3DAssets.dev

Loading model

About

Original CC0 boarding kennels, cattery and rescue centre library: the facility, not the animals, which the catalogue's own cat, dog and pet packs already supply. The kennel side is a ported bay module 1.5 m and 2.25 m wide with a block dividing wall, a raised sleeping platform, a bed shelf and a pop hatch through to the run, the same bay made up for a boarder, a standalone dividing wall panel, a mesh gate with a drop latch, resin floor and drainage channel tiles, outdoor run panels and a run gate, a clear run roof section, a gate name card holder, a water bowl bracket, a feed bowl, a pile of vet bedding, a folded blanket stack, a raised feeding stand and a toy basket. The cattery adds a ported pen module with a three step shelf ladder and a sleeping box, a glazed pen door, a cat flap panel between pen and run, a walkway shelf set, a scratching post, a litter tray with its scoop, a cat carrier in two sizes, a heat pad, a hide box and a free standing exercise wheel. The service and rescue side carries a food prep counter with an inset sink, a bank of three feed bins with scoops, a fridge and freezer, a laundry washer and dryer stack, a bedding trolley on castors, a cleaning station with a hose reel, a pedal waste bin and a clinical waste bin, an isolation pen with its warning plate and foot tray, a weighing platform, a medicine cabinet, a record clipboard rack, a reception desk with a screen, a waiting bench, an adoption noticeboard, paddock fence panels with a gate, an agility step and a play tunnel. Named pivoted nodes carry rigid node-transform clips only: kennel gates, run gates, cattery pen doors, the isolation door and the paddock gate swing, the pop hatches and the cat flap lift, the carrier, fridge, freezer, washer, dryer and cabinet doors open and close, feed bin and pedal bin lids lift, the exercise wheel and the hose reel spin and the bedding trolley castors roll. Welded mesh infill, bedding, litter, water, hose runs and cables are modelled solid and never move, because none of them is reachable with one rigid node transform. No kennel, cattery, charity or pet brand names, badges or artwork anywhere: every card, label and sign is blank.

Files load directly from the CDN. Choose the pieces you need. Colliders, navigation and gameplay scripts are supplied by your game.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the pack.

Use the “Boarding Kennels and Cattery” pack in my project.

Manifest (JSON, every model with its CDN URL): https://3dassets.dev/api/v1/packs/boarding-kennels-and-cattery
Starter scene (one GLB with every piece placed): https://cdn.3dassets.dev/assets/35575/v1/model.glb
Pack page: https://3dassets.dev/packs/boarding-kennels-and-cattery
Description: Kennel bays with opening gates and pop hatches, roofed outdoor runs, cattery pens with shelf ladders and cat flaps, food prep, feed bins, laundry, cleaning and isolation, plus reception, an adoption board and a fenced exercise paddock. No animals: the facility that houses them.

- 48 GLB models, 2.2 MB in total
- Units: metres, +Y up, shared scale and palette across the pack
- Licence: CC0 1.0 Universal (no attribution required)
- Loading: three.js GLTFLoader; no additional decoders required. Load models individually from the manifest, or the starter scene as one file.

Also available as a JSON manifest or via the MCP server.

Common questions

How do I use Boarding Kennels and Cattery with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the pack and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Download the starter scene with the button to get every piece already placed as one .glb, or take individual models from the grid below, each with its own download and CDN URL. The JSON manifest linked above lists every file with its URL and size, which is what an AI agent uses to pull the pack into a project. Connect your agent to the MCP server and it can do all of that by itself.

MCP server setupAPI reference

Which game engines and tools can I use Boarding Kennels and Cattery with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. Every model in the pack is a self-contained binary glTF (.glb) with textures embedded, and so is the starter scene, so each is one file to import and no plugin, converter or decoder to install first.
How do I import this pack into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use Boarding Kennels and Cattery in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every pack on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The starter scene, one .glb with every piece placed, has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I have to download the whole pack?
No. Every model in the pack is a separate published asset with its own download and CDN URL, so you can take one prop or the entire set. The starter scene is the one-file option for people who want everything placed at once.
Do the models in Boarding Kennels and Cattery fit together?
That is the point of a pack. The members are built together to one real-world scale with consistent pivots and a shared palette and level of detail, so a building, a vehicle and a prop from the same pack sit correctly in one scene without rescaling or re-texturing.

