3D Assets
@3dassets
Control Rod Stand (Nuclear Power Station and Control Room)
A stand of five spare control rod clusters: 3.4 m absorber fingers hanging from their spiders in a bolted frame with two guide beams, on a footed base plate with a trefoil on the front.
Fuel Assembly on Cradle (Nuclear Power Station and Control Room)
A 4 m square fuel assembly lying on its handling cradle: a thirty six rod bundle with five spacer grids and both end nozzles, strapped across two bolsters on a wheeled frame with a lifting bail at one end.
AnimatedFuel Lifting Flask (Nuclear Power Station and Control Room)
A 1.7 m diameter shielded transfer flask 2.7 m tall: a finned body on a transport base, two lifting trunnions, a machined seal face and a bolted lid hinged at the back, with a trefoil on the flank.
Spent Fuel Storage Rack (Nuclear Power Station and Control Room)
A 1.56 m square storage rack for a fuel pond: thirty six neutron absorbing cells on a 260 mm pitch, 2.4 m deep, on a footed base plate with levelling pads and four lifting eyes.
Spent Fuel Pond Corner (Nuclear Power Station and Control Room)
The pond bay with a second coping kerb and handrail down its side edge, for closing the end of a pond. Its two ports face along each kerb.
Spent Fuel Pond Edge (Nuclear Power Station and Control Room)
A 4 m bay of spent fuel pond: a concrete coping kerb along one edge with a handrail and a trefoil badge, a skimmer weir let into it, the lined floor of the basin and the water surface 240 mm down. End ports run it into a pond of any size.
AnimatedReactor Hall Gantry Crane (Nuclear Power Station and Control Room)
A 12 m span portal crane 9 m to the bridge: braced legs on rail trucks with access ladders, twin box girders with a grating walkway and handrail, and a crab carrying the rope drum and its motor.
AnimatedRefuelling Machine (Nuclear Power Station and Control Room)
A portal refuelling machine on travelling trucks, 8 m between legs and 5.4 m to the bridge: twin girders with a grating walkway and handrail, a traversing trolley and a telescopic mast with a gripper hoist under it, plus an operator platform and ladder on one leg.
AnimatedCrane Hook Block (Nuclear Power Station and Control Room)
A two sheave hook block set down on the floor under its rope: a plate body with side sheaves, a swivel hook with a safety catch and a painted badge on the cheek. The block runs up and down on its own node.
Reactor Vessel Head with Control Rod Drives (Nuclear Power Station and Control Room)
A 5.8 m reactor vessel head: a bolted flange with twenty four nuts, a domed shell, and thirty seven control rod drive mechanisms standing on it in four rings, tied by a seismic support ring, with four lifting lugs and a blank rating plate.
Reactor Cavity Ring (Nuclear Power Station and Control Room)
The concrete cavity the vessel sits in: a 7.2 m stepped pit 1.8 m proud of the floor with a 5 m bore, a machined seal ledge and twenty four hold-down studs round it, edge protection on two sides and a trefoil on the kerb.
Containment Dome Section with Equipment Hatch (Nuclear Power Station and Control Room)
The containment section with a 3 m equipment hatch cast through the wall: a recessed barrel and a bolted steel cover on sixteen studs, at 2.6 m above the floor.
Containment Dome Section (Nuclear Power Station and Control Room)
A 90 degree cutaway section of a containment shell: an 800 mm concrete wall 7 m high on a haunched plinth, curving into the dome and sawn off at a ring beam 12 m up, with five buttresses and the steel liner inside. Two sections back to back make a half shell to look into.
Access Ladder with Hoops (Nuclear Power Station and Control Room)
A 3.6 m galvanised cage ladder: 34 mm rungs between channel stiles, hoop guards from 2.2 m up on a back stringer, and two wall brackets holding it off the structure.
Stair Tower (Nuclear Power Station and Control Room)
A bolted steel stair tower climbing 4 m in two flights round a half landing: ten grating treads a flight on channel stringers, a grating landing at each level on edge beams, four corner columns, and a sloped rail on posts up both sides of every flight.
Handrail Run (Nuclear Power Station and Control Room)
A 4 m run of plant handrail: a 48 mm top rail and a knee rail on three flanged posts, with a toe plate along the bottom and a painted band at each post. End ports run it round a floor edge.
Walkway Grating Section (Nuclear Power Station and Control Room)
A 4 by 1.2 m galvanised walkway panel: 40 mm bearing bars on 130 mm centres with cross bars, edge angles and a bearer at each end. End ports run it into a walkway of any length.
Plant Roof Slab (Nuclear Power Station and Control Room)
A 4 by 4 m roof bay: a 240 mm slab on two downstand beams and a cross beam, with a kerbed rooflight in the middle. End ports run it across an annex.
AnimatedBlast Door (Nuclear Power Station and Control Room)
A shielded blast door in a rebated steel frame: a 200 mm leaf on three knuckle hinges with a five spoke dogging wheel, four locking lugs down each stile and a trefoil badge at head height. It fits the doorway in the wall panel.
Plant Wall Panel with Doorway (Nuclear Power Station and Control Room)
The wall panel with a 1.3 by 2.3 m doorway cast through it and a steel jamb lining set into the reveal, sized for the blast door and the airlock pair in this pack.
AnimatedAirlock Door Pair (Nuclear Power Station and Control Room)
A personnel airlock: two glazed steel leaves 1.1 m apart in their own jamb frames, hung on opposite stiles with grab rails and vision panels, under a galvanised ceiling panel with an interlock lamp on it.
AnimatedPlant Floor Slab with Hatch (Nuclear Power Station and Control Room)
The floor bay built as a kerbed frame round a 1.2 m service opening, closed by a lift-off galvanised grating cover on a steel angle kerb.
Plant Floor Slab, Hazard Marked (Nuclear Power Station and Control Room)
The floor bay with a painted chevron keep-clear marking standing 4 mm proud of the slab, for the ground under a crane hook or in front of a switchgear cubicle.
Plant Floor Slab (Nuclear Power Station and Control Room)
A 4 by 4 m cast floor bay 300 mm thick with chamfered edges and a recessed lifting socket at each corner. Four ports on the bay edges tile it out into a plant floor of any size.