Free models · Game-ready GLB
Buildings
Every building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
2,991 free GLB models
Illuminated pylon sign frame (Fast Food Counter and Drive-Thru)
A 4.6 m forecourt pylon sign frame: a cast plinth, two steel uprights, a blank double-sided upper cabinet, a blank lower changeable panel and an accent cap.
Entrance canopy (Fast Food Counter and Drive-Thru)
A 3.6 m entrance canopy: two square columns on cast bases with head plates, a chamfered deck, a blank accent fascia band and a soffit with four recessed downlights.
Hardened entry portal (Cold War Missile Silo and Command Bunker)
The graded entry to the buried works: a sloping approach with retaining walls and handrails, eight steps down to a platform, a headwall carrying a hardened door in a stepped frame, a blast hood over the opening and a wall alarm box.
Site water tower (Cold War Missile Silo and Command Bunker)
A 13.9 m elevated water tower: four splayed legs on pad footings with two levels of cross bracing, a riveted tank with a conical bottom and domed roof, band seams, a roof hatch, a balcony with a handrail, a caged ladder and a valved downcomer.
Site generator house (Cold War Missile Silo and Command Bunker)
A hardened standby power building: poured walls on a raised slab with a parapet roof, two louvred intake banks, a steel personnel door under a canopy, bollards, a lagged exhaust stack with a rain cap, a roof radiator fan and a bunded day tank.
Capsule blast door with locking wheel (Cold War Missile Silo and Command Bunker)
The capsule entry closure: a concrete surround with a stepped steel frame, a raised sill and a hinge column, a slab leaf with eight radial locking dogs, three hinge arms and a viewing port, and a four-spoke locking handwheel on its hub.
Launch control capsule cutaway (Cold War Missile Silo and Command Bunker)
A cutaway of a buried launch control capsule: a 9 m steel pressure shell with internal stiffener rings, an aft bulkhead, a forward door aperture ring, a suspended grating floor on coil isolators, and ceiling cable trays with a ventilation duct.
Personnel access shaft cutaway (Cold War Missile Silo and Command Bunker)
An 8.6 m cutaway personnel shaft: a concrete shaft with a steel liner, two grating landings with handrails, a caged ladder run, a cable tray, a floor grating at the bottom and a collar with a hinged hatch at grade.
Silo exhaust duct headworks (Cold War Missile Silo and Command Bunker)
The exhaust duct headworks at grade: a battered concrete plinth with a rectangular throat built from four slabs, a recessed bore, a heavy grille, a curved deflector hood on struts, a cowled relief stack, a hinged deck cover and deck handrails.
Silo headworks collar (Cold War Missile Silo and Command Bunker)
The reinforced concrete headworks around the tube bore at grade: a round apron, a raised curb with a steel closure seat, twin door track plinths with rolled rails, anchor blocks, a cable duct, a hinged personnel hatch and a lightning mast.
Sliding silo blast door (Cold War Missile Silo and Command Bunker)
A ballistic sliding closure: a 6.2 m concrete slab with banded steel edges, lifting eyes and eight rollers, parked open at the far end of an 11.6 m twin rail track, with the bore ring at the closed end and a gas generator actuator with a push rod.
Launch tube cutaway section (Cold War Missile Silo and Command Bunker)
A cutaway section of a hardened launch tube: an 18 m concrete wall 0.52 m thick with a welded steel liner, stiffener rings, three grating work platforms with handrails, a caged ladder, cable raceways, a stepped launch mount and a hazard-banded muzzle seat.
Mezzanine Edge (Retro Arcade and Mall 1989)
Four-metre mezzanine edge slab with front glass balustrade.
Mall Security Cart (Retro Arcade and Mall 1989)
Compact electric mall patrol cart with canopy, seat and four wheels.
Palm Planter (Retro Arcade and Mall 1989)
Decorative palm in a tapered magenta planter with eight angular fronds.
Coin Fountain (Retro Arcade and Mall 1989)
Small wishing fountain with shallow water and oversized decorative coin.
Roller Shutter (Retro Arcade and Mall 1989)
Closed four-metre ribbed metal shop shutter.
Mall Stage (Retro Arcade and Mall 1989)
Low atrium performance stage with one front step.
Atrium Column (Retro Arcade and Mall 1989)
Four-metre atrium column with teal base and magenta capital.
Directory Sign (Retro Arcade and Mall 1989)
Standing mall directory with blank diagram panel and coloured header.
Payphone Bank (Retro Arcade and Mall 1989)
Three payphone stations with metal call panels and black receivers.
Tile Floor (Retro Arcade and Mall 1989)
Four-metre cream tile floor module with teal and magenta cross lines.
Glass Elevator (Retro Arcade and Mall 1989)
Glass elevator cabin with open front split-door datum; static display.