Free models · Game-ready GLB
Exterior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,764 free GLB models
Rubble pile, large (Demolition and Site Clearance)
The same arisings at 6 m across and 2.2 m high, the stockpile a site pushes up before the crusher takes it: broken concrete, brick and steel settled into a long heap with a loose scattered surface.
Rubble pile, small (Demolition and Site Clearance)
The same arisings at 2 m across and 0.7 m high, the size that gathers at the foot of a wall between passes: broken concrete, brick and steel with a loose scattered surface.
Rubble pile, medium (Demolition and Site Clearance)
Heap of demolition arisings 3.4 m across and 1.2 m high: broken concrete, brick and a little steel settled into the shape a dozer blade leaves, with a scattered surface of loose lumps, for the middle of a clearance.
Demolition wall section, down to rubble (Demolition and Site Clearance)
The same 4 m bay after the wall is down: a 500 mm stub of brickwork on the footing with the broken face showing, a heap of graded masonry rubble across the bay and two lengths of bent rebar lying in it, ready for the loader.
Floor slab section with rebar showing, 4 m (Demolition and Site Clearance)
Broken reinforced floor slab 4 m square and 220 mm thick: a saw cut edge on two sides, a ragged broken edge on the others with the reinforcement mesh bent up out of it, a screed patch lifted clear and ground ports on all four sides.
Demolition wall section, breached (Demolition and Site Clearance)
The same wall section taken back by the machine: a full height pier at one end, a ragged stepped edge of brick teeth, a breach right through the middle at ground level and a broken lintel hanging over it, with bent rebar tails showing in the concrete.
Demolition wall section, intact (Demolition and Site Clearance)
Intact masonry wall section 4 m wide, 3.2 m tall and 320 mm thick: brickwork with proud courses, a concrete lintel over a blocked opening, a cream plaster patch on the inner face and a stub of floor beam left in the pocket, with side ports at 1.4 m so a facade runs on.
Mesh fence foot block (Demolition and Site Clearance)
Moulded concrete fence foot 0.6 m long with two slotted sockets and a moulded handle recess, the block a temporary mesh panel stands in, modelled loose so a run of them can be dropped along a line.
Debris netting scaffold bay, 4 m (Demolition and Site Clearance)
Scaffold screen bay 4 m wide and 4 m tall: a tube and fitting frame of standards, ledgers and a plan brace carrying a blue debris netting panel laced to its edges, with side ports at 2 m so a screen runs along a demolition face.
Site hoarding gate panel, 4 m (Demolition and Site Clearance)
The same hoarding line as the site entrance: a 3.4 m sheeted leaf hung on a heavier post with a drop bolt and a latch keep, a red keep clear plate on the closing post, and the leaf swinging clear into the site.
Mesh site fence panel, 3.5 m (Demolition and Site Clearance)
Temporary mesh fence panel 3.5 m wide and 2 m tall in a tubular frame: welded mesh infill, a blue site information plate wired to the rail, and side ports at 1 m so a run of panels closes a compound.
Site hoarding panel, 4 m (Demolition and Site Clearance)
Solid site hoarding bay 4 m wide and 2.5 m tall: blue faced plywood sheeting on a timber frame between two charcoal posts on precast feet, with a capping rail, a blank cream notice board and a yellow warning plate, and side ports so a perimeter repeats.
Mud tracked site ground tile, 4 m (Demolition and Site Clearance)
The same 4 m site module with dried mud trodden across it by the plant: three spread patches standing a few millimetres proud of the slab with two wheel ruts run through them, for the working face and the haul line.
Crushed hardcore haul road tile, 4 m (Demolition and Site Clearance)
The same 4 m site module surfaced with crushed hardcore from the site's own crusher: a 90 mm bed of graded material with loose lumps scattered across it and a rolled crown down the middle, for the haul road and the crusher apron.
Demolition site ground tile, 4 m (Demolition and Site Clearance)
Heavy duty concrete site module 4 m square and 120 mm thick with saw cut joints running each way, laid so its top face is the running surface, with edge ports on all four sides so a whole clearance site repeats from it.
Wayfinding totem (Ferry Terminal and Harbour Crossing)
Double sided wayfinding totem 2.6 m tall: a blue panel on a charcoal plinth with cream direction bands and abstract arrow blocks, a lit strip at the head and a steel edge frame, for the concourse and the marshalling yard.
Covered foot passenger walkway, 4 m (Ferry Terminal and Harbour Crossing)
Covered walkway section 4 m long and 2.6 m wide: a steel deck 0.24 m up with a yellow edge strip, handrails on both sides, four posts and a charcoal canopy with a blue fascia. Ports at both ends so a run reaches from a terminal to a gangway tower.
Terminal roof section, 4 m (Ferry Terminal and Harbour Crossing)
Flat terminal roof cassette 4 m square and 0.42 m deep: a steel deck on charcoal ribs with a grey upstand, a blue fascia band and a rooflight, for roofing a concourse built from facade bays.
Terminal entrance bay with sliding doors (Ferry Terminal and Harbour Crossing)
The same 4 m facade module as an entrance: a 2.4 m opening with two glazed leaves that slide apart into the side glazing, a charcoal head box with the operator above them and a yellow threshold strip in the floor.
Terminal facade bay, 4 m (Ferry Terminal and Harbour Crossing)
Glazed terminal facade module 4 m wide and 3.6 m to the eaves: a concrete cill, full height glazing in charcoal mullions, a blue spandrel band under a grey head and a steel eaves flashing. Ports at both ends so a frontage repeats.
Freight box trailer (Ferry Terminal and Harbour Crossing)
Box semi trailer 13.6 m long and 4.0 m tall: a white body on a charcoal chassis with a blue lower band, ribbed side panels, twin rear doors with their locking bars, landing legs, a kingpin plate and four wheels on the rear bogie.
Lorry tractor cab (Ferry Terminal and Harbour Crossing)
Sleeper tractor unit 6.2 m long and 3.6 m tall in red: a cab over engine with a deep windscreen, a roof deflector, a charcoal chassis with the fifth wheel plate, catwalk, tanks, exhaust stack and six wheels that roll.
Panel van (Ferry Terminal and Harbour Crossing)
Medium panel van 5.4 m long and 2.5 m tall in white with a blue flank band: a glazed cab, a high sided body with a sliding side door line and twin rear doors, charcoal bumpers and four wheels that roll.
Family car, blue (Ferry Terminal and Harbour Crossing)
The same 4.3 m family hatchback in deep blue, so a queue of cars in a marshalling lane is not all one colour. Identical body, glazing and rolling wheels.