Loading model
About
Everything needed to pitch a travelling circus on a field. The big top is modular: fourteen 4 m canvas bays, one of them a doorway, close a 17.5 m ring on their own vertex ports under a fourteen gore striped cone, skirted with scalloped valance and held down by guy lines, quarter poles, a centre pole and stakes. Inside it are an eight piece ring kerb that closes into a circle, a raked sawdust floor, banks of tiered bench seating and gilt ringside boxes. Front of house is a bulb lit entrance arch, a pay box with a serving hatch, blank poster boards, showground fencing with a gate, bunting, festoon lighting, a popcorn cart and a candyfloss stand. The acts bring a trapeze frame, a safety net, a high wire and its platforms, a human cannon, a unicycle, juggling clubs and rings, a spinning plate stand, hoops and a hoop stand, pedestals and tubs, a clown car, stilts, a strongman weight, a conjuring cabinet, a dressing mirror, a rolled carpet, trunks, crates and the sledgehammer the stakes go in with. The yard behind holds living wagons in two liveries, a tractor unit, an empty cage wagon, a generator trailer, cable drums, flood lamps and hay bales. Clips are rigid node transforms only: hatches lift, doors and the field gate swing, every wheel rolls, the plate, hoop, drum and candyfloss bowl spin, the trapeze bar swings, the cannon barrel elevates and the lamp head tilts. The canvas, the guy lines, the safety net, the high wire and the bunting are modelled stiff and stated as static, because flexible material needs a joint per element that one rigid node cannot give. There are no animals in this pack: the cage wagon and the pedestals travel empty, and every poster board, wagon panel and banner is blank, with no wording of any kind on it. Original AI-generated CC0 geometry, prepared for human review. No physics, gameplay, colliders, navigation or embedded lights.
Files load directly from the CDN. Choose the pieces you need. Colliders, navigation and gameplay scripts are supplied by your game.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the pack.
Use the “Travelling Circus and Big Top” pack in my project. Manifest (JSON, every model with its CDN URL): https://3dassets.dev/api/v1/packs/travelling-circus-and-big-top Starter scene (one GLB with every piece placed): https://cdn.3dassets.dev/assets/36278/v1/model.glb Pack page: https://3dassets.dev/packs/travelling-circus-and-big-top Description: 54 low-poly travelling circus models: a modular big top of canvas bays, striped cone, valance, masts and guys, the ring, sawdust and seating, a ticket booth, arch, trapeze, high wire, net, human cannon, clown car, wagons, carts and props, in one pitched showground. - 55 GLB models, 2.3 MB in total - Units: metres, +Y up, shared scale and palette across the pack - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader; no additional decoders required. Load models individually from the manifest, or the starter scene as one file.
Also available as a JSON manifest or via the MCP server.
Common questions
How do I use Travelling Circus and Big Top with my AI development tools?
How do I get started?
Which game engines and tools can I use Travelling Circus and Big Top with?
How do I import this pack into Unity, Godot, Unreal or Blender?
Can I use Travelling Circus and Big Top in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Do I have to download the whole pack?
Do the models in Travelling Circus and Big Top fit together?
Game kit
Travelling Circus and Big Top
54 low-poly travelling circus models: a modular big top of canvas bays, striped cone, valance, masts and guys, the ring, sawdust and seating, a ticket booth, arch, trapeze, high wire, net, human cannon, clown car, wagons, carts and props, in one pitched showground.
One GLB with every piece placed in a starter scene. Each model is also below on its own.
View demoEverything in this pack
Showground Ground Tile (Travelling Circus and Big Top)
A 4 m square of trodden showground, 6 mm thick, with four low humps rolled into it. Edge ports on all four sides tile a whole field without a seam.
Big Top Canvas Bay (Travelling Circus and Big Top)
A 4 x 3.4 m red and white sidewall bay with a laced batten on each edge and timber hem and head rails. Fourteen of them close a 17.5 m ring, edge ports landing on the polygon's own vertices.
