Free models · Game-ready GLB
Buildings
Every building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
3,029 free GLB models
AnimatedSite office cabin (Shipyard and Dry Dock)
A 6 m portable site office on a steel chassis: profiled cladding, two double glazed windows, a hinged half glazed door with a railed step, a blank name board and a roof with a gutter. The door opens.
AnimatedMess and drying room cabin (Shipyard and Dry Dock)
The same 6 m cabin fitted out as a mess room: one long window band over the tables, a closed serving hatch with a shelf under it, a blank notice board and the same hinged door with its railed step.
AnimatedFabrication shed door bay (Shipyard and Dry Dock)
The gable end of an 8 m span shed with a 5 m by 4 m insulated roller shutter in its own frame, a wicket beside it and a blank sign panel over the opening. The shutter rolls up into its hood.
Shed roof section, 4 m (Shipyard and Dry Dock)
A 4 m pitched roof cassette for an 8 m span shed: profiled steel sheeting on purlins with a ridge cap, a translucent rooflight strip in each slope and a gutter along both eaves.
Scaffold run section, 4 m (Shipyard and Dry Dock)
Tube and fitting scaffold bay 4 m long, 0.9 m wide and 2 m to the working deck: standards, ledgers, transoms, scaffold boards, a double guardrail and a toe board. Ports at both ends so a run follows a hull for any length.
Fabrication shed bay, 4 m (Shipyard and Dry Dock)
A 4 m slice of an 8 m span fabrication shed: a portal frame in shop primer, profiled cladding to both sides, crane rail corbels at 5.2 m and a clear open end. Ports at both ends so a shed runs to any length.
Mobile staging tower, 6 m (Shipyard and Dry Dock)
Braced access tower 6 m to the top deck on locking castors: three boarded lifts, ladder access through trap hatches, guardrails and toe boards all round, for working a hull side down in a dock.
Yard boundary wall panel, 4 m (Shipyard and Dry Dock)
Precast site boundary panel 4 m long and 2.4 m tall in a galvanised post channel, with a blue banded top rail and a blank sign plate for a yard to letter itself. Ports at both ends so a boundary runs to any length.
Tepidarium Hypocaust Cutaway Floor (Roman Bathhouse and Palaestra)
A 4 m square tepidarium floor shown as a cutaway section: fired clay pilae stacks in a 660 mm grid under a suspended deck of tiles, mortar screed and mosaic, with one quarter of the deck and its pilae removed so the 790 mm heating void underneath is open to view.
AnimatedPraefurnium Furnace Mouth (Roman Bathhouse and Palaestra)
A praefurnium furnace mouth 2.6 m wide: a brick faced stokehole with a voussoir arch, an iron door on a single hinge, the fire chamber behind it and a raked ash apron in front, under a projecting flue breast.
Wall Flue Tile Run (Roman Bathhouse and Palaestra)
A 1 m run of wall flue tiles 2.6 m tall: two columns of box section tubuli bedded on a mortar backing with a travertine capping, the hollow of each tile read as a recessed panel. Flues line the wall of a heated room and carry the furnace gas up behind the plaster.
Hypocaust Pilae Stack (Roman Bathhouse and Palaestra)
A single hypocaust pilae stack 790 mm tall: a mortar footing, a column of square fired clay bessales laid with a mortar joint between each, and a bedding tile on top. Stacks stand in a grid under a suspended floor so the furnace gas can run between them.
Frigidarium Cold Plunge Basin (Roman Bathhouse and Palaestra)
A cold plunge basin for a frigidarium, 3.5 m by 2.5 m and 1.05 m high: a mortared tank lined in white marble with a red inlaid floor band, a moulded marble rim, three steps down into it at one end and a pair of bronze grab rails over them.
Caldarium Apse Section (Roman Bathhouse and Palaestra)
A semicircular apse section for the end of a hot room, 5.2 m across and 4 m to the springing: a coursed travertine drum 420 mm thick with a moulded cornice, the first three courses of the half dome over it, and a marble bench running round the foot.
Caldarium Hot Pool (Roman Bathhouse and Palaestra)
A hot pool for a caldarium, 4.5 m by 2.9 m and 850 mm high: a marble lined tank with a seat ledge along both long sides, a moulded rim, and a bronze delivery spout on a pedestal at one end.
AnimatedBoundary Wall Gate (Roman Bathhouse and Palaestra)
The same 2 m boundary run as a gateway: two tufa piers with moulded caps and a pair of iron strapped timber leaves hung between them. Same run ports, so it drops into a length of plain wall.
Boundary Wall Run (Roman Bathhouse and Palaestra)
A 2 m run of precinct boundary wall 2.56 m tall: a mortared core faced in four courses of brown tufa ashlar with a travertine coping over it. Runs butt end to end round a palaestra or a service yard.
Dome Section with Oculus (Roman Bathhouse and Palaestra)
A 5.3 m dome on a low drum with an open oculus at the crown: a coffered shell of five rings on a moulded cornice, the eye ringed in marble. It is a section for capping a hot room, and the oculus is a real hole through the shell, so a scene under it is lit rather than sealed.
Groin Vault Section (Roman Bathhouse and Palaestra)
A groin vault bay 4 m by 2 m: two barrel shells crossing at right angles on four corner piers, with marble ribs run along the four groins to the crown. It is a section, not a whole room: repeat it or butt it to a barrel run.
Colonnade Portico Run (Roman Bathhouse and Palaestra)
A 2 m portico run for a palaestra walk: a Tuscan column on a stylobate, the entablature over it, a 5.1 m ashlar back wall and a terracotta tiled lean to roof between the two, 3.2 m deep. Runs repeat along the walk and turn at a corner by butting end to end.
Barrel Vault Section (Roman Bathhouse and Palaestra)
A 2 m deep section of barrel vault over a 4 m span: thirteen radial voussoir rings 380 mm thick on short springing blocks, with a marble impost band along each side. Sections repeat along the vault, and the scene sets them on a wall head at whatever height the walls give.
Arch Section (Roman Bathhouse and Palaestra)
A free standing arch section 4.7 m wide: two ashlar piers with marble impost bands carrying a semicircular ring of thirteen voussoirs and a raised keystone, springing at 2.4 m over a 3.3 m opening. One metre deep, so it reads as a wall thickness rather than a hoop.
Colonnade Bay (Roman Bathhouse and Palaestra)
A 2 m colonnade bay 5 m tall: a stylobate step, one Corinthian column on the bay line and the entablature it carries, with an architrave, an inlaid frieze band and a projecting cornice. Bays repeat along the entablature, so a run of n bays needs one closing column.
Wall Pilaster Half Column (Roman Bathhouse and Palaestra)
A 3.9 m engaged half column for a wall face: a fluted shaft standing out of a flat pilaster back, on a moulded plinth with a Tuscan capital. Set it against a wall module so the back plate beds into the wall face.