Game kit

Boarding Kennels and Cattery

Kennel bays with opening gates and pop hatches, roofed outdoor runs, cattery pens with shelf ladders and cat flaps, food prep, feed bins, laundry, cleaning and isolation, plus reception, an adoption board and a fenced exercise paddock. No animals: the facility that houses them.

Download pack · 909.1 KB

One GLB with every piece placed in a starter scene. Each model is also below on its own.

View demo

Everything in this pack

Kennel resin floor tile, 1.5 m (Boarding Kennels and Cattery)

Kennel resin floor tile, 1.5 m (Boarding Kennels and Cattery)

Grey resin floor module 1.5 m square and 100 mm thick with a saw cut joint along two edges, a blue walkway line across the middle and edge ports on all four sides, laid so its top face is the walking surface.

@3dassets48 tris
Kennel drainage channel floor tile, 1.5 m (Boarding Kennels and Cattery)

Kennel drainage channel floor tile, 1.5 m (Boarding Kennels and Cattery)

The same 1.5 m resin floor module with a galvanised slot drain running across it on eight charcoal grating bars and an orange keep clear strip beside it, for the wash down channel in front of a run of kennel gates.

@3dassets144 tris
Kennel bay module with sleeping platform, 1.5 m (Boarding Kennels and Cattery)Animated

Kennel bay module with sleeping platform, 1.5 m (Boarding Kennels and Cattery)

Boarding kennel bay 1.5 m wide, 2 m deep and 2.1 m to the roof: a block dividing wall with a stainless kick sheet, a back wall with a hinged pop hatch through to the outdoor run, a raised sleeping platform with a blue pad, a bed shelf on brackets and an orange threshold.

@3dassets324 tris
Kennel bay module, wide, 2.25 m (Boarding Kennels and Cattery)Animated

Kennel bay module, wide, 2.25 m (Boarding Kennels and Cattery)

The same boarding kennel bay at 2.25 m wide, the size a pair of dogs from one household shares. Identical depth, roof height, dividing wall, pop hatch, platform and bed shelf, ported on its own half width so it laces into the same run of bays.

@3dassets324 tris
Kennel bay module, made up for a stay (Boarding Kennels and Cattery)Animated

Kennel bay module, made up for a stay (Boarding Kennels and Cattery)

The same 1.5 m kennel bay made up for a boarder: a folded blanket and a vet bed on the sleeping platform, a stainless feed bowl and a water bowl on a mat, a rope toy on the floor and a towel over the bed shelf, for the open bay a scene shows the inside of.

@3dassets884 tris
Kennel dividing wall panel, 2 m (Boarding Kennels and Cattery)

Kennel dividing wall panel, 2 m (Boarding Kennels and Cattery)

Standalone painted block wall 2 m deep, 2.1 m tall and 120 mm thick with a charcoal capping rail, a stainless kick sheet on both faces and a blue band at hand height, for capping the end of a run of bays or pens.

@3dassets48 tris
Kennel gate with latch (Boarding Kennels and Cattery)Animated

Kennel gate with latch (Boarding Kennels and Cattery)

Galvanised mesh kennel gate 1.32 m wide and 1.75 m tall: a welded frame with a mid rail and mesh infill, a blue kick panel across the bottom, two hinges on a steel stile post and a charcoal drop latch with a thumb lever, swinging out into the corridor.

@3dassets376 tris
Outdoor run mesh panel, 1.5 m (Boarding Kennels and Cattery)

Outdoor run mesh panel, 1.5 m (Boarding Kennels and Cattery)

Galvanised run panel 1.5 m wide and 1.85 m tall: two square posts on bolted feet with charcoal caps, a top and bottom rail, welded mesh infill on a 150 mm pitch and an orange kick strip along the bottom, with edge ports for laying a run of them.

@3dassets324 tris
Outdoor run gate panel, 1.5 m (Boarding Kennels and Cattery)Animated

Outdoor run gate panel, 1.5 m (Boarding Kennels and Cattery)

The same 1.5 m run panel built as a gate: a mesh leaf on two hinges with an orange kick panel, a mid rail and a charcoal drop latch, hung in the posted frame and ported the same way so it laces into a run of panels.

