Roads infrastructure
460 free GLB models
Every roads infrastructure below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution. Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
Lashed double ladder (Mountaineering and Summit Expedition)
Two ladder sections overlapped and lashed into one 6.8 m span, with hand lines on stakes either side.
Crevasse ladder (Mountaineering and Summit Expedition)
Single 4.2 m aluminium ladder with channel rails and round rungs, whipped at both ends with anchor cord.
Closure rope line (Backcountry Snowboarding and Avalanche Safety)
Five-metre closure line on three drifted posts with a sagging rope, hanging pennants, a small board and a spare coil.
Avalanche warning sign (Backcountry Snowboarding and Avalanche Safety)
Two-post hazard sign with a triangular board carrying an abstract slab symbol and a five step danger scale panel below.
Trailhead map board (Backcountry Snowboarding and Avalanche Safety)
Two-post trailhead board with a snow-laden pent roof, an abstract contour map panel, route marking and a register box.
Wind sock (Backcountry Snowboarding and Avalanche Safety)
Guyed wind sock on a three-metre mast with a swivel head, mounting ring and a banded tapered sock.
Helicopter pad marker (Backcountry Snowboarding and Avalanche Safety)
Stamped snow landing pad marked with mat panels, a trodden ring and four corner markers carrying flags.
Cordon fence corner (UFO Crash Site and Recovery Facility)
A right-angle cordon corner turning a taped line through 90 degrees, with ports on the west and south arms.
Cordon fence run (UFO Crash Site and Recovery Facility)
A 4 m cordon run: three footed posts, two tubular rails, a taped line and a blank warning plate. Ports at both ends so runs chain.
Timber telegraph pole (Arable Fields and Farm Machinery)
An 8.6 m creosoted timber pole carrying two crossarms with six insulators and short line wire stubs, a stay wire to a ground anchor, a cable box and step bolts.
Perimeter Gate (Airport Terminal and Ground Operations)
Airside perimeter sliding gate: two capped portal posts on cast pads, a ground rail, a mesh gate leaf on a named sliding node with hazard panels and rollers, and a guard kiosk with a card reader and a camera mast.
Perimeter Fence Run (Airport Terminal and Ground Operations)
Eight metre airfield perimeter fence bay: three posts on cast pads carrying a mesh panel with vertical wires and three line rails, angled top arms with three strand wires and a blank warning plate.
Stand Guidance Display (Airport Terminal and Ground Operations)
Visual docking guidance display: a two post frame carrying a large dark alignment screen with a centre bar and closing-rate strip, a coloured header hood and a ground level operator panel.
Jet Blast Fence (Airport Terminal and Ground Operations)
Eight metre jet blast deflector fence: five braced portal posts on pad bases carrying nine angled louvre panels, a coloured capping rail with obstruction lights and a chevron kick band along the base.
Taxiway Sign (Airport Terminal and Ground Operations)
Frangible taxiway guidance sign: a low double-sided board on two breakaway posts with a yellow direction panel and a dark mandatory panel divided by a white bar, with blank legend blocks.
Apron Floodlight Mast (Airport Terminal and Ground Operations)
Twelve metre apron floodlight mast: a tapered pole on a cast pad with a climbing ladder, a head frame carrying five raked floodlights, a rear walk rail and a red obstruction light on the crown.
Apron Paving Tile (Airport Terminal and Ground Operations)
Eight metre plain apron paving tile: the same scored slab with bay joints and a single corner reference patch and no route markings, for filling the open apron between marked stands and taxiways.
Taxiway Tile (Airport Terminal and Ground Operations)
Eight metre straight taxiway paving tile: a scored slab with a painted centreline, double edge lines and four inset edge lights, laid on the apron port grid.
Taxiway Tile Curve (Airport Terminal and Ground Operations)
Eight metre quarter turn taxiway tile: the same slab with a curved centreline and curved double edge lines swinging a route from travel along X to travel along Z, with inset lights on the inner shoulder.
Stand Marking Tile (Airport Terminal and Ground Operations)
Eight metre aircraft stand paving tile: a scored concrete slab painted with a lead-in line, a stop bar and turn bar, hatched equipment restraint areas either side, safety lines and an outlined equipment parking box.
Baggage Chute (Airport Terminal and Ground Operations)
Make-up hall baggage chute: a deep steel slide trough with amber rub rails and cross cleats, carried on a braced portal frame, fed from a hooded head box at the top and ending in an amber delivery lip over the loading position.
Reclaim Carousel (Airport Terminal and Ground Operations)
Circular flat-plate baggage reclaim carousel: a 4.8 m skirted drum with a stainless kerb, twenty tilted carrier plates, a domed centre island, a screen wall with a real bored injection opening and a double-sided flight display on a mast.
Baggage Sorting Junction (Airport Terminal and Ground Operations)
Two metre baggage sorting junction: a square transfer deck with roller cleats, a fixed back guard, a hinged pusher paddle on a named pivot and a control column with a status screen, splitting a run into a straight and a right-hand branch.
Baggage Belt Incline (Airport Terminal and Ground Operations)
Four metre inclined baggage conveyor rising one metre: the same belt bed and guards set on a 14 degree climb, on stepped legs, for lifting a run from the make-up floor to a reclaim feed.