block under it. The crab traverses the bridge and the hook hoists with it.
AnimatedDock gantry crane, 24 m span (Shipyard and Dry Dock)
Rail mounted portal gantry spanning a graving dock: braced A legs on four wheel bogies, twin box girders 14 m up with a walkway, a machinery house and a crab whose hook block hangs between the girders. The crab traverses and the hook hoists.
AnimatedBow thruster tunnel unit (Shipyard and Dry Dock)
A 2.2 m bore thruster tunnel section on a transport stillage, ready to be let into a bow: plated tunnel with flanged ends, a grid over each mouth, the impeller and its gear leg inside, and lifting eyes on the frame.
AnimatedPropeller and tailshaft in a cradle (Shipyard and Dry Dock)
A four bladed fixed pitch propeller 3.2 m in diameter on its drawn tailshaft, cradled on timber bearers for survey: pitched blades on a bossed hub, a keyed taper, a rope guard ring and a cone nut.
AnimatedCamp Gate with Blank Sign Board (Safari Camp and Bush Lodge)
A 3.6 m camp entrance: two heavy timber posts under a lintel, a hanging sign board left blank on both faces to letter, and a 2.5 m braced gate hung on the left post. The gate is one node and swings on the clip. Meets the pole and wire fence on the same ports.
AnimatedSpotting Scope on a Tripod (Safari Camp and Bush Lodge)
A 1.45 m spotting scope on a timber tripod: a straight body with an objective bell, an eyepiece, a focus wheel and a pan arm. The scope and head are one node and pan on the clip; the focus wheel does not turn.
AnimatedCamera on a Tripod (Safari Camp and Bush Lodge)
A 1.65 m camera tripod with braced legs, a pan head and a generic long lens camera on it. The head, arm and camera are one node and pan on the clip; the legs do not extend.
AnimatedOpen Game Drive Vehicle (Safari Camp and Bush Lodge)
A 4.9 m open sided game viewing vehicle: a blank panelled olive body, an open windscreen frame, three stepped bench rows under two roll hoops, a rear step and four 0.84 m wheels. Invented shapes, no marque or livery. The wheels are nodes on their axles and roll on the clip.
AnimatedSkid Mounted Water Bowser (Safari Camp and Bush Lodge)
A 2.2 m water bowser: a 1.1 m diameter tank in two steel cradles on a towable skid with a hitch, a filler hatch on top and an outlet with a gate tap at the back. The tap handle is one node and turns on the clip; the water is not modelled.
AnimatedCamp Battery Box (Safari Camp and Bush Lodge)
A 0.9 by 0.6 m vented steel battery box on a timber pallet base, 0.58 m high, with side handles, a cable gland on the front and a lid hinged along the back. The lid is one node and lifts on the clip.
AnimatedKitchen Boma with Grill and Hanging Pot (Safari Camp and Bush Lodge)
A 3.4 by 2.6 m bush kitchen: a split pole screen on three sides with the front open, a stone kerbed hearth under a steel grill, and a pot hung from a swung out timber arm. The pot is one node on its hook and swings on the clip; the screen and grill are static.
AnimatedCamp Drinks Cooler (Safari Camp and Bush Lodge)
A 0.86 by 0.5 m hard cool box 0.54 m high with moulded side handles, a front latch and a lid hinged along its back edge. The lid is one node and lifts on the clip.
AnimatedLarge Thatched Rondavel (Safari Camp and Bush Lodge)
A round bush guest hut 5.2 m across with rendered earth walls 2.5 m to the eaves, a timber door frame and a conical thatch roof on a timber eaves plate. The plank door swings on its jamb; the thatch is a solid cone and does not move. Exterior model: there is no interior.