Loading scene
Walkable demo
Nightclub and DJ Booth
Walk a club room: a lit dance floor under a truss rig, the DJ booth on its riser against an LED backdrop, speaker stacks, a stocked bar run and raised seating booths.
About
A club main room built from the pack's nine ported systems: club floor, LED dance tiles, video panels, risers, booth facade, truss bays with corners and junctions, bar runs, wall modules and acoustic runs.
What is placed. A dance floor of LED and plain tiles with the DJ booth on its riser at one end, the desk carrying turntables, mixer, CDJs, laptop stand, monitor wedge, headphones and a record crate behind a facade panel, against a backdrop of video panel modules. Speaker stacks flank it with hanging speakers above. A truss rig overhead carries moving heads, strobes, UV bars, lasers and the mirror ball. A bar run of counter modules goes down one side with the back bar stocked, optics, taps, ice well, cocktail station, glass washer and stools, raised seating booths with tables line the other, and the entrance has its cloakroom, rope barriers, podium and queue barriers.
What moves. The turntable platters and the mirror ball spin, the moving heads pan and tilt, the entrance door opens and closes, the glass washer hood lifts up its rails, the cocktail station drawer pulls out and the cleaning trolley rolls.
What does not move, and why. Cables, smoke, the light beams themselves and the rope on the barrier posts are static geometry: none is reachable with the rigid node transforms this library uses. There is no crowd and no DJ, because nothing here is skinned. The look is carried by material contrast rather than emissive faces, so every piece reads under ordinary light as well as club light.
Every piece here is a published model from the pack, placed by hand. Walk with the keys or touch, and approach a piece to see it move if it has animation. Colliders, navigation and gameplay are yours to add.
Points of interest
The booth
Turntables, mixer, CDJs, laptop stand, monitor wedge and headphones on the desk, behind a facade panel on a riser. The platters spin.
DJ Booth Desk (Nightclub and DJ Booth)LED backdrop
Video panel modules repeat into a backdrop wall on their ports, in two colourways. They are coloured faces, not emissive: the pack is built to read under ordinary light as well as club light.
Backdrop LED Panel Module (Nightclub and DJ Booth)The rig
Truss bays, corners and junctions overhead carrying moving heads that pan and tilt, strobes, UV bars and the mirror ball on its motor, which spins. The beams and the smoke are not modelled.
Lighting Truss, Straight Bay (Nightclub and DJ Booth)Sound
Mid and sub cabinets stacked at the floor edges with hanging speakers on fly frames above them. Cones and cables are static geometry.
Speaker Stack Sub Cabinet (Nightclub and DJ Booth)The bar
Counter modules repeat into a bar run with the back bar stocked, optics, taps, the ice well, the cocktail station, the glass washer and stools along it.
Bar Counter Module (Nightclub and DJ Booth)Booths and door
Raised seating booths with tables along one side, and the entrance with its cloakroom, rope barriers and podium. The entrance door opens.
Raised Seating Booth with Table (Nightclub and DJ Booth)
Use with an AI agent
Copy this prompt into your AI chat to rebuild the layout, then describe what to change.
Rebuild the "Nightclub and DJ Booth" demo scene from the Nightclub and DJ Booth pack in my project. Layout (JSON, every placement with its CDN URL): https://3dassets.dev/api/v1/demos/nightclub-and-dj-booth Pack manifest: https://3dassets.dev/api/v1/packs/nightclub-and-dj-booth Demo page: https://3dassets.dev/demos/nightclub-and-dj-booth - 145 placements of 55 models; units are metres, +Y up, rotation is yaw in degrees about +Y - Spawn at (0.1, 0.05, 4.2) facing -179.3 degrees; eye height 1.6 m - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader, one load per distinct model, cloned per placement; no decoders required
Also available as JSON or Markdown, and via the MCP server.
Common questions
How do I use Nightclub and DJ Booth with my AI development tools?
How do I get started?
Which game engines and tools can I use Nightclub and DJ Booth with?
How do I import this scene into Unity, Godot, Unreal or Blender?
Can I use Nightclub and DJ Booth in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Is the demo itself a file I can download?
Can I change the scene, or add gameplay to it?
Models in this demo
Club Floor Tile (Nightclub and DJ Booth)
A 2 m square club floor tile 80 mm deep: a dark tray with a poured grey resin face divided by brushed aluminium strips, ported on all four edges so a whole room is laid from repeats of one model.
