About
A kerbside drop off module, 6.00 m wide, 6.05 m deep and 2.98 m tall. Half the plate is a raised footway with a kerb face, a tactile strip and a lit kerb line; it carries a four post boarding shelter with a curved roof, a glazed back panel, a bench and a lit information panel. The road half carries hatched drop off bay markings, three lit bollards and a bay sign on a post. The module is a 6 m square on the 6 m lane grid, 0.18 m thick, with "lane" ports at the edge midpoints 0.09 m above the base facing outward, so plates butt edge to edge in any direction. This module carries "lane-north" and "lane-south" on the road side, so it slots into a lane run. Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Kerbside drop-off module (Hover Transit and Antigrav Fleet)” asset in my project. Model: https://cdn.3dassets.dev/assets/17123/v1/model.glb Asset page: https://3dassets.dev/assets/hover-transit-and-antigrav-fleet-kerbside-drop-off-mod-1ab418db Description: A six metre kerbside module with a raised footway, boarding shelter, bollards, bay markings and lane ports on the road edges. - Dimensions (X × Y × Z): 6 × 2.98 × 6.05 metres - Triangles: 1.7k - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/17123/v1/model.glb', (gltf) => {
scene.add(gltf.scene)
})Kerbside drop-off module (Hover Transit and Antigrav Fleet)
A six metre kerbside module with a raised footway, boarding shelter, bollards, bay markings and lane ports on the road edges.
More in Roads & Infrastructure
Dock Platform (Quiet Lake Fishing)
2.4 m square timber module; four compatible edge ports at deck height 0.7 m.
Harbor Building Quay (Harbor & Tackle)
8 × 4 m building platform with six banded piles, chamfered decking and an offset 1.8 m pier connection.
Sloped Harbor Gangway (Harbor & Tackle)
Three-meter ramp with slatted walking surface, traction battens and continuous handrails.
Corner Pier Section (Harbor & Tackle)
L-shaped pier with an open water notch and two orthogonal connection faces.
T Junction Pier (Harbor & Tackle)
5.4 m crosshead with a south approach, three 1.8 m connection faces and independently planked branches.
Straight Pier Section (Harbor & Tackle)
1.8 × 3 m pier with individual chamfered planks, iron collars and exposed fasteners; deck at 0.85 m.
Pad edge wind baffle (Hover Transit and Antigrav Fleet)
A five metre curved wind baffle screen with six louvre slats, a lit top rail and splayed feet, for sheltering a landing pad edge.
Skylane direction gantry sign (Hover Transit and Antigrav Fleet)
A five metre cantilever direction sign with a framed board, three lit legend bands, a chevron and an under-board lamp bar.
Hover parking stack frame (Hover Transit and Antigrav Fleet)
A three level open parking stack frame with grid decks, edge guards, glowing bay strips and a head canopy.
Hover service bay with lift deck (Hover Transit and Antigrav Fleet)
An open four column service bay with a scissor lift deck at 1.15 m, hazard guards, overhead light rails and a rear tool board.
Repulsor charging pylon (Hover Transit and Antigrav Fleet)
A kerbside charging pylon with an inductive coil head, a swing boom and a drop coupler over the bay, plus a lit status panel.
Skylane air traffic gantry (Hover Transit and Antigrav Fleet)
A thirteen metre span traffic gantry with a lattice cross beam, four signal heads, sensor pods and a lit lane band.
Similar assets
AnimatedKennel bank, small, six bay (Primary Care Clinic and Veterinary Practice)
A 1.35 m stainless kennel bank of six small bays in two tiers: a chamfered shell on a coved recessed plinth, sloped floor trays with drain lips, bay dividers and one named bar grille door per bay on knuckle hinges with a cam latch and a blank name card.
Shelter Map Board (Underground Survivor Hideout)
Shelter Map Board: 1.2 × 0.8 × 0.1 m nominal survival panel assembly.
Cupola observation module (Orbital Station and Docking Bays)
A seven-window observation cupola, 3.1 m across the body and 3.7 m across the open shutters, that berths on a nadir hatch: a round centre pane, six angled side panes in machined frames and six external shutters opened on named hinge nodes.
Check-in desk module, accessible bay (Hotel and Resort Operations)
The check-in counter module as a 0.76 m accessible bay with an open knee recess, a lowered worktop, levelling feet and a rear support rail.
Six-tier grandstand module (Grand Prix Circuit and Open-Wheel Cars)
Six-tier grandstand module in an original generic circuit family.
Raised Family Sleep Bay (Prehistoric Survivor Settlement)
Raised Family Sleep Bay: 1.6 × 0.7 × 2 m nominal survival bed assembly.
Glasshouse bay module (Garden Centre and Florist)
A 2 m retail glasshouse bay on a 4 m span: half width aluminium portal frames at both edges, glazed side walls on a 450 mm dwarf wall, two glazed roof slopes, eaves gutters and a ridge capping.
Research laboratory module (Orbital Station and Docking Bays)
An 11.2 m pressurised laboratory module: 4.2 m diameter hull with hatch ports at both ends, a zenith payload platform carrying two experiment canisters, two viewports, a deployed body radiator and full-length EVA rails.
Crew habitation module (Orbital Station and Docking Bays)
A 9.2 m crew habitation module with a three-window nadir band, two external stowage racks on struts, standoff debris shields on the ram face, a grapple fixture and EVA rails on a white blanketed hull.
Compact laboratory module (Orbital Station and Docking Bays)
A 7.2 m short-body laboratory module on the same hatch grid, with one pair of experiment canisters, a shorter radiator and fewer rail runs for tight station layouts.
Crew habitation module, gold blanket (Orbital Station and Docking Bays)
The habitation module finished with gold multi-layer insulation over the mid-section and dark stowage racks, for stations that mix blanket liveries across their pressurised elements.
Six-port pressurised hub (Orbital Station and Docking Bays)
A 4.1 m six-port hub with forward, aft, port, starboard, zenith and nadir hatches on machined radial stubs, diagonal gusset structure between the stubs and four EVA rail runs.