Big Top Entrance Bay (Travelling Circus and Big Top)
The same sidewall bay with a 2 m doorway cut through it under a rolled canvas head on two timber jambs, for the one bay of the ring the crowd walks in through. Ports and height are unchanged, so it drops into any position in the ring.
Big Top Striped Roof Cone (Travelling Circus and Big Top)
The tent's roof: fourteen red and white gores rising 4.2 m to a gold crown ring, 18.6 m across the eaves so it oversails the sidewall. Set it on the wall head, over the centre pole; the gold crown ring caps the point where the fourteen gores meet.
Big Top Scalloped Valance (Travelling Circus and Big Top)
A 4 m run of scalloped valance, five gold tongues under a red band with a white bob on each point. It hangs at the eave over a canvas bay, and fourteen runs skirt the whole tent.
Big Top Centre Pole (Travelling Circus and Big Top)
The 8.9 m king mast that carries the crown of the tent: a tapered timber pole on a steel spreader plate, two rigging rings and a gold ball with a pair of pennants over it. It stands in the middle of the ring.
Big Top King Pole (Travelling Circus and Big Top)
A 4.6 m quarter pole: a timber mast on a spreader plate with a cross head, a rigging ring for the roof lines and a gold cap. Four of them carry the cone between the centre pole and the sidewall, standing where the roof still has the height for them.
Tent Guy Line and Tensioner (Travelling Circus and Big Top)
A guy line as stiff geometry: one straight 4 m rope from the wall head down to a raked steel stake, with a two block timber tensioner on it. Static by design, because a rope that hangs and stretches is not reachable with a rigid node transform.
Tent Stake (Travelling Circus and Big Top)
A 700 mm steel tent stake driven at a rake, with a burred head and the churned ground round it. Two dozen of them hold a big top down, and the same stake anchors rigging, fencing and a safety net.
Circus Ring Kerb Segment (Travelling Circus and Big Top)
One eighth of the ring kerb: a 8 m diameter red kerb 300 mm high with a white capping, curved through 45 degrees. Eight of them attach end to end and close the circle.
Sawdust Ring Floor (Travelling Circus and Big Top)
The floor inside the kerb: a 8 m disc of raked sawdust 50 mm deep with four scuffed patches worn into it. Drop it inside a closed ring of kerb segments.
Tiered Bench Seating Bank (Travelling Circus and Big Top)
A 5 m bank of five raked bench tiers on timber frames, painted red and blue with a foot board on each step and a steel back rail. Four banks face a ring on each side.
Ringside Box (Travelling Circus and Big Top)
A 2.8 x 1.9 m raised ringside box: a boarded deck with a red carpet, gilt corner posts and rails on three sides, and four bentwood chairs facing the ring. The ring side is left open.
AnimatedCircus Ticket Booth (Travelling Circus and Big Top)
A 1.9 x 1.7 x 3.1 m timber pay box with a red serving front, a counter shelf, a bulb lit scalloped skirt roof and a blank fascia board. The hatch over the counter is one node on its head rail.
Circus Entrance Arch (Travelling Circus and Big Top)
A 5.2 m wide bulb lit entrance arch on two blue piers: a red and white banded head with eleven lamps along it and a blank 2.6 x 0.95 m sign panel under it, ready for a title in a game's own type.
Circus Poster Board (Travelling Circus and Big Top)
A 1.6 x 2.3 m double sided bill board on two raking timber legs, with a plain framed face left blank for a project to letter itself. Nothing on it is readable, so it carries no wording of its own.
Circus Poster Board, Gold Frame (Travelling Circus and Big Top)
The same blank bill board in a gold frame on a blue face, for a second poster style along a run of boards. The geometry is unchanged.
Showground Fence Panel (Travelling Circus and Big Top)
A 2.5 m fence bay: white pales on two red rails between capped timber posts, 1.15 m high. Run ports at both ends carry a fence right round a pitch.
