Free models · Game-ready GLB
Modular
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
2,251 free GLB models
Banquette run 1400, leather (Bar, Pub and Brewery Taproom)
The 1.4 m banquette module finished in dark leather rather than woven upholstery.
Banquette corner (Bar, Pub and Brewery Taproom)
The banquette corner: a 580 mm square seat box with a piped pad and two fluted back pads meeting on a turned corner pilaster, at the same seat and back heights as the run.
Banquette run 1400 (Bar, Pub and Brewery Taproom)
A 1.4 m banquette module: a panelled base with a piped seat pad, a fluted upright back pad and a moulded capping rail. Butt-joints against the next module along X.
Back bar glass shelf run (Bar, Pub and Brewery Taproom)
A back bar bay of five toughened glass shelves on brass pin brackets against a mirrored back, each with a slim brass light strip beneath it.
AnimatedBack bar bottle fridge bay (Bar, Pub and Brewery Taproom)
A back bar bay with a glazed bottle fridge in the base: two glass doors on barrel hinges with bar handles over three wire shelves, a louvred grille, and two display shelves with gallery rails and a blank lit sign band above.
Back bar spirit shelf run (Bar, Pub and Brewery Taproom)
An open back bar bay: four deep timber spirit shelves on shaped brackets against a boarded back, each with a brass gallery rail, over the panelled base and under the moulded cornice.
AnimatedBack bar mirrored bay (Bar, Pub and Brewery Taproom)
A back bar bay built around a tall framed mirror: a panelled base cabinet with fielded doors, a bullnose worktop, a moulded mirror frame, a single display shelf with a brass gallery rail and a moulded cornice above.
AnimatedBack bar bottle steps bay (Bar, Pub and Brewery Taproom)
A full height back bar bay of bottle steps: a panelled base cabinet with fielded doors and brass knobs, a bullnose worktop, four stepped display tiers with moulded nosings and brass gallery rails against a mirrored back, framed by turned pilasters under a moulded cornice.
Two tier cask stillage (Bar, Pub and Brewery Taproom)
The cask stillage in a two tier configuration: a second cradle deck 420 mm above the first on continued uprights, for stacking casks in a working cellar.
Cask stillage frame (Bar, Pub and Brewery Taproom)
A 1.2 m steel cask stillage: two cradle rails on box-section legs with diagonal braces, four vee chocks that hold a cask level, and rubber floor pads.
Bar top section with bullnose (Bar, Pub and Brewery Taproom)
A loose 1.2 m bar top section: a postformed slab with a full bullnose nosing bead along the customer edge, a brass edge strip and the bearer rails on its underside.
AnimatedBar counter end with lift flap (Bar, Pub and Brewery Taproom)
The service end of a bar counter: a panelled half with a fixed bar top, a turned newel post and a hinged bar-top leaf over an open passage with a slatted swing gate below.
Bar counter corner (Bar, Pub and Brewery Taproom)
A 90 degree bar counter corner on the same grid: two fielded panel faces meeting on a turned pilaster, a mitred bar top with brass nosing on both edges and a foot rail turning the corner.
AnimatedBar counter till position (Bar, Pub and Brewery Taproom)
A counter module built as the till position: a stainless plinth carrying a tilted touch terminal and a card reader, a docket spike and a cash drawer under the bar top.
Bar waiter station module (Bar, Pub and Brewery Taproom)
A counter module set up as the waiter station: a stainless tray shelf inside the bar, a docket rail on posts with blank order slips, a stack of round drinks trays and a divided condiment box.
Bar counter module 1200 (Bar, Pub and Brewery Taproom)
A 1.2 m pub bar counter module: recessed plinth, fielded timber front panelling under a moulded rail, a postformed bar top with a bullnose nosing and brass edge strip, a brass foot rail on stanchions and a stainless working deck with an upstand inside the bar.
Bar counter end with the flap raised (Bar, Pub and Brewery Taproom)
The bar counter end module with its hinged top leaf swung up on the newel post and the gate opened, showing the service passage in use.
Bar front panelling section (Bar, Pub and Brewery Taproom)
A 1.2 m loose section of bar front panelling: a dark skirting plinth, three bevelled fielded panels in a rail and stile frame, corner stiles and a moulded capping rail.
Bar service hatch module (Bar, Pub and Brewery Taproom)
A counter module closed off with a snug service hatch: turned posts carrying an arched voussoir head, a shelf across the opening and a slatted roller shutter drawn down behind it.
Arena Stand Block (Martial Arts Dojo and Fight Stages)
Seven-row raked stand block with seventy seats.
Roof Beams (Martial Arts Dojo and Fight Stages)
Exposed timber roof beam bay with five purlins.
Dojo Sliding Door (Martial Arts Dojo and Fight Stages)
Paired paper-panel sliding doors in a timber wall bay.
Shrine Alcove (Martial Arts Dojo and Fight Stages)
Recessed shrine alcove with an offering bowl and two candles.
Mirror Wall (Martial Arts Dojo and Fight Stages)
Full-height mirrored wall bay with a barre rail.