Free models · CC0
Sci fi
Every model below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
867 free GLB models
Hangar bay shell section (UFO Crash Site and Recovery Facility)
A 6 m deep section of an 18 m span hangar bay: a segmental arch shell with real wall thickness, a 0.15 m floor slab, three internal portal frames, cladding ribs, a glazed clerestory each side, three roof lights and four high bay lamps. Sections butt on a 6 m pitch.
Cargo net and slings (UFO Crash Site and Recovery Facility)
Lifting tackle laid out on the ground: a folded cargo net of nine by seven cords over a low pile, four coiled strops with thimbles and shackles, a master link and two spreader bars.
Wash-down bay (UFO Crash Site and Recovery Facility)
A 5.4 by 6.4 m drive-through wash-down bay: a portal frame with an arched ridge, side and overhead spray bars with twenty one nozzles, a grated sump floor inside concrete kerbs and a pump skid with its delivery hose.
Tented hangar (UFO Crash Site and Recovery Facility)
An 18 by 16 m fabric hangar: five steel arches on concrete rails carrying a lofted barrel skin with five purlins, a closed end gable and a rolled door flap on the open end.
Generator trailer (UFO Crash Site and Recovery Facility)
A towable diesel generator: louvred acoustic canopy with a hinged access door, roof exhaust, control panel with lamps and outlets, A-frame drawbar, jockey wheel and a single axle.
Counterbalance forklift (UFO Crash Site and Recovery Facility)
A 3 m counterbalance forklift: bevelled body with a counterweight tail, overhead guard, seat and steering column, a two-stage mast on a hinged node and a fork carriage with two tines on its own node.
Transport crate (UFO Crash Site and Recovery Facility)
A 6.2 m ribbed steel transport crate for a recovered hull section: corrugated sides, eight corner castings with lifting eyes, latching bars, a hazard chevron band and a blank data plate.
Low loader trailer (UFO Crash Site and Recovery Facility)
A drop-deck low loader 18 m long over its ramps: gooseneck with kingpin and landing legs, a deep well deck on twin side rails with twelve cross members, three rear axles on duals and two hinged loading ramps as separate nodes.
Recovery tractor unit (UFO Crash Site and Recovery Facility)
A three-axle 6x4 tractor unit for moving a low loader: bevelled cab and sleeper with a raked screen, twin exhaust stacks, mirror arms, bull bar with a light row, twin rear duals, side fuel tank, catwalk and a fifth wheel plate.
Heavy lift crane (UFO Crash Site and Recovery Facility)
A five-axle all-terrain lifting crane: ten-wheel carrier with a low cab, four extended outriggers on jack pads, a slewing house with a counterweight stack, a three-section telescopic boom raised to 48 degrees on a hinged node, a lift ram and a free-hanging hook block.
Survey marker set (UFO Crash Site and Recovery Facility)
Six folded evidence markers with blank number plates, six flagged survey stakes, a banded ranging pole and a tape reel, arranged as a working set over a 4 m area.
Sensor tripod (UFO Crash Site and Recovery Facility)
A 2 m survey tripod with footed legs, a spreader brace, an instrument head with a lens and a status lamp, a whip antenna and a battery case on the ground.
Field tent (UFO Crash Site and Recovery Facility)
A 4.4 m ridge tent: a lofted fabric skin with vertical walls and a bowed ridge, external ridge pole, two uprights, four guys with ground pins and a rolled door flap.
Cordon fence corner (UFO Crash Site and Recovery Facility)
A right-angle cordon corner turning a taped line through 90 degrees, with ports on the west and south arms.
Cordon fence run (UFO Crash Site and Recovery Facility)
A 4 m cordon run: three footed posts, two tubular rails, a taped line and a blank warning plate. Ports at both ends so runs chain.
Site floodlight rig (UFO Crash Site and Recovery Facility)
A towable lighting tower: wheeled base with four outrigger feet, a generator housing, a two-stage telescopic mast and a crossbar carrying four lamp heads on a single hinged node.
Tarpaulin cover on a frame (UFO Crash Site and Recovery Facility)
A 5.3 m scaffold frame with a ridge bar and a sagging tarpaulin thrown over it, guyed to four ground pins, for covering a wreck piece in the open.
Charred tree stump (UFO Crash Site and Recovery Facility)
A 2 m burned tree stump snapped off above the roots: a tapered charred trunk with five splintered crown spikes, six buttress roots and a scorched soil pad.
Scorched ground tile (UFO Crash Site and Recovery Facility)
An 8 m square ground tile with a 5 m burn disc and fourteen radiating scorch streaks. Deck surface at 0.5 m with edge ports so tiles chain in any direction.
Crash furrow end tile (UFO Crash Site and Recovery Facility)
The furrow tile with the trench fading out into a churned terminal spoil pile, for closing the end of a skid run.
Impact crater (UFO Crash Site and Recovery Facility)
An 18 m impact crater: a 12 m bowl 0.5 m deep inside a raised rim of thrown-up earth, with sixteen hull shards scattered over the rim. Ground surface matches the 0.5 m tile deck height.
Crash furrow ground tile (UFO Crash Site and Recovery Facility)
An 8 m square ground tile gouged by a craft skidding through it: a curved furrow with raised spoil bermed along both sides and shards left in the trench. Deck surface at 0.5 m with edge ports so tiles chain in any direction.
Debris scatter cluster (UFO Crash Site and Recovery Facility)
A 6 m scatter of twenty two hull shards in two alloy finishes plus five twisted spars, laid flat as they fell for dressing a crash site.
Fragment embedded in soil (UFO Crash Site and Recovery Facility)
A 2.4 m curved hull shard driven upright into a churned mound of earth, with a bent stringer and a torn dark panel still attached.