Free models · Game-ready GLB
Exterior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
8,171 free GLB models
Yard floodlight mast (Tool Hire Depot and Plant Yard)
Galvanised floodlight mast 5 m tall on a bolted base plate: a tapered column, a charcoal head frame carrying three canted flood lamps with glass lenses and a hooded junction box at working height.
Depot yard fence panel, 3 m (Tool Hire Depot and Plant Yard)
Galvanised mesh fence panel 3 m wide and 2 m tall in a tubular frame on two bolted feet, with a blue site information plate on the rail and side ports at 1 m, for fencing the plant yard.
AnimatedDepot yard fence gate, 3 m (Tool Hire Depot and Plant Yard)
The same fence line as a single leaf gate: a mesh filled tubular leaf 2.8 m wide hung on a heavier post with a drop bolt, a latch keep and a red keep clear plate, swinging clear of the opening.
AnimatedDepot roller shutter door module, 3 m (Tool Hire Depot and Plant Yard)
Yard access module 3 m wide and 3.6 m tall: a 2.4 m by 3 m opening in ribbed grey cladding, charcoal guide channels, yellow impact posts, a shutter hood and an orange slatted curtain that lifts clear of the opening.
Wash bay drain ground tile, 3 m (Tool Hire Depot and Plant Yard)
The 3 m yard module falling to a galvanised channel drain across its middle, with a slotted grating in a recessed frame and a bunded kerb along one edge, for the floor of a wash and test bay.
Marked plant bay ground tile, 3 m (Tool Hire Depot and Plant Yard)
The same 3 m yard module painted as a plant parking bay: a yellow hatched outline standing 5 mm proud of the slab, a charcoal wheel stop across the head of the bay and the same four edge ports.
Depot yard ground tile, 3 m (Tool Hire Depot and Plant Yard)
Power floated concrete yard module 3 m square and 120 mm thick with saw cut joints running each way, a worn charcoal traffic scuff down the middle and edge ports on all four sides.
Tyre Planter (Allotments and Community Garden)
An old tyre filled with earth and planted up with flowers, 0.55 m across, with a second tyre lying beside it waiting for a use. The tyres are rigid solids with no tread flex.
Green Deckchair (Allotments and Community Garden)
The same deckchair in green canvas, so a row of them is not all one colour. The geometry is unchanged.
Old Bath Used as a Trough (Allotments and Community Garden)
A 1.5 m enamelled bath stood on four brick piers and planted up as a trough, 0.46 m to the rolled rim with the old tap hole still in the end. The bath is a rigid shell; there is no water and nothing drains.
Plastic Crate Stack, Blue (Allotments and Community Garden)
The same stack of three crates in pale blue, for mixing colours across a plot. The geometry is unchanged.
Upturned Pot Stack (Allotments and Community Garden)
Four terracotta pots stacked upside down to keep the rain out, 0.63 m high, with two more stood beside them in the grass. One static solid; the pots do not separate.
Plastic Crate Stack (Allotments and Community Garden)
Three stacked ventilated produce crates, just over a metre to the top of the pile and set down slightly out of square. The crates are one solid: they do not come apart or nest.
AnimatedBird Scarer on a Pole (Allotments and Community Garden)
A 1.9 m pole with four arms of old discs and cut plastic streamers on the head, turned by the wind over a sown bed. The head is one node on the pole, so the clip spins the whole spider; the streamers do not flutter on their own.
AnimatedCommunal Tool Store (Allotments and Community Garden)
The site's shared store: a 3 x 2 m timber building 2.3 m at the front under a corrugated pent roof, with a wide braced door and a padlock. The door is one node on its hinge stile; the roof sheets and the padlock are fixed.
Honesty Box Stall (Allotments and Community Garden)
A 1.3 m trestle stall of surplus produce by the gate, with two crates of greens, a painted price card and a locked honesty box with a coin slot. The box is a solid model: it does not open and holds nothing.
National Beehive (Allotments and Community Garden)
A 1.4 m national beehive on a timber stand: a floor, three brood and super boxes with handholds, a crown board and a galvanised roof, with the entrance block at the front. The boxes are modelled as one static stack; nothing lifts off and there are no bees.
Picnic Table (Allotments and Community Garden)
A 1.8 m timber picnic table with benches on both sides, 0.74 m to the table top on crossed A-frame legs. One static solid; the benches are part of the frame.
Hand Painted Site Noticeboard (Allotments and Community Garden)
A 1.8 m hand painted allotment noticeboard on two posts under a little pitched hood, with the site name lettered across the head and four notices pinned to it. The notices are painted geometry and cannot be changed at runtime.
Orchard Apple Tree (Allotments and Community Garden)
A 3.4 m allotment apple tree on a 1.5 m trunk with three low limbs, a broad crown and fruit on it, standing in rough grass. The crown is solid foliage: there is no leaf card, wind or sway.
Hedgerow Section (Allotments and Community Garden)
A 2 m run of mixed boundary hedge 1.5 m high on woody stems, with rough grass at the foot and berries in it. Run ports on both ends, so sections make a boundary of any length.
Timber Fence Panel (Allotments and Community Garden)
A 2 m closeboard fence bay 1.15 m high: two posts, a gravel board, two arris rails and eleven feather edge boards. Run ports on both ends, so bays make a boundary of any length.
Chain Link Fence Panel (Allotments and Community Garden)
A 2 m galvanised chain link bay 1.15 m high on two posts with top and bottom straining wires and a raking stay. The mesh is rigid geometry and does not sag. Run ports on both ends.
AnimatedSite Gate with Padlock (Allotments and Community Garden)
A 2 m allotment site gate: a four rail braced timber leaf hung between two 1.46 m capped posts, with a hasp and a padlock on the closing stile. The leaf is one node on its hinge post, so the clip swings it; the padlock is modelled shut and does not open.