@3dassets436 tris
Outdoor run roof section, 1.5 m (Boarding Kennels and Cattery)

Outdoor run roof section, 1.5 m (Boarding Kennels and Cattery)

Clear roof module 1.5 m square: a galvanised frame with two purlins, a translucent sheet over it and a blue fascia along the front edge, ported on both sides so sections lay end to end over a row of runs.

@3dassets96 tris
Kennel gate name card holder (Boarding Kennels and Cattery)

Kennel gate name card holder (Boarding Kennels and Cattery)

Stainless card holder 200 mm wide that hooks over a gate rail: a folded backplate, a clear retainer and a blank card with a blue header and two ruled lines, so a developer can letter it or leave it as it is.

@3dassets84 tris
Water bowl bracket for a kennel gate (Boarding Kennels and Cattery)

Water bowl bracket for a kennel gate (Boarding Kennels and Cattery)

Galvanised bracket that hooks over kennel mesh and holds a blue water bowl in a ring 300 mm off the ground, with two hooks, a folded backplate and a stainless bowl clip, so the bowl cannot be tipped over.

@3dassets300 tris
Stainless feed bowl on a mat (Boarding Kennels and Cattery)

Stainless feed bowl on a mat (Boarding Kennels and Cattery)

Stainless steel feed bowl 290 mm across on a black rubber anti slip mat, with a blue rim band and a cream fill, the bowl a kennel puts down twice a day.

@3dassets320 tris
Pile of vet bedding (Boarding Kennels and Cattery)

Pile of vet bedding (Boarding Kennels and Cattery)

Four fleece vet beds folded and stacked 380 mm high in blue, cream and green, the pile that sits in a kennel laundry or on a bedding trolley waiting to go out to the bays.

@3dassets456 tris
Folded blanket stack (Boarding Kennels and Cattery)

Folded blanket stack (Boarding Kennels and Cattery)

Three laundered blankets folded into a 400 mm stack in green, blue and cream with the fold lines modelled, for a bed shelf, a cattery pen or the top of the laundry stack.

@3dassets360 tris
Raised feeding stand with two bowls (Boarding Kennels and Cattery)

Raised feeding stand with two bowls (Boarding Kennels and Cattery)

Timber feeding stand 560 mm wide on four steel legs, holding a stainless bowl and a blue bowl at 350 mm, with a blue front rail and rubber feet, the height a large dog is fed at.

@3dassets276 tris
Toy basket (Boarding Kennels and Cattery)

Toy basket (Boarding Kennels and Cattery)

Orange moulded basket 500 mm across holding the day's toys: two rubber balls, a knotted rope, a ring and a soft cube, the basket that lives by the kennel corridor door.

@3dassets720 tris
Cattery pen module with shelf ladder, 1.5 m (Boarding Kennels and Cattery)

Cattery pen module with shelf ladder, 1.5 m (Boarding Kennels and Cattery)

Cattery pen 1.5 m wide, 2 m deep and 2.1 m to the roof: a painted block dividing wall on its left carrying a three step shelf ladder with green pads and a ramp, a timber sleeping box on the top shelf, a green threshold under the door head and an open back onto the run.

@3dassets480 tris
Cattery pen door with viewing panel (Boarding Kennels and Cattery)Animated

Cattery pen door with viewing panel (Boarding Kennels and Cattery)

Cattery pen door 1.32 m wide and 1.9 m tall: a steel frame with mesh over the top, a glazed viewing panel at eye level, a green lower panel, a stainless handle and a safety catch, hung on a stile post and swinging out into the corridor.

@3dassets340 tris
Cat flap panel between pen and run, 1.5 m (Boarding Kennels and Cattery)Animated

Cat flap panel between pen and run, 1.5 m (Boarding Kennels and Cattery)

Painted block panel 1.5 m wide and 2.1 m tall with a framed cat flap through the bottom: a stainless surround, a cream flap on a head hinge with a green kick bar, a green band at hand height and run ports on both edges.

@3dassets120 tris
Cat walkway shelf set (Boarding Kennels and Cattery)

Cat walkway shelf set (Boarding Kennels and Cattery)

Four timber walkway shelves with green carpet pads on folded steel brackets, stepped 1.4 m across a pen wall and 1 m up it, the climbing route a cattery gives a cat instead of floor space.

@3dassets288 tris
Scratching post with platform (Boarding Kennels and Cattery)

Scratching post with platform (Boarding Kennels and Cattery)

Sisal scratching post 800 mm tall on a timber base: a bound column in four wound bands, a carpeted platform on top in green and a blue ball on a cord hanging off the edge, the one piece of furniture every cattery pen gets.

