Free models · Game-ready GLB
Modern
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
14,038 free GLB models
Plant Roof Slab (Nuclear Power Station and Control Room)
A 4 by 4 m roof bay: a 240 mm slab on two downstand beams and a cross beam, with a kerbed rooflight in the middle. End ports run it across an annex.
AnimatedBlast Door (Nuclear Power Station and Control Room)
A shielded blast door in a rebated steel frame: a 200 mm leaf on three knuckle hinges with a five spoke dogging wheel, four locking lugs down each stile and a trefoil badge at head height. It fits the doorway in the wall panel.
Plant Wall Panel with Doorway (Nuclear Power Station and Control Room)
The wall panel with a 1.3 by 2.3 m doorway cast through it and a steel jamb lining set into the reveal, sized for the blast door and the airlock pair in this pack.
AnimatedAirlock Door Pair (Nuclear Power Station and Control Room)
A personnel airlock: two glazed steel leaves 1.1 m apart in their own jamb frames, hung on opposite stiles with grab rails and vision panels, under a galvanised ceiling panel with an interlock lamp on it.
AnimatedPlant Floor Slab with Hatch (Nuclear Power Station and Control Room)
The floor bay built as a kerbed frame round a 1.2 m service opening, closed by a lift-off galvanised grating cover on a steel angle kerb.
Plant Floor Slab, Hazard Marked (Nuclear Power Station and Control Room)
The floor bay with a painted chevron keep-clear marking standing 4 mm proud of the slab, for the ground under a crane hook or in front of a switchgear cubicle.
Plant Floor Slab (Nuclear Power Station and Control Room)
A 4 by 4 m cast floor bay 300 mm thick with chamfered edges and a recessed lifting socket at each corner. Four ports on the bay edges tile it out into a plant floor of any size.
Plant Wall Panel (Nuclear Power Station and Control Room)
A 4 by 4 m precast wall panel 300 mm thick with a stiffening rib at each end and a painted band at waist height. End ports run it into a continuous wall.
Hillside Estate and Open Cellar (Vineyard and Winery)
A 40 x 32 m working wine estate. Six trellised rows run across cultivated soil west of the drive, bare at the near end, in full leaf in the middle and hanging with fruit at the far end, closed at both ends by raked end posts on their anchors and held by a terrace wall along...
Stone Wall Section (Vineyard and Winery)
Four metre stone wall bay 2.96 m tall and 420 mm thick, faced in rough coursed rubble on both sides with a stepped coping over it. Butts end to end and into the corner pillar.
Tile Roof Section (Vineyard and Winery)
Four metre pantiled roof module spanning 5 m: a ridge beam, a rafter plate each side, fifty four half round pantile runs down the slopes and a ridge run over the top, with the eaves overhanging front and back. Lays end to end along a ridge.
Stone Floor Tile (Vineyard and Winery)
Two metre flagstone floor module: six flags of four sizes bedded in grit, each laid a little proud of the bed so the joints read. Tiles edge to edge across a courtyard or a cellar floor.
Stone Corner Pillar (Vineyard and Winery)
Square stone corner pillar 620 mm on plan and 3.5 m tall with proud facing stones on all four sides, a projecting cap and a pyramid top. Takes the ends of two wall bays meeting at a corner.
AnimatedStone Arch Gateway (Vineyard and Winery)
Stone gateway 4.8 m wide with a 3.2 m semicircular arch on two faced piers, capped and coped, hung with a pair of boarded oak gates on strap hinges that swing open into the courtyard.
AnimatedYard Gate (Vineyard and Winery)
Three metre five bar timber field gate on two turned posts with pointed caps: five horizontal bars, two heels, a diagonal brace, strap hinges and a drop latch. The leaf swings on its hanging post.
AnimatedFarmhouse Front (Vineyard and Winery)
Seven metre rendered stone farmhouse front, 5.2 m to the eaves: a lintelled doorway with a boarded oak door, four windows with stone surrounds, glazing bars and painted shutters that fold back, a corbelled eaves course and rubble facing across the whole wall.
Tasting Stool (Vineyard and Winery)
Round topped timber stool 765 mm tall on four splayed legs with two stretcher pairs, a dished seat and metal foot cups. Pulls up to the tasting counter.
Chalkboard (Vineyard and Winery)
Framed chalkboard 1.2 m wide on a folding easel leg, carrying abstract chalk marks only: three bars, two ticks and a ring, with a chalk resting on its ledge. Deliberately wordless, so it names nothing.
Tasting Glasses (Vineyard and Winery)
Oak tray 460 x 320 mm carrying six tasting glasses, each with a foot, a drawn stem and a tapered bowl; three of them hold a static pour. Sits on the tasting counter.
Spittoon (Vineyard and Winery)
Floor standing tasting spittoon 1.05 m tall: a weighted base, a column and a stainless funnel bowl with a rolled rim over a collecting body. The contents are static geometry.
Tasting Counter (Vineyard and Winery)
Three metre tasting counter: a coursed stone base with proud face stones, a thick oak top overhanging front and back on a shadow rail, three open bottles standing on it and a serving board at one end.
AnimatedRiddling Rack (Vineyard and Winery)
Timber riddling rack 1.4 m wide: an A frame of two leaning boards with sixty four bottle holes, unlabelled bottles set neck down in them, on four braced legs, so the whole frame tilts about its ridge.
Wine Rack (Vineyard and Winery)
Timber wine rack 1.2 x 1.8 m with eight shelves and dividers, holding about forty five unlabelled bottles lying neck out with gaps where bottles have been taken. Stands against a cellar wall.
AnimatedLabelling Head (Vineyard and Winery)
Bench labelling head 1.6 m tall with two reels of blank label stock on their spindles, a web running down over a guide plate, a press roller and a bottle in the cradle. The reels turn; the label web is static and carries no printing.