LED Dance Floor Tile (Nightclub and DJ Booth)
A 1 m LED dance floor tile 80 mm deep: a dark tray with a magenta diffuser face set into a brushed aluminium frame, ported on all four edges so tiles lay out into a floor of any size.
LED Dance Floor Tile, Cyan (Nightclub and DJ Booth)
The 1 m LED dance floor tile with a cyan diffuser face, for laying a chequered floor that reads as a pattern rather than one flat colour.
LED Dance Floor Tile, White (Nightclub and DJ Booth)
The 1 m LED dance floor tile with a white diffuser face, the third colour in a three way chequer and the one a floor reads as when the pattern is off.
Riser Platform Module (Nightclub and DJ Booth)
A 2 by 1 m stage riser at 400 mm: a dark non slip deck in an aluminium edge trim on a folding steel frame with levelling feet, ported on all four edges so risers tile into a booth stage of any size.
DJ Booth Facade Panel (Nightclub and DJ Booth)
A 1.5 m facade section for the front of a booth or a riser: a framed dark panel with a recessed magenta light box behind a diffuser, aluminium rails top and bottom and stiles at both ends so sections butt into a continuous front.
DJ Booth Desk (Nightclub and DJ Booth)
A 1.9 m DJ desk: a pale laminate top at 1 m on dark steel cheeks, a brushed nosing along the working edge, a dropped shelf below for the laptop and a record crate, and a cable trough with its lid along the back.
AnimatedTurntable Deck (Nightclub and DJ Booth)
A direct drive turntable: a 450 mm plinth with a cast aluminium platter on a magenta slipmat, the spindle, a counterweighted S arm with its headshell and cartridge, and the pitch fader plate beside it.
DJ Mixer (Nightclub and DJ Booth)
A four channel club mixer: a raked control surface with the channel faders and a crossfader in pale caps, a bank of gain and EQ knobs, the printed channel strip and rack ears on both cheeks.
DJ Headphones on the Desk (Nightclub and DJ Booth)
A pair of closed back DJ headphones lying on the desk: a padded metal headband with the pale top pad, swivel forks and two earcups with magenta ear pads facing in.
CDJ Media Player (Nightclub and DJ Booth)
A club media player: a 320 mm deck with a dished metal jog wheel under a pale rim, a raked waveform screen, cue and loop buttons in cyan and the tempo fader down the right hand side.
Laptop on a DJ Stand (Nightclub and DJ Booth)
A laptop open on a folding X frame stand: a pale bodied machine with its keyboard deck and a lit screen, raised 250 mm above the desk so it clears the mixer.
DJ Booth Monitor Wedge (Nightclub and DJ Booth)
A booth monitor: a 400 mm wedge on rubber runners with a perforated grille over the coaxial driver and a pale band along the baffle, aimed up at the DJ from the end of the desk.
Record Crate (Nightclub and DJ Booth)
A 360 mm wooden record crate packed with fourteen 12 inch sleeves in pale, magenta, cyan, amber and grey, leaning back the way a browsed crate does, with cut handholes in both ends.
AnimatedMoving Head Light (Nightclub and DJ Booth)
A moving head spot: a base with a display panel and hook clamp rails, a yoke that pans on it and a head that tilts in the yoke behind a cyan tinted lens. About 750 mm tall at level.
Backdrop LED Panel Module (Nightclub and DJ Booth)
A 1 m square LED video panel for the wall behind the booth: a cast frame 100 mm deep with a magenta diffuser face ribbed on the pixel pitch, and corner castings on all four edges so panels tile across and up.
Backdrop LED Panel Module, Cyan (Nightclub and DJ Booth)
The 1 m backdrop LED panel with a cyan diffuser face, for chequering a video wall two ways so the backdrop reads as a pattern rather than a flat sheet.
Speaker Stack Sub Cabinet (Nightclub and DJ Booth)
A double 18 inch club subwoofer: a 1.15 m birch enclosure on skid runners with two tuned ports through the baffle, a grille over the mouth, a pale band along the bottom of the baffle and a recessed connector plate on the back.
Speaker Stack Mid Cabinet (Nightclub and DJ Booth)
A two way top box for the head of a stack: a 700 mm trapezoidal enclosure with a horn flare over the compression driver behind the grille, pale banding on the baffle and handles on both cheeks.