@3dassets588 tris
Litter tray with scoop (Boarding Kennels and Cattery)

Litter tray with scoop (Boarding Kennels and Cattery)

Cream moulded litter tray 500 mm by 380 mm with a green clip on rim, a bed of litter and a blue scoop resting across one corner, the tray a cattery pen and an isolation pen both carry.

@3dassets144 tris
Cat carrier (Boarding Kennels and Cattery)Animated

Cat carrier (Boarding Kennels and Cattery)

Moulded cat carrier 460 mm long: a cream shell with a blue lid, an arch handle, moulded side vents and a barred charcoal door on the front with a blue catch, the carrier an owner hands over at reception.

@3dassets636 tris
Cat carrier, large (Boarding Kennels and Cattery)Animated

Cat carrier, large (Boarding Kennels and Cattery)

The same carrier at 600 mm, the size a cattery keeps for a big cat or a pair of kittens travelling together, with the same lid, handle, vents and opening barred door.

@3dassets636 tris
Heat pad with lead (Boarding Kennels and Cattery)

Heat pad with lead (Boarding Kennels and Cattery)

Blue covered heat pad 440 mm by 340 mm with a cream fleece top, a charcoal lead running off one corner and a plug on the end, the pad a cattery puts under an older cat's bedding.

@3dassets368 tris
Hide box (Boarding Kennels and Cattery)

Hide box (Boarding Kennels and Cattery)

Timber hide box 480 mm wide with a round entrance, an overhanging lid and a green cushion inside, the quiet corner a nervous cat is given in a pen or an isolation unit.

@3dassets240 tris
Cat exercise wheel (Boarding Kennels and Cattery)Animated

Cat exercise wheel (Boarding Kennels and Cattery)

Free standing cat wheel 1.24 m across: a cream running drum on two charcoal rollers in a weighted base, with blue side rims and a green tread band, turning on its axle.

@3dassets584 tris
Food prep counter with sink (Boarding Kennels and Cattery)Animated

Food prep counter with sink (Boarding Kennels and Cattery)

Stainless topped food prep run 1.8 m wide with an inset sink and a mixer tap, a raised upstand, two blue cupboard doors on a cream carcass, a recessed charcoal plinth and a chopping board and jug on the drainer.

@3dassets360 tris
Feed bin bank with scoops (Boarding Kennels and Cattery)Animated

Feed bin bank with scoops (Boarding Kennels and Cattery)

Three wheeled feed bins side by side in orange, blue and green on a charcoal base rail, each with a lifting lid, a blank cream label and a cream scoop resting on top, the bank a kennel measures the day's feed from.

@3dassets912 tris
Kennel fridge and freezer (Boarding Kennels and Cattery)Animated

Kennel fridge and freezer (Boarding Kennels and Cattery)

Cream fridge over freezer 1.76 m tall with two doors on steel bar handles, a blue band across the fridge door and a green one across the freezer, charcoal feet and a stainless tray of covered dishes on top.

@3dassets768 tris
Laundry washer and dryer stack (Boarding Kennels and Cattery)Animated

Laundry washer and dryer stack (Boarding Kennels and Cattery)

Commercial washer with a dryer stacked on it, 1.76 m tall: cream cabinets with blue control panels, round glazed doors on charcoal rims, a stainless plinth and a folded blanket on top.

@3dassets1.5k tris
Bedding trolley (Boarding Kennels and Cattery)Animated

Bedding trolley (Boarding Kennels and Cattery)

Two shelf bedding trolley on four castors: a charcoal tube frame with a blue push handle, cream shelves and folded vet beds and blankets in blue, green and cream stacked on both levels.

@3dassets1.2k tris
Cleaning station with hose reel (Boarding Kennels and Cattery)Animated

Cleaning station with hose reel (Boarding Kennels and Cattery)

Wash down station on a stainless back panel: a blue hose reel that turns, a nozzle on its hook, a squeegee and a yard brush on hangers, an orange bucket and a blank blue method plate.

@3dassets732 tris
Pedal waste bin (Boarding Kennels and Cattery)Animated

Pedal waste bin (Boarding Kennels and Cattery)

Cream pedal bin 700 mm tall with a blue band, a charcoal lift lid on a back hinge, a foot pedal and a linkage rod, the general waste bin a kennel corridor keeps by the prep counter.

