3D Assets
@3dassets
Telephone Rack (Nuclear Power Station and Control Room)
A 900 mm telephone rack for a control room wall: a channel frame carrying four cradles with their handsets in them, one on the direct line in red, each with a small dial and a pair of lamps.
AnimatedKey Cabinet (Nuclear Power Station and Control Room)
A 600 mm wall key cabinet: a painted case with three hook rails and twenty one tagged keys on them, behind a glazed door with a knob. The door swings on its own node.
AnimatedOperator Chair (Nuclear Power Station and Control Room)
A five star operator chair on castors: a gas lift column, a padded seat and back on a steel frame, and two arms. Everything above the column swivels on one node.
AnimatedShift Log Desk (Nuclear Power Station and Control Room)
A 1.5 m shift log desk: a bullnosed top on a braced frame with a two drawer pedestal, the open log book and a pen tray on it, and an anglepoise lamp at the back corner. Both drawers run out on their own nodes.
AnimatedSupervisor Chair (Nuclear Power Station and Control Room)
The operator chair built taller, with a high back and a headrest pad, for the supervisor at the back of the room.
AnimatedScram Button Pedestal (Nuclear Power Station and Control Room)
A floor pedestal carrying a guarded trip push: a cast base and column, a raked head with a 150 mm red mushroom, a hinged clear guard over it that lifts, a badge on the column and a blank tag under the push.
Alarm Annunciator Panel (Nuclear Power Station and Control Room)
A 1.6 m alarm annunciator: eighteen window tiles in a recessed face, some lit red and amber, with accept, reset and test pushes and a sounder grille on the bottom rail. Every window is blank, so no fault is named.
Rod Position Display (Nuclear Power Station and Control Room)
A pedestal mounted rod position display: a raked head 1 m wide carrying a forty eight cell lamp matrix with a third of the cells lit, a row of selector switches under it and a blank tag strip between them.
Mimic Wall Board (Nuclear Power Station and Control Room)
A 4 m mimic board on its own feet: a framed panel with a recessed face, raised flow lines linking abstract plant symbols and a lit lamp at every node, with a blank tag strip along the bottom.
Mimic Wall Board, Narrow (Nuclear Power Station and Control Room)
The mimic board in a 2 m width, for a shorter wall or a single system panel beside the desk.
Analogue Dial Bank (Nuclear Power Station and Control Room)
A 1.1 m instrument panel 2 m tall carrying twelve bezelled analogue dials in a recessed fascia, with three edgewise meter windows below them and a blank tag strip along the bottom.
AnimatedCurved Control Desk (Nuclear Power Station and Control Room)
A three bay control desk on a 2.6 m arc, 4.6 m across the ends: each bay a plinth and carcass with a postformed bench top, a raked switch fascia and an upright instrument head carrying dials, lamp tiles and blank tag strips, with two rocking selector levers on the middle bay.
AnimatedSwitch Panel Console (Nuclear Power Station and Control Room)
A 1.2 m floor standing switch panel 2.1 m tall: a recessed fascia with four rows of toggle switches and indicator lamps, a row of dials across the head, blank tag strips and a hinged back door for the wiring.
AnimatedStrip Chart Recorder (Nuclear Power Station and Control Room)
A 420 mm bench recorder: a painted case on rubber feet with a glazed front, a paper drum turning slowly behind it, a pen carriage across the chart and three lamps and a blank tag on the bottom rail.
AnimatedValve Handwheel Bank (Nuclear Power Station and Control Room)
A manifold stand of six isolating valves between two headers, 2.4 m wide and 2.3 m tall: each valve a bonneted body on a side-mounted stem with a spoked handwheel that turns, with a blank tag strip under every one.
AnimatedMain Steam Pipe Run with Valves (Nuclear Power Station and Control Room)
The pipe gallery bay with two flanged gate valves in it, each with a side-mounted stem and a spoked handwheel that turns, for breaking a run where it needs isolating.
Steam Drum Vessel (Nuclear Power Station and Control Room)
A 2.1 m diameter vertical steam drum 4.4 m tall: a dished top and bottom, lagging straps, a bolted manway on the flank, two flanged crown nozzles, a gauge glass, and an access platform with handrail and ladder.
Main Steam Pipe Run (Nuclear Power Station and Control Room)
A 4 m bay of pipe gallery standing on its own floor stands: a 680 mm lagged main at 2.2 m with a smaller feed line and a copper service line beside it, saddle clamped at each stand. End ports run the gallery across a plant floor.
Shell and Tube Heat Exchanger (Nuclear Power Station and Control Room)
A 4.2 m shell and tube heat exchanger on two concrete saddles: a 1.24 m shell with dished and flanged heads, four flanged nozzles top and bottom, a vent standpipe and a blank rating plate.
AnimatedFeedwater Pump Set (Nuclear Power Station and Control Room)
Two horizontal feed pumps on a shared concrete plinth: each a motor with a guarded coupling driving a volute casing, with a flanged discharge riser, a suction bend and a side-mounted isolating handwheel.
AnimatedTurbine Shaft Line (Nuclear Power Station and Control Room)
A 5.2 m length of shaft line between two bearing pedestals: a 400 mm shaft with coupling flanges at both ends, a barring gear wheel, oil pipework with sight glasses, and the turning gear drive standing beside it.
Condenser (Nuclear Power Station and Control Room)
A 6 m surface condenser: a welded shell on a hotwell, a bolted water box at each end with a flanged circulating water branch, the exhaust neck and its expansion bellows on top, and the air offtake off one corner.
Turbo Generator Set (Nuclear Power Station and Control Room)
A 7 m turbo generator on its plinth: a ribbed stator body with end shields, a terminal box with three bushings, a cooler run down the back, an exciter on the outboard end, and a grating walkway with handrail down the operating side.
Turbine Casing (Nuclear Power Station and Control Room)
A 6.4 m horizontally split turbine casing on its concrete plinth: a tapered barrel with a bolted joint flange down each side, three steam belts, two extraction branches with flanges, and a bearing housing at each end.