Loading model
About
The bar counter end module with its hinged top leaf swung up on the newel post and the gate opened, showing the service passage in use. Overall 0.88 by 1.58 by 0.87 m (X by Y by Z). Metre units, +Y up, the side a person uses toward +Z, resting on y=0. Same named lift-flap and bar-gate nodes and pivots as the closed module. Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Bar counter end with the flap raised (Bar, Pub and Brewery Taproom)” asset in my project. Model: https://cdn.3dassets.dev/assets/18318/v1/model.glb Asset page: https://3dassets.dev/assets/bar-pub-and-brewery-taproom-bar-counter-end-flap-raise-b749e839 Description: The bar counter end module with its hinged top leaf swung up on the newel post and the gate opened, showing the service passage in use. - Dimensions (X × Y × Z): 0.88 × 1.58 × 0.865 metres - Triangles: 2.3k - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/18318/v1/model.glb', (gltf) => {
scene.add(gltf.scene)
})Common questions
How do I use this model with my AI development tools?
How do I get started?
Which game engines and tools can I use this model with?
How do I import this model into Unity, Godot, Unreal or Blender?
Can I use this model in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Do I need Draco, Meshopt or KTX2 to load it?
Bar counter end with the flap raised (Bar, Pub and Brewery Taproom)
The bar counter end module with its hinged top leaf swung up on the newel post and the gate opened, showing the service passage in use.
More in Props & Furniture
Full size open net soccer goal (Football Soccer Stadium and Club Grounds)
Goal with 7.32 m clear width, 2.44 m clear height, 2 m deep open cord net and tubular frame.
Swim Zone Buoy Orange (Beach Surf and Paddle Kit)
Sun yellow variant of the swim zone marker buoy with a coral cross topmark.
Dune Grass Tuft (Beach Surf and Paddle Kit)
Marram dune grass tuft: 26 tapered curling blades and four seed heads rising from a low sand mound.
Stocked Surfboard Rack (Beach Surf and Paddle Kit)
The freestanding surfboard rack stocked for hire: shortboard, fish, soft top learner and longboard standing tail down in the four slots.
Warning Flag Pole (Beach Surf and Paddle Kit)
3.1 m warning flag pole: the patrol pole with a solid coral no swimming flag and coral finial.
Dune Fence Run (Beach Surf and Paddle Kit)
2.6 m dune wind fence: three round timber posts, twin twisted wire lines at three heights and weathered grey slats set at slightly uneven heights.
Beach Umbrella (Beach Surf and Paddle Kit)
2.4 m beach umbrella: sand anchor with base plate, steel lower pole with tilt collar and knob, timber upper pole, runner and stretchers, eight steel ribs under alternating coral and foam panels with a scalloped valance, vent cap and finial.
Surf Wax Kit (Beach Surf and Paddle Kit)
Surf wax kit lying on the sand: sun yellow wax puck in a paper wrapper, a coral base coat bar and a toothed teal wax comb.
Folding Beach Chair (Beach Surf and Paddle Kit)
Low folding beach chair: steel tube frame with feet, timber armrests and a striped coral and foam sling seat that sags into the back.
Driftwood Log (Beach Surf and Paddle Kit)
2.8 m weathered driftwood log: twisted tapering trunk, two branch stubs, a splayed root end and one sawn end showing the grain.
Lifeguard Megaphone (Beach Surf and Paddle Kit)
Handheld lifeguard megaphone resting on its grip: coral flared bell with grille, battery housing, pistol grip and trigger, siren switch and carry strap.
Visitor Tasting Counter (Distillery and Bonded Warehouse)
Visitor tasting counter 2.8 x 1.1 m and 1.8 m to the back shelf: a cask staved oak front with iron bands, a plank top, six nosing glasses on a tray, a water jug, two unlabelled bottles and seven more glasses upended on the shelf behind. Nothing carries a label.
Similar assets
AnimatedBar counter end with lift flap (Bar, Pub and Brewery Taproom)
The service end of a bar counter: a panelled half with a fixed bar top, a turned newel post and a hinged bar-top leaf over an open passage with a slatted swing gate below.
AnimatedFront counter flap module, flap raised (Fast Food Counter and Drive-Thru)
The counter flap module with the worktop flap swung up on its rear hinge, showing the crew crossing open.
Bar counter module 1200 (Bar, Pub and Brewery Taproom)
A 1.2 m pub bar counter module: recessed plinth, fielded timber front panelling under a moulded rail, a postformed bar top with a bullnose nosing and brass edge strip, a brass foot rail on stanchions and a stainless working deck with an upstand inside the bar.
Bar counter module (Restaurant Kitchen and Dining Room)
A 600 mm dining bar counter module on the counter-run grid: a panelled timber front with a brass foot rail, a stainless working counter with a drip tray and a raised postformed bar top.
AnimatedFront counter flap module (Fast Food Counter and Drive-Thru)
A 600 mm counter module with a lift-up worktop flap and a half-height swing gate below it, so crew can cross the counter line.
Bar Counter Module (Nightclub and DJ Booth)
A 1.5 m bar counter module: a panelled timber front with a brass foot rail, a stainless working deck at 900 mm and an inner shelf, under a pale stone top at 1.1 m that overhangs 100 mm toward the customer. Ports on both ends build a bar run of any length.
Front counter module 600 (Fast Food Counter and Drive-Thru)
A 600 mm front counter module on the 900 mm counter grid: laminate customer fascia with an accent reveal, recessed kick, stainless bullnose top with a rear upstand, crew-side wire shelf and a bag rail on the top.
Working bar with back bar and dispense (Bar, Pub and Brewery Taproom)
A pub bar in service: a panelled counter run from the lift-flap end through the till and waiter positions and around a corner into a return leg, a four bay back bar of bottle steps, mirror and glazed fridge with an optic rail and lightbox, three tap fonts and a set of three...
Condiment bar module (Cafe, Bakery and Coffee Bar)
A 600 mm condiment bar on the counter-run grid: a counter module with a recessed waste aperture and flap ring, a timber caddy tray with two glass sugar jars, and a napkin dispenser on the customer side.
Servery counter end module (Office Lobby and Building Facilities)
A 600 mm servery counter end module closing a run, with a stainless return panel and a rounded corner post on the open end.
Front counter end cap (Fast Food Counter and Drive-Thru)
A 300 mm counter end cap that closes a run with a wrapped return panel and a stainless top that overhangs the exposed end.
Bar waiter station module (Bar, Pub and Brewery Taproom)
A counter module set up as the waiter station: a stainless tray shelf inside the bar, a docket rail on posts with blank order slips, a stack of round drinks trays and a divided condiment box.