@3dassets404 tris
Clinical waste bin (Boarding Kennels and Cattery)Animated

Clinical waste bin (Boarding Kennels and Cattery)

The same pedal bin in red with a charcoal band and a blank warning plate, the closed clinical waste bin an isolation pen and a treatment area both need.

@3dassets452 tris
Isolation pen module with warning sign (Boarding Kennels and Cattery)Animated

Isolation pen module with warning sign (Boarding Kennels and Cattery)

Isolation pen on the same 1.5 m grid, set apart from the blocks: the bay shell with a solid cream door and a glazed viewport, a red warning plate over the head beam, a red band on the dividing wall, a disinfectant foot tray at the threshold and a hand gel dispenser by the jamb.

@3dassets652 tris
Weighing scale platform (Boarding Kennels and Cattery)

Weighing scale platform (Boarding Kennels and Cattery)

Low stainless weighing platform 900 mm by 700 mm with a rubber non slip mat, a ramp on each side, a charcoal display head on a post with a blue fascia and a blank screen, the scale a boarder steps on at the door.

@3dassets148 tris
Medicine cabinet (Boarding Kennels and Cattery)Animated

Medicine cabinet (Boarding Kennels and Cattery)

Wall medicine cabinet 700 mm wide with two blue doors on steel handles, a green band across them, a keyed lock and a cream carcass, the locked cupboard a kennel keeps its treatments in.

@3dassets136 tris
Record clipboard rack (Boarding Kennels and Cattery)

Record clipboard rack (Boarding Kennels and Cattery)

Steel rail rack holding four clipboards of blank record sheets, each with a coloured clip in blue, green, orange and red, the daily feed and medication sheets a kennel hangs outside the bays.

@3dassets324 tris
Reception desk with screen (Boarding Kennels and Cattery)

Reception desk with screen (Boarding Kennels and Cattery)

Boarding reception desk 1.9 m wide: a timber carcass with a blue front panel, a raised transaction shelf on steel posts, a screen and keyboard on the working top, a leaflet stand, a blank booking card and a stainless bell.

@3dassets576 tris
Reception waiting bench (Boarding Kennels and Cattery)

Reception waiting bench (Boarding Kennels and Cattery)

Timber slatted bench 1.5 m long on a steel frame with blue end panels and a back of two slats, the bench owners wait on while a boarder is checked in.

@3dassets168 tris
Adoption noticeboard (Boarding Kennels and Cattery)

Adoption noticeboard (Boarding Kennels and Cattery)

Free standing noticeboard 1.7 m wide on two steel posts: a cream board in a blue frame with a green header band and eight blank cards pinned to it in orange, blue, green and cream, each with modelled rule lines and no wording.

@3dassets540 tris
Exercise paddock fence panel, 1.5 m (Boarding Kennels and Cattery)

Exercise paddock fence panel, 1.5 m (Boarding Kennels and Cattery)

Timber post and rail paddock panel 1.5 m wide and 1.25 m tall with three rails, galvanised mesh behind them on a 180 mm pitch, charcoal post caps and bolted feet, ported on both edges so panels run round a paddock.

@3dassets264 tris
Exercise paddock gate, 1.5 m (Boarding Kennels and Cattery)Animated

Exercise paddock gate, 1.5 m (Boarding Kennels and Cattery)

The same 1.5 m paddock panel built as a gate: a braced timber leaf with mesh behind it, two charcoal hinges, a drop latch and a blue marker plate, hung between the posts and ported the same way.

@3dassets352 tris
Paddock agility step (Boarding Kennels and Cattery)

Paddock agility step (Boarding Kennels and Cattery)

Two tier agility step 900 mm wide in blue and orange with cream non slip treads and charcoal edge trims, the low block a kennel uses to exercise a boarder in the paddock.

@3dassets72 tris
Paddock agility tunnel (Boarding Kennels and Cattery)

Paddock agility tunnel (Boarding Kennels and Cattery)

Open ended play tunnel 1.6 m long and 840 mm across, drawn inside and out so it reads as a hole, with six blue and orange hoop rings and charcoal ground anchors at each end.

