Free models · Game-ready GLB
Assets
Every model here is a game-ready GLB that drops into three.js, Blender, Godot, Unity and Unreal, free to use in personal and commercial work without crediting anyone.
Files are binary glTF with embedded WebP textures and quantized geometry, which three.js reads natively and Blender, Godot and Unity import as they are, so nothing needs a Draco or KTX2 decoder. Each asset page carries a permanent CDN URL you can load straight from your code.
22,099 free GLB models
Sonar Console with Waterfall Display (Submarine Interior and Control Room)
A 1.1 m sonar position: a console with a tall waterfall screen over a bearing strip, nine switches and two tuning knobs on the raked desk, and a headset hook on the cheek.
AnimatedNavigation Chart Table (Submarine Interior and Control Room)
The plot: a 1.6 by 0.9 m chart table with a lit tracing top inside a brass fiddle rail, two chart drawers on drawer-1 and drawer-2, a rack of five rolled charts below, a dividers tray and a plotting light on a jointed arm.
AnimatedWatchkeeper's Stool (Submarine Interior and Control Room)
The same pedestal at standing watch height with a shallow back pad instead of a full one, for a plotter or a sonar operator. The seat swivels about Y on the seat node.
AnimatedPlanesman's Seat (Submarine Interior and Control Room)
A bolted pedestal seat for a watchkeeper at the planes: a deck plate, a clamped column with a foot ring, and a padded pan and raked back on arms. The seat swivels about Y on the seat node.
AnimatedBallast Control Panel (Submarine Interior and Control Room)
The trim and blowing position: a 1.5 by 1.85 m panel with a lit mimic board of plain blocks and links, six indicator lamps, four blowing levers in a quadrant, two 300 mm vent handwheels and a bank of four gauges.
AnimatedHelm Station with Control Yokes (Submarine Interior and Control Room)
The driving position: a 1.7 m console with a raked desk, two aircraft style control yokes on canted columns, a bank of eight dials over a row of eight switches, a small order screen, red and amber order lamps and a foot rail.
AnimatedAttack Periscope Stand (Submarine Interior and Control Room)
The attack periscope housed in its well: a 1.3 m stand with a brass bearing ring graduated in 24 divisions, a capped barrel stub, a boxed hoist frame and a hoist handwheel on the wheel-hoist node. Stands on the deck beside the search periscope.
AnimatedSearch Periscope (Submarine Interior and Control Room)
A 3.1 m search periscope through the deck: a gland and well with a brass training ring, a stepped barrel, an eyepiece housing with a rubber brow and a bearing dial, and an optics head with a window band.
AnimatedHigh Pressure Air Manifold (Submarine Interior and Control Room)
A bulkhead mounted air manifold 1.24 m wide: a flanged 150 mm header on a stiffened back plate, four branch valves with 220 mm handwheels, a drain trap and a bank of four pressure dials over them. Each wheel turns about Z on its own wheel-1 to wheel-4 node.
AnimatedPipe Junction with Valve Wheels (Submarine Interior and Control Room)
A junction in a 120 mm sea water main: a globe valve with a 340 mm handwheel on the main, a branch tee dropping to the bilge with its own 240 mm wheel, a pressure dial on a standpipe and two hull brackets. Both wheels turn about Z on the wheel-stop and wheel-branch nodes.
Service Pipe Run (Submarine Interior and Control Room)
A 2 m run of three service pipes on two hull brackets, flanged at both ends and banded for identification: a 120 mm sea water main, an 88 mm air line and a 72 mm hydraulic line. Its pipe-aft and pipe-fore ports carry the run the length of a compartment.
Cable Run and Junction Box (Submarine Interior and Control Room)
A 2 m hung cable tray carrying four bundles, with two hull hangers and a junction box on the outboard face with a bolted blank cover and four glands. The cable is static: a flexible run is not reachable with one rigid node transform, so it is modelled in the position it hangs in.
AnimatedConning Tower Base (Submarine Interior and Control Room)
The bottom 2.4 m of a fin: a faired tower 2.7 m long and 1.5 m across with free flood slots down each flank, step irons up the after side, a bridge coaming, two masthead fairings and an access trunk with a hinged lid on the hatch node.
AnimatedOverhead Hatch and Ladder (Submarine Interior and Control Room)
The climb out of a compartment: a 2.3 m ladder of two stiles and eight rungs from the deck flat to a 1 m trunk coaming at the hull crown, with a grab rail round it and a dished lid hinged on its after edge.
AnimatedWatertight Bulkhead with Dogged Door (Submarine Interior and Control Room)
A watertight bulkhead filling a 3.5 m internal hull: stiffened plating, a bolted blank inspection plate and a 720 by 1520 mm oval doorway with a 200 mm sill, closed by a dogged door. The leaf carries six dogs and its dogging wheel and swings on the door node.
Watertight Bulkhead, Open Doorway (Submarine Interior and Control Room)
The same watertight bulkhead with the door leaf removed, leaving the coamed doorway open. Use it where a compartment has to stay walkable, or as the after face of a bulkhead whose door is modelled on the far side.
Deck Plate Section, Open Grating (Submarine Interior and Control Room)
The same deck plate section decked in open steel grating instead of plate: twenty two bearer bars on seven cross bars, which is what a machinery space or a bilge access run is floored with. Shares the deck-aft and deck-fore ports.
Deck Plate Section (Submarine Interior and Control Room)
A 2 by 3 m deck plate section 140 mm deep: three transverse bearers and two edge coamings carrying a chequered steel plate. It lays the walking flat inside a hull ring section 550 mm below the centre line, and its deck-aft and deck-fore ports run the flat the length of the boat.
Pressure Hull Ring Section (Submarine Interior and Control Room)
A 2 m length of pressure hull on a 3.8 m outer diameter: a 150 mm shell, three internal ring frames with an inner face bar, twelve longitudinal stringers, two clipped cable runs and a lagged service pipe down each bilge.
AnimatedDeck Plate Section with Hatch (Submarine Interior and Control Room)
The same deck plate section built as four rails round a 780 mm opening, with a raised coaming and a dished lid hinged on its after edge.
Pressure Hull Ring Section, Cutaway (Submarine Interior and Control Room)
The same 2 m hull ring with the shell above the centre line removed and a rolled edge rail down each cut, so the frames, stringers, cable runs and bilge pipework stand as an open cage over a visible compartment.
Izakaya Alley at Opening Time (Izakaya Alley and Ramen Shop)
A 24 m by 16 m back alley trading at opening time, laid in one continuous tarmac surface with kerbs and gully grates down both sides. A counter ramen shop opens onto the west side through two 4 m bays under an indigo noren: an 8 m counter with eight stools facing the street,...
AnimatedCigarette Vending Machine (Izakaya Alley and Ramen Shop)
A 1.84 m alley cigarette machine: a narrower steel cabinet with a glazed display of twenty four blank packs in invented colours, unmarked selection keys, a card reader plate and a collection flap on its own node. Nothing on it is a brand or a health mark.
AnimatedDrinks Vending Machine (Izakaya Alley and Ramen Shop)
A 1.92 m alley drinks machine: a steel cabinet, a glazed display of fifteen blank cans and bottles in invented colours, a row of unmarked selection keys, a coin race, a note slot and a collection flap on its own node that swings up. No product carries a name.