Free models · CC0
Environments
Every environment below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole environments set from the packs.
94 free GLB models
Snow bollard (Mountaineering and Summit Expedition)
Horseshoe trench cut in hard snow leaving a load-bearing bollard, with the rope laid in the groove.
Snow pit wall (Backcountry Snowboarding and Avalanche Safety)
Dug snow pit with a smoothed upslope wall showing five layers, an isolated column for a stability test and the spoil piled outside.
Natural kicker mound (Backcountry Snowboarding and Avalanche Safety)
Rounded natural snow mound with a takeoff lip and a fall-away landing, with a run-in track and broken wind slab on the shoulders.
Wind lip (Backcountry Snowboarding and Avalanche Safety)
Wind-formed roller across a slope, scoured on the windward face and loaded soft on the lee, with a board track over it.
Scorched ground tile (UFO Crash Site and Recovery Facility)
An 8 m square ground tile with a 5 m burn disc and fourteen radiating scorch streaks. Deck surface at 0.5 m with edge ports so tiles chain in any direction.
Crash furrow end tile (UFO Crash Site and Recovery Facility)
The furrow tile with the trench fading out into a churned terminal spoil pile, for closing the end of a skid run.
Impact crater (UFO Crash Site and Recovery Facility)
An 18 m impact crater: a 12 m bowl 0.5 m deep inside a raised rim of thrown-up earth, with sixteen hull shards scattered over the rim. Ground surface matches the 0.5 m tile deck height.
Crash furrow ground tile (UFO Crash Site and Recovery Facility)
An 8 m square ground tile gouged by a craft skidding through it: a curved furrow with raised spoil bermed along both sides and shards left in the trench. Deck surface at 0.5 m with edge ports so tiles chain in any direction.
Settling pond edge module (Ore Processing and Haulage Plant)
An 18 m module of settling pond edge: a compacted bank with a placed gravel beach, the water surface, a silt fence on stakes along the crest, a staff gauge at the water line, an outlet pipe through the bank to a headwall and a short handrail run.
Tailings embankment berm module (Ore Processing and Haulage Plant)
A 16 m module of tailings dam crest: a rockfill embankment section with a placed riprap upstream face, a crest haul road with edge windrows and survey marker posts, a toe drain and a decant pipe running along the toe, with pond water lapping the upstream slope.
Coarse ore stockpile cone (Ore Processing and Haulage Plant)
A live coarse ore stockpile: a 30 m conical pile at the angle of repose with a drawn down crest above the reclaim feeders and coarse rock spilled around the toe.
Product stockpile windrow (Ore Processing and Haulage Plant)
A long product stockpile: a 38 m windrow with battered ends, a flat reclaim pad worked into one flank and spilled product around the toe.
Graded dust berm (Lunar Surface Colony and Rovers)
A 10 m graded regolith berm pushed up to shield a work area from rover dust: a tapered bank with a compacted apron, a spoil line along its toe and a marker post at each end.
Rover track ruts tile (Lunar Surface Colony and Rovers)
A 12 m square tile of trafficked regolith: a pair of 1.5 m gauge rover ruts with chevron grouser prints pressed along them, spoil ridges either side and a line of boot prints alongside.
Rille edge tile (Lunar Surface Colony and Rovers)
A 12 m square tile carrying the edge of a collapsed lava channel: a 6.8 m wide rille cut 2.3 m below the plain with slumped banks either side, feathered across its width only so the channel runs straight through into the next tile.
Crater rim segment tile (Lunar Surface Colony and Rovers)
A 12 m square tile dominated by the rim and inner wall of a 10.8 m crater: a raised crest, a bowl falling away inside it and blocky ejecta scattered along the crest.
Boulder field tile (Lunar Surface Colony and Rovers)
A 12 m square tile strewn with eleven weathered boulders between 0.6 and 2.1 m across, sitting part buried in rolling regolith around a shallow crater.
Regolith ground tile (Lunar Surface Colony and Rovers)
A 12 m square regolith ground tile: rolling mare relief with four impact craters between 1.2 and 4.4 m across, feathered to a common rim height on all four edges so tiles butt together in any orientation.
Broken Wire Run (Trench Line 1917)
Cut and collapsed section of wire belt.
Debris Field Tile (Trench Line 1917)
Ground tile scattered with broken boards, cases and spent brass.
Mud Pool Tile (Trench Line 1917)
Four-metre tile of churned mud pitted with water-filled hollows.
Shell Crater (Large) (Trench Line 1917)
Large shell crater with spoil and broken timber in the bowl.
Wire Entanglement Straight (Trench Line 1917)
Belt of barbed wire strained between angled pickets.
Wire Entanglement Corner (Trench Line 1917)
Right-angle turn in a barbed wire belt.