Free models · Game-ready GLB
Buildings
Every realistic sci-fi building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
71 free GLB models
Transfer tunnel with hatch (Orbital Station and Docking Bays)
A 2 m square-section transfer vestibule with a clear 1.7 m bore between two hatch ports, a 1.5 m swing hatch standing open on a named hinge node with a viewing pane, interior rails and a wall control panel.
External stowage platform (Orbital Station and Docking Bays)
A 3.2 by 2 m external stowage platform: a slatted deck on standoffs, four spare orbital replacement units under tie-down straps, a side bracket with a truss port, a grapple fixture and an EVA rail.
Truss rotary joint (Orbital Station and Docking Bays)
A 2.7 m truss rotary joint: two short truss stubs, fixed race housings and a 3 m drive ring with twelve trundle bearing blocks on a named rotating node, plus a routed power line.
Stowed radiator panel array (Orbital Station and Docking Bays)
The radiator retracted for launch or safing, with the three panels folded into a parallel stack on their hinge nodes above the pump bracket.
Deployed radiator panel array (Orbital Station and Docking Bays)
A deployed thermal radiator: a pump and rotary bracket on a truss port, a spine beam and three 3.4 by 2.6 m panels fanned on named hinge nodes with fluid line ribs.
Stowed solar array canister (Orbital Station and Docking Bays)
A 4.1 m launch-stowed array canister: the same rotating base, a mast canister and two folded blanket boxes clamped either side with yellow release latches and a grapple fixture.
Short connecting tunnel (Orbital Station and Docking Bays)
A 2.7 m pressurised connecting tunnel with hatch ports at both ends, a convoluted bellows mid-section, four external stiffener rods and translation rails on all four faces.
Deployed solar array wing (Orbital Station and Docking Bays)
An 11.5 m deployed photovoltaic wing: a rotating base canister on a named gimbal node, a lattice mast and two 9.2 by 3.3 m blankets with cell strips, edge battens and a tensioning bar.
Truss end cap (Orbital Station and Docking Bays)
A 2 m closed truss end: half bay, a plated bulkhead with four fluid couplings, an avionics box, a low-gain antenna mast and one truss port so a run can be terminated.
Truss bay segment with utilities (Orbital Station and Docking Bays)
The truss bay carrying a full utility fit: two orbital replacement unit boxes with gold covers and a routed fluid line loop between the longerons.
Truss bay segment (Orbital Station and Docking Bays)
A 4 m aluminium truss bay on a 2.4 m square section: four longerons, ribbed bulkhead frames, cross bracing, corner end fittings, a utility box, an EVA rail and a grapple fixture.
Service module with tankage (Orbital Station and Docking Bays)
A 7.4 m service module: forward hatch port, four external spherical propellant tanks on struts, a main engine bell, two reaction control pods and a nadir body radiator.
Expandable soft-goods habitat (Orbital Station and Docking Bays)
A 7.8 m expandable habitat: a lofted soft-goods shell scalloped by eight longitudinal restraint straps, rigid metal end bulkheads, an aft hatch port, four hoop straps and a grapple fixture.
Crew airlock module (Orbital Station and Docking Bays)
A 4.7 m crew airlock, 6.0 m overall with the hatch open: aft hatch to the station, a 1.4 m forward EVA hatch swung open on a named hinge node, two external high-pressure gas tanks, a nadir depress pump box and dense translation rails.
Cargo logistics module (Orbital Station and Docking Bays)
A 6.7 m pressurised logistics module: one forward berthing hatch, a blanked conical aft service section with four reaction control pods and two gas tanks, a deployed antenna and a grapple fixture.
Crew habitation module, gold blanket (Orbital Station and Docking Bays)
The habitation module finished with gold multi-layer insulation over the mid-section and dark stowage racks, for stations that mix blanket liveries across their pressurised elements.
Compact laboratory module (Orbital Station and Docking Bays)
A 7.2 m short-body laboratory module on the same hatch grid, with one pair of experiment canisters, a shorter radiator and fewer rail runs for tight station layouts.
Four-port station node (Orbital Station and Docking Bays)
A 3.6 m pressurised connecting node with forward, aft, port and starboard hatch ports on machined stubs, a zenith avionics box, grapple fixture, low-gain antenna and EVA translation rails.
Cupola observation module (Orbital Station and Docking Bays)
A seven-window observation cupola, 3.1 m across the body and 3.7 m across the open shutters, that berths on a nadir hatch: a round centre pane, six angled side panes in machined frames and six external shutters opened on named hinge nodes.
Research laboratory module (Orbital Station and Docking Bays)
An 11.2 m pressurised laboratory module: 4.2 m diameter hull with hatch ports at both ends, a zenith payload platform carrying two experiment canisters, two viewports, a deployed body radiator and full-length EVA rails.
Six-port pressurised hub (Orbital Station and Docking Bays)
A 4.1 m six-port hub with forward, aft, port, starboard, zenith and nadir hatches on machined radial stubs, diagonal gusset structure between the stubs and four EVA rail runs.
Crew habitation module (Orbital Station and Docking Bays)
A 9.2 m crew habitation module with a three-window nadir band, two external stowage racks on struts, standoff debris shields on the ram face, a grapple fixture and EVA rails on a white blanketed hull.
Stair Block (Arena Shooter Map Kit)
Stair Block with bevelled gothic-industrial construction and static fittings.
Force Field Frame (Arena Shooter Map Kit)
Force Field Frame with bevelled gothic-industrial construction and static fittings.