AnimatedShowground Fence Gate (Travelling Circus and Big Top)
The same fence bay with its infill hung as a gate leaf on the left post, so a run of fence has a way through it. The leaf is one node on the hinge stile and swings clear of the run.
AnimatedTrapeze Rig (Travelling Circus and Big Top)
A 5.4 m free standing trapeze frame: four raking steel legs on ground plates, braced twice a side, with a red top beam at 5.6 m. The fly bar hangs on two stiff lines from the beam and is one node on the beam's own axis.
Aerial Safety Net (Travelling Circus and Big Top)
A 6.4 x 4.2 m safety net on six steel uprights with raking stays, the mesh modelled as stiff cords sagging half a metre in the middle. Static: a net that gives under a body needs a joint per knot.
Tightrope and Platforms (Travelling Circus and Big Top)
A 8.4 m high wire between two 3.6 m platforms, each on four legs with a rung ladder, blue guard boards and a raking stay. The wire is stiff geometry and static, because a wire that dips under a walker is not one rigid body.
AnimatedHuman Cannon (Travelling Circus and Big Top)
A wheeled stage cannon: a blue bed on a black chassis, two gilt trunnion cheeks and a 3.1 m red barrel with gold breech and muzzle bands. The barrel is one node on the trunnion pin, so it elevates as a rigid body while the carriage stays put.
AnimatedCircus Unicycle (Travelling Circus and Big Top)
A 680 mm unicycle: a twelve spoke steel wheel with gold pedal cranks, a red fork and a leather saddle at 930 mm. The wheel is one node on its own axle, so the clip rolls it without moving the frame.
Juggling Clubs (Travelling Circus and Big Top)
A set of three juggling clubs, one stood on its knob and two lying crossed: 630 mm turned bodies in red, blue and gold on white handles with gold end caps. Static props, sized to a human hand.
Juggling Rings (Travelling Circus and Big Top)
Three 660 mm juggling rings in red, blue and gold, leaning against each other on a timber prop tray. Static props; the rings are solid rims, not hoops a performer can flex.
AnimatedSpinning Plate Stand (Travelling Circus and Big Top)
A 1.5 m plate spinning stand: a weighted black base, a tapered timber rod and a 600 mm white plate with a red rim on a gold tip. The plate is one node on the tip, so it spins in place.
Circus Hoop (Travelling Circus and Big Top)
A 1.1 m gilt performing hoop leaning on a small timber chock, the way one is left at the ring side between acts. Static prop; the hoop is a solid rim.
AnimatedPerforming Hoop Stand (Travelling Circus and Big Top)
A 2.4 m hoop stand: a weighted base, two blue uprights and a 1.3 m red hoop spoked in gold, hung so it turns about its own axis. The hoop is one node and spins; the stand does not move.
Circus Pedestal (Travelling Circus and Big Top)
A 600 mm ring pedestal: a red drum on gilt staves with a gold rim and a white top, the tub a performer steps on to. It travels empty and stacks with the tubs.
Tall Circus Pedestal (Travelling Circus and Big Top)
The same pedestal at 1.1 m, the taller step of a pair. Left empty on purpose: this pack has no animals in it, and an empty pedestal is what stands in the ring between acts.
Stack of Circus Tubs (Travelling Circus and Big Top)
Four painted acrobat tubs, three nested into a 1.2 m stack and one stood beside it, in blue, red and gold with gilt rims. Static prop for dressing a ring or a wagon tail.
AnimatedClown Car (Travelling Circus and Big Top)
A 2.9 m red clown car on four gold spoked wheels: a cut down tub with a gilt bonnet, two lamps, a blue open cab under a white roof and a white door panel. The near door is a node on its hinge and each wheel is a node on its axle.
Pair of Circus Stilts (Travelling Circus and Big Top)
A pair of 1.9 m red stilts with timber foot rests and gold caps, leaning together on a board the way they are parked between shows. Static prop.