Laser Effect Unit (Nightclub and DJ Booth)
A housed laser effect: a cast aluminium box with the aperture window and a fan of five emitter lenses behind it, an interlock key panel, a yoke on both cheeks and a rubber base plate.
Strobe Bar (Nightclub and DJ Booth)
A 1.1 m four cell strobe bar: four lamp windows behind pale diffusers in a dark extrusion, with a yoke and hook clamp on top for clamping to a truss chord.
UV Blacklight Bar (Nightclub and DJ Booth)
A 1.1 m ultraviolet wash bar: a single long tube in a dark reflector housing with end caps, on a yoke and hook clamp. Modelled in the deep magenta a UV tube actually reads as.
Smoke Machine (Nightclub and DJ Booth)
A club smoke machine: a dark cased hazer on four fixed wheels with a real flared nozzle on the front, a control panel with its ready lamp, side handles and a pale fluid bottle stood on the case.
Lighting Truss, Corner Block (Nightclub and DJ Booth)
A 90 degree corner block for the truss grid: a 300 mm cube with a half metre arm on the -X side and another on the -Z side, spigot plates on both, so a rectangular grid closes at every corner.
Ceiling Truss Grid Module (Nightclub and DJ Booth)
The junction block a ceiling truss grid is built from: a 300 mm cube with half metre arms on all four sides and spigot plates on every one, so straight bays run out of it in both directions and a grid closes on a 3 m pitch.
Lighting Truss, Straight Bay (Nightclub and DJ Booth)
A 2 m bay of 300 mm square box truss: four chords with a zigzag brace on every face, spigot plates and cone spigots at both ends and a magenta bay label under each plate.
Hanging Speaker on a Fly Frame (Nightclub and DJ Booth)
The mid cabinet in a fly frame: the box slung between two steel straps under a bumper bar with shackles at both pick points, for flying delay boxes off the truss over the floor.
AnimatedDisco Ball on a Motor (Nightclub and DJ Booth)
A 520 mm mirror ball hung under its rotator: the faceted ball on a capped spindle, a drop rod and a dark motor box with its indicator and a shackle on top for the truss clamp.
Light Bar on a Stand (Nightclub and DJ Booth)
A four head par bar on a wind up tripod stand: a 1.3 m T bar at 1.6 m carrying four cans angled down at the floor, each with a coloured gel frame in magenta, cyan, amber and pale.
Bar Counter Module (Nightclub and DJ Booth)
A 1.5 m bar counter module: a panelled timber front with a brass foot rail, a stainless working deck at 900 mm and an inner shelf, under a pale stone top at 1.1 m that overhangs 100 mm toward the customer. Ports on both ends build a bar run of any length.
Bar Counter Corner (Nightclub and DJ Booth)
A square corner piece for the counter run: one 650 mm bay with the same panelled front, foot rail and stone top, ported on its -X end and its -Z end so a bar turns through 90 degrees without a gap.
Back Bar Shelving Unit (Nightclub and DJ Booth)
A 1.5 m lit back bar bay stocked with twenty eight bottles: a timber base cupboard with a pale top, four glass shelves on dark stiles, a magenta light box behind the bottles and a cornice over the lot. 2.15 m tall.
Optics Rail with Measures (Nightclub and DJ Booth)
A six bottle optics rail: a wall bracket carrying six spirit bottles inverted in their collars, each with its measure chamber and push lever underneath. Amber label bands break the glass up.
Four Tap Beer Font (Nightclub and DJ Booth)
A four tap keg font on the bar top: a chrome column and cross bar on a plinth, four taps with their spouts and magenta pull handles, standing in a stainless drip tray.
Bar Till Screen (Nightclub and DJ Booth)
A till terminal for the bar top: a raked touch screen with a pale key overlay on a weighted pedestal arm, 420 mm tall, with the card reader plate beside the foot.
Overhead Glass Rack (Nightclub and DJ Booth)
A 1.2 m hanging stemware rack: a channel frame on four drop rods with fifteen stemmed glasses hung upside down by their feet, and mounting plates on top.
AnimatedUnder Bar Glass Washer (Nightclub and DJ Booth)
An under counter glass washer: a stainless cabinet on adjustable feet with a rack of nine glasses inside, a cyan control panel on the front and a hood that rises straight up off the wash chamber.