@3dassets664 tris
Boarding kennels, cattery and rescue centre (Boarding Kennels and Cattery)

Boarding kennels, cattery and rescue centre (Boarding Kennels and Cattery)

A working boarding kennels 16 m by 12 m, laid on the pack's own grey resin floor with the wash down channel running in front of the blocks. The kennel block is five bays with block dividing walls: three with their mesh gates closed on blue kick panels, name cards in their...

@3dassets19.6k tris

Similar packs

Chess Set and Board assembled scene11 models

Chess Set and Board

A complete chess set: six turned and sculpted pieces, a walnut tournament board, an analogue chess clock, a storage case and a score pad, plus the full starting position.

AI used in 11 of 11 files · Claude Fable 5.1

768.8 KB totalStarter scene includedCC0 1.0 Universal
Board Game Pieces, Dice and Tokens assembled scene48 models

Board Game Pieces, Dice and Tokens

A full polyhedral dice set, meeples and pawns, resource and objective tokens, hex and route tiles, card stands and decks, dice towers, trays, counters and markers for tabletop and board games.

AI used in 48 of 48 files · Claude Fable 5.1

878.6 KB totalStarter scene includedCC0 1.0 Universal
Space Station and Docking Bays assembled scene60 models

Space Station and Docking Bays

A near-future modular orbital station: pressurised modules on a hatch grid, truss and power structure, docking hardware, robotics, visiting free-flyers and interior fittings.

AI used in 60 of 60 files · Claude Fable 5.1

12.1 MB totalStarter scene includedCC0 1.0 Universal
Self Storage Facility and Loading Bay assembled scene43 models

Self Storage Facility and Loading Bay

Storage units with lifting roller shutters, a ported corridor and mezzanine kit, a loading dock, a box van, trolleys and pallet gear, plus the site office, barrier, fencing and floodlights: everything a modern self storage facility and its loading bay needs.

AI used in 43 of 43 files · Claude Opus 5

2.3 MB totalStarter scene includedCC0 1.0 Universal
Tennis Club and Courts assembled scene46 models

Tennis Club and Courts

A complete tennis club in a kit: court surface tiles in hard court blue and clay, the painted line set, a net that sags on its posts, fencing with a gate and windbreaks, rackets, balls, a ball machine, an umpire chair and a clubhouse of 4 m bays under a pitched roof.

AI used in 46 of 46 files · Claude Opus 5

1.7 MB totalStarter scene includedCC0 1.0 Universal
Indoor Market Hall and Traders assembled scene53 models

Indoor Market Hall and Traders

A Victorian covered market hall: cast iron columns, glazed roof bays, brick walls and paving on one 4 m grid, lock up units with roller shutters, open stalls with striped canopies, and the mixed goods, dressing and barrows of a hall of traders.

AI used in 53 of 53 files · Claude Opus 5

10.3 MB totalStarter scene includedCC0 1.0 Universal
Clinic and Veterinary Practice assembled scene121 models

Clinic and Veterinary Practice

A realistic primary care clinic and small animal veterinary practice: reception, consulting, treatment, minor procedures, dispensing, veterinary prep, kennels and runs.

AI used in 121 of 121 files · Claude Fable 5.1

19.1 MB totalStarter scene includedCC0 1.0 Universal
Garden Centre and Florist assembled scene100 models

Garden Centre and Florist

A modern retail horticulture library: glasshouse bays, benching, Danish trolleys, irrigation and potting kit, empty pots and bagged compost, a florist workroom, tills and an outdoor hard landscaping yard.

AI used in 100 of 100 files · Claude Fable 5.1

18.4 MB totalStarter scene includedCC0 1.0 Universal
Pixel Modern Supermarket assembled scene89 models

Pixel Modern Supermarket

87 original pixel art 3D models of a modern supermarket: a 2 m bay store shell, stocked gondola runs, service counters, chillers, the checkout line, the stock room, vehicles and posed figures.

AI used in 89 of 89 files · Claude Fable 5.1

4.1 MB totalStarter scene includedCC0 1.0 Universal
Wild West Frontier Town assembled scene40 models

Wild West Frontier Town

A frontier main street as a 3.2 m kit and the saloon behind it as a room: six false front facade bays, boardwalk, porch roofs and balconies, the church, jail, water tower and windmill, and a saloon interior with batwing doors and a piano.

AI used in 40 of 40 files · Claude Fable 5.1

3.6 MB totalStarter scene includedCC0 1.0 Universal