AnimatedCircus Cage Wagon (Travelling Circus and Big Top)
A 3.4 m barred cage wagon on four gold spoked wheels, with a red roof, a timber floor and a drawbar. It travels empty: this pack has no animals in it and the cage is here as a prop and a parade piece. The tail door is a node on its hinge stile.
Strongman Weight (Travelling Circus and Big Top)
A 1.9 m strongman dumbbell: two 840 mm black spheres on a banded bar, resting in a sawdust scrape. The faces of the spheres are left blank, so a project can letter its own weight on them.
AnimatedMagician's Cabinet (Travelling Circus and Big Top)
A 2.1 m blue conjuring cabinet on a black plinth, with a gilt cornice, a red spire and a red front door with a gold panel. The door is one node on its hinge stile; the cabinet is empty inside.
Dressing Room Mirror (Travelling Circus and Big Top)
A 2 m tilting dressing mirror in a gilt frame on two turned timber posts, the mirror drawn as a flat steel face rather than a reflection. Static: the frame does not tilt in the file.
Rolled Ring Carpet (Travelling Circus and Big Top)
A 2.4 m roll of red ring carpet with two gold binding straps and a white core, lying where it was dropped off the wagon. Static prop.
AnimatedCircus Travel Trunk (Travelling Circus and Big Top)
A 1.05 m banded timber trunk with steel corners, gilt handles and a red lid hinged along its back edge. The lid is one node on the hinge line, so it opens without the body moving.
AnimatedCircus Travel Crate (Travelling Circus and Big Top)
A 0.9 m square boarded crate with two banded straps and a plain white panel on each band, for props in transit. The lid is one node hinged along the back edge and the panels are blank.
Rigging Sledgehammer (Travelling Circus and Big Top)
The 1 m sledgehammer the stakes are driven with: an ash shaft and a steel head, leaning where it was left in the churned ground. Static prop.
AnimatedCircus Living Wagon (Travelling Circus and Big Top)
A 5.4 m panelled living wagon on four spoked wheels: white boarding with red rails and blue panels, a red roof with two vents, a glazed tail door on its hinge stile and folding steps under it.
AnimatedCircus Living Wagon, Blue Livery (Travelling Circus and Big Top)
The same living wagon painted the other way round, blue boarding with gold rails and red panels, so a row of parked wagons is not one repeated model. The geometry and the rig are unchanged.
AnimatedCircus Tractor Unit (Travelling Circus and Big Top)
A 5.6 m flat nosed tractor unit in circus red with a white roof pod, a gold grille and a black ballast deck behind the cab. Both cab doors are nodes on their hinge stiles and all four wheels are nodes on their axles.
AnimatedGenerator Trailer (Travelling Circus and Big Top)
A 3.2 m towed generator: a gold acoustic canopy on a black chassis with louvre panels, an exhaust stack, a drawbar and a jockey leg. The service hatch on the tail is one node hinged on its head rail.
AnimatedCable Drum (Travelling Circus and Big Top)
A 1.24 m timber cable drum wound with black power cable on a steel spindle, with a chock board behind it. The drum is one node on its own axis, so it rolls without the chock moving.
AnimatedShowground Flood Lamp (Travelling Circus and Big Top)
A 3.3 m flood lamp on a braced tripod mast: a twin steel head with a gold lens face on a yoke. The head is one node on the yoke pin and tilts; the lamp casts no light of its own, since the file carries no light sources.
Festoon Light Run (Travelling Circus and Big Top)
A 6 m run of festoon lighting: nine gold bulbs on a sagging cord between two braced timber poles. Static, because a cord that swings is not one rigid body, and the bulbs carry no light sources.
Bunting Run (Travelling Circus and Big Top)
A 6 m run of bunting between two timber poles: twelve red, gold and blue pennants on a sagging cord. Static, and the flags are flat triangles with no wording on them.
