Free models · Game-ready GLB
Assets
Every model here is a game-ready GLB that drops into three.js, Blender, Godot, Unity and Unreal, free to use in personal and commercial work without crediting anyone.
Files are binary glTF with embedded WebP textures and quantized geometry, which three.js reads natively and Blender, Godot and Unity import as they are, so nothing needs a Draco or KTX2 decoder. Each asset page carries a permanent CDN URL you can load straight from your code.
19,266 free GLB models
Fuel and Charging Station (Go Kart Track and Pit Lane)
Bunded refuelling and charging point on a kerbed concrete plinth: a red fuel cabinet with a nozzle on its hose, a blue charge post with two leads and a canopy plate, and a fire point. Hoses and leads are modelled solid and do not move.
Tool Trolley (Go Kart Track and Pit Lane)
Red four drawer tool trolley on four castors with a steel worktop, a push handle and a few tools left on the lid. Drawers and castors are modelled solid on this one and do not open or turn; the pit garage bay is what carries a moving part.
Tyre Stack (Go Kart Track and Pit Lane)
Stack of five kart tyres 1.1 m high with a red and a blue marker tyre banded through it, a yellow cap disc on top and a strap rod down the side. Fits the tyre wall family, so a paddock stack and a barrier read as the same rubber.
Kart Storage Rack (Go Kart Track and Pit Lane)
Two tier steel storage rack 1.5 m wide holding two hire chassis, one red and one blue, on runner shelves with edge lips and a red top rail. The stored chassis are simplified to tray, seat, nose and wheels and do not move.
AnimatedPit Garage Bay Module (Go Kart Track and Pit Lane)
One 5 m pit garage bay, 6 m deep and 3.1 m to the roof: half thickness party walls, a back wall with a steel bench, a strip light, a blue header with a bay number plate and a ribbed roller shutter that lifts in its guides.
Paddock Apron Tile (Go Kart Track and Pit Lane)
Plain poured concrete apron on the same 8 m ground module, its slab scored into four bays by expansion joints. The unmarked companion to the pit lane tile, for paddock, garage forecourt and parking ground. Four ground ports.
Pit Lane Tile (Go Kart Track and Pit Lane)
Pit lane surface on the 8 m ground module: a concrete slab with a red boundary line on the track side, a yellow fast lane line down it and one working bay boxed out in white against the garage side. Four ground ports.
Flag Post and Marshal Post (Go Kart Track and Pit Lane)
Marshal post: a raised 2.4 m concrete stand with a yellow double rail on three sides, an extinguisher on the deck, and a 3.1 m flag post beside it carrying a yellow and a red flag panel. The flags are modelled as rigid panels and do not move.
Track Sign Set (Go Kart Track and Pit Lane)
Pair of circuit signs on concrete footings: a 2.1 m post with a yellow chevron board and a red warning plate, and a 1.6 m post with a blue direction arrow. Symbols are plain shapes and name no series, circuit or maker.
Bollard Cone (Go Kart Track and Pit Lane)
Tall 0.84 m bollard cone on a heavy square base with two white bands, for a pit entry, a lane split or a closed gate. Same family as the apex cone, scaled up and double banded so it reads from a distance.
Timing Loop Strip (Go Kart Track and Pit Lane)
Transponder timing loop laid across an 8 m corridor: a bonded charcoal strip with a yellow marker tape each side and a small roadside reader box on the verge. Sits on the tarmac, so it drops on a straight wherever a split is taken.
Apex Marker Cone (Go Kart Track and Pit Lane)
Small red apex cone 0.37 m tall on a square weighted base with a white reflective band, the marker a clerk drops on an apex or a braking point. Static geometry; the cone is one solid, so it never tips.
Barrier Board with Advertising (Go Kart Track and Pit Lane)
Four metre advertising hoarding for the outside of a barrier: a blue board 0.9 m high on two steel posts with back stays, blocked out in yellow and red, and a dark capping rail. Panels are invented blocks of colour and carry no wording or logo.
Tyre Wall Barrier Corner (Go Kart Track and Pit Lane)
The tyre wall turned through ninety degrees: two 2 m arms of three courses meeting at a knuckle tyre, with the yellow strap board carried round both faces and a steel post at each open end. Barrier ports on both arms.
AnimatedStart Finish Gantry (Go Kart Track and Pit Lane)
Start and finish gantry spanning a 10 m corridor on two 4.5 m steel legs with concrete pad footings: a braced box beam, a red and yellow banner panel and a five lamp start light panel hung below it that tilts on its own pivot.
Kerb Section Red and White (Go Kart Track and Pit Lane)
Four metre apex kerb, 0.5 m wide, rising from 50 mm at the track edge to 85 mm at its back lip, in white concrete with four red bands laid proud of the slope. Start and end kerb ports, so a run follows a corner in 4 m steps.
Tyre Wall Barrier Section (Go Kart Track and Pit Lane)
Four metre tyre wall: three courses of six bolted tyres 0.66 m high with red and blue marker tyres banded through them, a steel end post each end and a yellow strap board along the track face. Start and end barrier ports.
Run Off Gravel Tile (Go Kart Track and Pit Lane)
Gravel trap tile on the 8 m ground module: a raked pea gravel bed with a scatter of larger stones, for the run off behind a tyre wall. Four ground ports, so it lays flush against tarmac, pit concrete and its own neighbours.
Grid Box Marking Tile (Go Kart Track and Pit Lane)
Start grid tile: the same 8 m tarmac module with a white start line across it and six staggered grid boxes painted in two rows, the spacing a kart grid uses. Four ground ports, so it drops into a straight in place of a plain tile.
Track Surface Tile Straight (Go Kart Track and Pit Lane)
Straight 8 m tarmac circuit tile on a 0.12 m slab, with a white edge line down each side of the 8 m racing corridor. Four ground ports, one per edge, so straights, corners and pit tiles lay as one continuous surface.
Track Surface Tile Curve (Go Kart Track and Pit Lane)
Ninety degree corner tile on the same 8 m module: the corridor enters the west edge and leaves the south edge, the outer edge is lined in white and the apex arc is dotted round the inside. Four ground ports, one per edge.
AnimatedKart on Trolley Stand (Go Kart Track and Pit Lane)
A hire kart sitting on its trolley, wheels clear of the floor, the way a paddock stores and moves one. Trolley castors and kart wheels are all pivoted nodes, so the roll clip turns every wheel on the assembly at once.
Spare Seat and Steering Wheel Rack (Go Kart Track and Pit Lane)
Paddock spares rack 1.6 m wide: two bucket seats hooked over the top rail in red and blue and two steering wheels on pegs below, on a welded steel A frame with a low kick rail. Static geometry, for dressing a garage or a workshop wall.
AnimatedKart Trolley (Go Kart Track and Pit Lane)
Empty steel kart trolley: a two rail deck 0.5 m off the floor on four legs, an end brace each end, a lower shelf rail and a red topped push handle, running on four castors that each turn on their own pivot.