AnimatedCocktail Station (Nightclub and DJ Booth)
A 900 mm cocktail station: a stainless unit with a pale worktop laid up with a shaker, a jigger, a strainer, three garnish pots of citrus and a muddler, over a tool drawer on runners.
Ice Well with Speed Rail (Nightclub and DJ Booth)
A stainless ice well: a 500 mm under counter unit with a bed of ice below the rim, six mixer bottles standing in it, a scoop hooked on the end and a speed rail hung on the customer side.
Bottle Crate (Nightclub and DJ Booth)
A magenta plastic bottle crate packed with twelve bottles: pierced walls with moulded handholds, a ribbed base and green glass with gold caps standing proud of the rim.
Bar Stool (Nightclub and DJ Booth)
A 760 mm bar stool: a weighted pedestal base with a brushed foot ring, a crowned velvet seat pad on a dark rim and a low chrome back rest.
Raised Seating Booth with Table (Nightclub and DJ Booth)
A raised club booth: a 2.4 by 1.5 m platform with a brass step nosing, a horseshoe banquette in deep red velvet on timber bases with a capping rail, and a pale topped pedestal table laid with an ice bucket and two glasses.
Raised Seating Booth, Teal (Nightclub and DJ Booth)
The raised club booth upholstered in teal instead of red, for alternating booths down a wall so a row of them does not read as one repeated object.
Mirror Wall Panel Module (Nightclub and DJ Booth)
A 1.2 by 2.6 m mirrored wall module: a full height mirror pane in a dark frame with aluminium stiles, magenta reveal strips top and bottom and a recessed kick, ported on both stiles so panels run into a continuous wall.
AnimatedEntrance Door Module (Nightclub and DJ Booth)
A 1.2 by 2.6 m wall module with the club entrance in it: a timber leaf 960 mm wide in a brushed metal lining with a mirrored vision panel and a full height pull bar, on the same wall ports as the mirror panel so a door drops into any run.
Fire Exit Sign (Nightclub and DJ Booth)
A 340 mm square fire exit sign: the same backing plate with a lit cyan face and a pale running figure and arrow, for the exit route out of the dance floor.
Toilet Door Sign (Nightclub and DJ Booth)
A 340 mm square toilet door sign: a dark backing plate with a pale face and a raised magenta pictogram of two figures, for the doors off the club corridor.
Wall Air Vent (Nightclub and DJ Booth)
A 600 by 400 mm extract vent: a pressed grille with seven raked blades in a brushed frame, for the wall above the bar or beside the toilets where a club has to move its air.
Cloakroom Counter with Rails (Nightclub and DJ Booth)
A cloakroom position: a 1.8 m timber counter with a pale stone top, a magenta light panel on the customer face and a numbered ticket block, backed by a hanging rail on two stands carrying nine empty hangers.
Door Host Podium (Nightclub and DJ Booth)
A door host podium: a 700 mm raked lectern in dark laminate with a pale top, a brass pen ledge, the guest list lying on it, a gooseneck reading lamp and a magenta light strip across the kick.
Rope Barrier Post with Rope (Nightclub and DJ Booth)
A chrome rope barrier post with its rope: a weighted base, a 980 mm column with a ball top and eyes on both sides, and a 1.6 m red velvet rope hanging in a real catenary with brass end hooks to the next post along +X.
Queue Barrier Post with Belt (Nightclub and DJ Booth)
A retractable belt barrier post: a weighted base, a 980 mm column with the cassette head and a 2 m magenta webbing belt pulled out to its clip, for the queue outside the door and the line to the cloakroom.
Acoustic Wall Panel (Nightclub and DJ Booth)
A 1.2 by 0.9 m acoustic wall panel: a velvet faced absorber in a dark frame with brushed stiles and nine magenta flutes across the face, ported on both stiles so panels run along a wall without a gap.
Club Waste Bin (Nightclub and DJ Booth)
A 780 mm round waste bin: a grey body with a brushed rim ring, a dark drop-in top and a magenta liner pulled over the rim.
AnimatedCleaning Trolley (Nightclub and DJ Booth)
A housekeeping trolley: a wheeled frame with a magenta mop bucket and wringer, a bottle shelf with two spray bottles, a bag hoop with its sack in it and a mop stood in the corner.