Hay Bale (Travelling Circus and Big Top)
A 1 m rectangular straw bale with two white binding strings, for bedding a yard or blocking a gap in a fence line. Static prop that stacks on itself.
Round Hay Bale (Travelling Circus and Big Top)
A 1.24 m round bale wrapped with three white bands, lying on its side. Functional variant of the rectangular bale, for the corner of a yard rather than a stack.
AnimatedPopcorn Cart (Travelling Circus and Big Top)
A 1.5 m handcart on two spoked wheels with a glazed warming case, a gilt frame, a red conical canopy and a push handle. The serving hatch is one node on its head rail and both wheels are nodes on the axle.
AnimatedCandyfloss Stand (Travelling Circus and Big Top)
A 1.7 m candyfloss stall: a blue counter with a steel spinning bowl in its guard ring, two sticks of floss on the shelf, a red scalloped canopy on gilt posts and a blank sign board. The bowl is one node and spins.
Circus Pitched for the Night (Travelling Circus and Big Top)
A 40 x 32 m circus ground with the big top up: fourteen red and white canvas bays under a striped cone, skirted with scalloped valance, guyed down and staked, with the ring, its sawdust, three banks of tiered seating and two ringside boxes inside it. In front, a fenced field...
Similar packs
182 modelsModular Survival Base Builder
A 180-piece modular base builder: foundations, floors, walls with doors and windows, roofs, stairs and ramps in timber, log, wattle, corrugated and rubble finishes, all snapping to one grid.
AI used in 182 of 182 files · Claude Fable 5.1
80 modelsModular Spaceships and Space Fleet
Original socketed hulls with modular equipment, station structures, utility craft and debris.
AI used in 80 of 80 files · Claude Fable 5.1
60 modelsSpace Station and Docking Bays
A near-future modular orbital station: pressurised modules on a hatch grid, truss and power structure, docking hardware, robotics, visiting free-flyers and interior fittings.
AI used in 60 of 60 files · Claude Fable 5.1
43 modelsSelf Storage Facility and Loading Bay
Storage units with lifting roller shutters, a ported corridor and mezzanine kit, a loading dock, a box van, trolleys and pallet gear, plus the site office, barrier, fencing and floodlights: everything a modern self storage facility and its loading bay needs.
AI used in 43 of 43 files · Claude Opus 5
53 modelsTattoo and Piercing Studio
A realistic tattoo studio: two artists booths of chair, work light, tray, machine and drawers behind ported flash art and divider panels, a sterile area and piercing bay, and a reception and waiting front, on modular floor, wall and door bays.
AI used in 53 of 53 files · Claude Opus 5
54 modelsMotorway Services and Truck Park
A complete motorway service area: a modular amenity building with its food court, shop and concourse fittings, a marked car park with charging bays and lorry bays, the yard behind it, and the slip road, gantry and signage that lead in.
AI used in 54 of 54 files · Claude Opus 5
89 modelsModular Greybox Architecture Kit
Neutral 4 m grid prototyping kit: floors, walls, stairs, ramps, catwalks, animated doors, roofs, structure and blockout references.
AI used in 89 of 89 files · Claude Fable 5.1
107 modelsHorse Stables and Equestrian Yard
Low-poly horses, modular stable bays, paddock fencing, arenas, show jumps, tack and yard equipment.
AI used in 107 of 107 files · Claude Fable 5.1
80 modelsHospital Wards and Clinic Operations
Management-simulation hospital fit-out: ward, diagnostics, theatre, pharmacy, reception, staff, ambulance bay and a modular partition kit in one bright eight-colour palette.
AI used in 80 of 80 files · Claude Fable 5.1
49 modelsSpaceship Interior Deck Kit
Modular spaceship interiors: corridors, junctions, sliding bulkhead doors, an airlock, room shells for a bridge, engineering, crew quarters, medbay and cargo bay, and the furniture that fills them.
AI used in 49 of 49 files · Claude Fable 5.1