3D Assets
@3dassets
Plant Wall Panel (Nuclear Power Station and Control Room)
A 4 by 4 m precast wall panel 300 mm thick with a stiffening rib at each end and a painted band at waist height. End ports run it into a continuous wall.
Hillside Estate and Open Cellar (Vineyard and Winery)
A 40 x 32 m working wine estate. Six trellised rows run across cultivated soil west of the drive, bare at the near end, in full leaf in the middle and hanging with fruit at the far end, closed at both ends by raked end posts on their anchors and held by a terrace wall along...
Stone Wall Section (Vineyard and Winery)
Four metre stone wall bay 2.96 m tall and 420 mm thick, faced in rough coursed rubble on both sides with a stepped coping over it. Butts end to end and into the corner pillar.
Tile Roof Section (Vineyard and Winery)
Four metre pantiled roof module spanning 5 m: a ridge beam, a rafter plate each side, fifty four half round pantile runs down the slopes and a ridge run over the top, with the eaves overhanging front and back. Lays end to end along a ridge.
Stone Floor Tile (Vineyard and Winery)
Two metre flagstone floor module: six flags of four sizes bedded in grit, each laid a little proud of the bed so the joints read. Tiles edge to edge across a courtyard or a cellar floor.
Stone Corner Pillar (Vineyard and Winery)
Square stone corner pillar 620 mm on plan and 3.5 m tall with proud facing stones on all four sides, a projecting cap and a pyramid top. Takes the ends of two wall bays meeting at a corner.
AnimatedStone Arch Gateway (Vineyard and Winery)
Stone gateway 4.8 m wide with a 3.2 m semicircular arch on two faced piers, capped and coped, hung with a pair of boarded oak gates on strap hinges that swing open into the courtyard.
AnimatedYard Gate (Vineyard and Winery)
Three metre five bar timber field gate on two turned posts with pointed caps: five horizontal bars, two heels, a diagonal brace, strap hinges and a drop latch. The leaf swings on its hanging post.
AnimatedFarmhouse Front (Vineyard and Winery)
Seven metre rendered stone farmhouse front, 5.2 m to the eaves: a lintelled doorway with a boarded oak door, four windows with stone surrounds, glazing bars and painted shutters that fold back, a corbelled eaves course and rubble facing across the whole wall.
Tasting Stool (Vineyard and Winery)
Round topped timber stool 765 mm tall on four splayed legs with two stretcher pairs, a dished seat and metal foot cups. Pulls up to the tasting counter.
Chalkboard (Vineyard and Winery)
Framed chalkboard 1.2 m wide on a folding easel leg, carrying abstract chalk marks only: three bars, two ticks and a ring, with a chalk resting on its ledge. Deliberately wordless, so it names nothing.
Tasting Glasses (Vineyard and Winery)
Oak tray 460 x 320 mm carrying six tasting glasses, each with a foot, a drawn stem and a tapered bowl; three of them hold a static pour. Sits on the tasting counter.
Spittoon (Vineyard and Winery)
Floor standing tasting spittoon 1.05 m tall: a weighted base, a column and a stainless funnel bowl with a rolled rim over a collecting body. The contents are static geometry.
Tasting Counter (Vineyard and Winery)
Three metre tasting counter: a coursed stone base with proud face stones, a thick oak top overhanging front and back on a shadow rail, three open bottles standing on it and a serving board at one end.
AnimatedRiddling Rack (Vineyard and Winery)
Timber riddling rack 1.4 m wide: an A frame of two leaning boards with sixty four bottle holes, unlabelled bottles set neck down in them, on four braced legs, so the whole frame tilts about its ridge.
Wine Rack (Vineyard and Winery)
Timber wine rack 1.2 x 1.8 m with eight shelves and dividers, holding about forty five unlabelled bottles lying neck out with gaps where bottles have been taken. Stands against a cellar wall.
AnimatedLabelling Head (Vineyard and Winery)
Bench labelling head 1.6 m tall with two reels of blank label stock on their spindles, a web running down over a guide plate, a press roller and a bottle in the cradle. The reels turn; the label web is static and carries no printing.
Bottle Crate (Vineyard and Winery)
Timber twelve bottle crate 620 x 460 x 360 mm with a slatted floor and a lattice of dividers, holding twelve unlabelled bottles lying on their sides. Blank, with no stencil or mark on any face.
AnimatedCorker (Vineyard and Winery)
Floor standing bottle corker 1.4 m tall: a cast base with a bottle seat, twin columns, a compression jaw head and a lever driven plunger that drives down into the neck, with a tray of loose corks beside it.
AnimatedBottling Line Section (Vineyard and Winery)
A 2.6 m bay of bottling line: a roller conveyor whose sixteen rollers turn as one, five bottles standing on it, a four nozzle filling bridge over the run and a control box on the frame. The wine and the pipework are static.
Wine Bottle (Vineyard and Winery)
Blank 750 ml wine bottle 325 mm tall with a punted body, a sloped shoulder, a finished neck and a plain foil capsule. Deliberately unlabelled, so it carries no brand, estate or vintage.
Sample Thief (Vineyard and Winery)
Glass sample thief 780 mm long standing in its turned holder: a tapered barrel, a narrowed foot, a thumb stop at the head and a collar where it sits in the stand. Used to draw a sample from a barrel.
AnimatedPump Trolley (Vineyard and Winery)
Cellar transfer pump on a two wheeled trolley: a stainless pump head and motor on a frame, two hose tails, a push handle and three coils of hose hung over it. The hoses are solid static geometry, not simulated.
Hydrometer Stand (Vineyard and Winery)
Bench hydrometer stand 540 mm tall: a turned base, a test cylinder on a support rod with a floating hydrometer in it, a tick scale up the stem and a small tray for the sample. No readings are printed.