Free models · Game-ready GLB
Assets
Every model here is a game-ready GLB that drops into three.js, Blender, Godot, Unity and Unreal, free to use in personal and commercial work without crediting anyone.
Files are binary glTF with embedded WebP textures and quantized geometry, which three.js reads natively and Blender, Godot and Unity import as they are, so nothing needs a Draco or KTX2 decoder. Each asset page carries a permanent CDN URL you can load straight from your code.
19,161 free GLB models
First aid box, 0.36 m (Woodworking Workshop and Joinery)
Green wall mounted first aid box with a raised cream cross, a charcoal catch and a hinged lid, fixed at working height beside the bench run.
Fire extinguisher on a stand, 0.7 m (Woodworking Workshop and Joinery)
Red nine litre extinguisher on a charcoal floor stand: a domed body, a brass valve head with its lever and gauge, a hose and horn clipped to the side and a blank cream label band.
Sawdust collection bag, 0.9 m (Woodworking Workshop and Joinery)
Full collection bag off the extractor: a cream sack on a timber pallet, slumped under its own weight, tied at the neck with a charcoal strap and a blank content label on the side.
Broom and dustpan, 1.4 m (Woodworking Workshop and Joinery)
Shop broom with a charcoal bristle head on a 1.3 m timber handle, standing back against a wall, with a red dustpan and its brush on the floor beside it.
AnimatedWorkshop trolley, 0.9 m (Woodworking Workshop and Joinery)
Three shelf steel trolley on four castors with a push handle, loaded with cut parts, a tin of finish and a clamp, for moving a job between the bench, the machines and the finishing corner.
Drying rack for finished parts, 1.4 m (Woodworking Workshop and Joinery)
Steel drying rack 1.4 m wide and 1.8 m tall: six levels of timber battens carrying finished ply and hardwood parts on edge, so a batch can air off without touching.
Finishing table, 1.2 m (Woodworking Workshop and Joinery)
Grey steel finishing table with a cream turntable top, a part in the middle being oiled, an open tin with its brush, a rag and a stack of finishing pads on the lower shelf, set in the corner a joiner keeps clean.
Offcut bin, 0.9 m (Woodworking Workshop and Joinery)
Timber sided offcut bin on skids, 0.9 m by 0.6 m, filled with short ends and ply strips standing at the angles they were thrown in at, with a stencil plate on the front.
Glue and finish shelving, 0.9 m (Woodworking Workshop and Joinery)
Steel shelving unit 0.9 m wide and 1.5 m tall with three shelves of workshop stock: tins of finish and stain, glue bottles, a jar of brushes, rag rolls and a measuring jug, all with blank labels.
Panelled door on a stand, 2 m (Woodworking Workshop and Joinery)
Finished four panel door 2 m tall in hardwood with raised ply panels, a steel lever handle and two hinges, standing upright in a timber stand with a back brace, the way a finished job waits for collection.
Timber rack with boards, 2.3 m (Woodworking Workshop and Joinery)
Blue cantilever timber rack 2.3 m wide and 2.25 m tall on bolted foot plates, with four pairs of raked arms carrying a full load of sawn hardwood and softwood boards in mixed widths and thicknesses.
Sheet material rack with ply, 2.5 m (Woodworking Workshop and Joinery)
Upright sheet rack 2.5 m wide: a steel base frame with charcoal dividers and a back leaning post, holding five birch ply and MDF sheets on edge with their faces clear of the floor.
Timber rack, part loaded, 2.3 m (Woodworking Workshop and Joinery)
The same cantilever rack after a run of work: the lower arms still carrying boards and the upper arms nearly clear, for a shop that has been using its stock.
Sharpening station, 0.7 m (Woodworking Workshop and Joinery)
Sharpening bench in pine: a charcoal stone pond holding a coarse and a fine waterstone, a leather strop on its block, a honing guide, a water jug and a lower shelf of stone boxes, set at the height a joiner touches up an iron.
Bench plane, 360 mm (Woodworking Workshop and Joinery)
Number five jack plane: a flat steel sole, a blue japanned body, the iron and red lever cap set at the mouth, a timber tote and front knob, sitting on its sole the way it is left on the bench.
Mallet and chisel set on a tray, 0.5 m (Woodworking Workshop and Joinery)
A joiner's mallet standing in a shallow pine tray with three bench chisels laid beside it and a marking gauge: handles, ferrules and ground bevels modelled, for dressing a bench or an assembly table mid job.
Clamp rack with sash clamps, 1.8 m (Woodworking Workshop and Joinery)
Steel A frame clamp rack on castors holding six 1.5 m sash clamps: each clamp is a steel bar with a red head casting, a sliding tail on its pin and a screw with a timber T handle, racked the way a shop keeps them beside the assembly table.
AnimatedRolling tool chest, 1 m (Woodworking Workshop and Joinery)
Red seven drawer tool chest on four castors: a timber worktop, steel drawer pulls on every front, a side handle and a lower cupboard, with every drawer opening on its runners.
Sawhorse pair, 1 m (Woodworking Workshop and Joinery)
Two site built timber sawhorses with 1 m top beams, splayed legs, gussets and a lower tie, set out as a pair at working distance so a board or a door can be laid across them.
Tool wall panel with hand tools, 1.6 m (Woodworking Workshop and Joinery)
Wall hung tool board 1.6 m by 1 m: a pale ply panel in a timber frame, carrying four bench chisels on their rack, a tenon saw on its pegs, a bench plane on its shelf, two try squares, a mallet and two F clamps, each tool modelled as the real thing.
AnimatedJoiner's workbench with vice, 2 m (Woodworking Workshop and Joinery)
Laminated hardwood bench 2 m long on square legs and stretchers: eight glued top boards with a row of round dog holes, a front apron, a lower pine shelf and a cast front vice whose timber faced jaw slides out on its screw.
Assembly table, 1.8 m (Woodworking Workshop and Joinery)
Low assembly table 1.8 m by 1.1 m on a blue welded frame: a birch ply top on a torsion box grid with a field of dog holes, a lower shelf carrying two clamps and adjustable feet, built at 800 mm so a carcass can be squared up on it.
AnimatedMobile machine base, 0.8 m (Woodworking Workshop and Joinery)
Adjustable steel machine base: a welded rectangular frame with four corner brackets, a yellow foot lever and four castor wheels, so a planer or a band saw can be rolled out of the way and set down again.
AnimatedRouter table, 0.95 m (Woodworking Workshop and Joinery)
Enclosed router table: a blue cabinet with a cream laminated top and a steel insert plate, a split charcoal fence with its dust port and guard, a start and stop station on the front, and the router cutter turning in the opening.