3DAssets.dev

Loading model

About

A working boarding kennels 16 m by 12 m, laid on the pack's own grey resin floor with the wash down channel running in front of the blocks. The kennel block is five bays with block dividing walls: three with their mesh gates closed on blue kick panels, name cards in their holders and water bowls on their brackets, one made up for a boarder with vet bedding, bowls and a rope toy, and the wide bay standing open with a bedding pile, a raised feeding stand and a feed bowl. Behind them the outdoor runs are divided panel by panel, gated at one end and roofed with clear sections. The cattery is three pens on the same grid with their shelf ladders, sleeping boxes, a walkway shelf set, a scratching post, a litter tray and a heat pad, their doors glazed at eye level, their backs closed by cat flap panels onto a second roofed run with the hide box and the exercise wheel in it. The service corridor between the blocks holds the food prep counter with its sink, the three feed bins with their scoops, the fridge and freezer, the laundry stack, the cleaning station with its hose reel, the bedding trolley, the weighing platform, the waste and clinical bins, with the medicine cabinet and the record clipboard rack facing each other across it. The isolation pen stands apart at the front left behind its red warning plate and foot tray, and reception holds the desk with its screen, the waiting bench, the adoption noticeboard and a toy basket. The fenced exercise paddock at the front right has its gate in the front run and the agility step and tunnel inside it. No animals are modelled: the catalogue's own cat, dog and pet packs supply those.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the asset.

Use the “Boarding kennels, cattery and rescue centre (Boarding Kennels and Cattery)” asset in my project.

Model: https://cdn.3dassets.dev/assets/35575/v1/model.glb
Asset page: https://3dassets.dev/assets/boarding-kennels-and-cattery-boarding-ke-d2349ffd-starter-scene
Description: A working boarding kennels 16 m by 12 m, laid on the pack's own grey resin floor with the wash down channel running in front of the blocks. The kennel block is five bays with block dividing walls: three with their mesh gates closed on blue kick panels, name cards in their...

- Dimensions (X × Y × Z): 15.28 × 2.28 × 12.07 metres
- Triangles: 19.6k
- Animations: none
- Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/)
- Loading: Three.js GLTFLoader; no additional decoders required.

Also available as JSON, Markdown, or via the MCP server.

Import manually

Choose your framework, then copy the code into your project to load the asset.

import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'

const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/35575/v1/model.glb', (gltf) => {
  scene.add(gltf.scene)
})

Common questions

How do I use this model with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the model and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Three ways, from quickest to most automatic. Download the .glb with the button and drop it into your engine's asset folder, where it imports like any glTF file. Or skip the download: copy the three.js, React Three Fiber or model-viewer snippet under "Import manually", which loads the model straight from the CDN. Or connect your AI agent to the MCP server and ask for it by name, and it will find, fetch and place the model for you.

MCP server setupAPI reference

Which game engines and tools can I use this model with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. The model is a self-contained binary glTF (.glb) with textures embedded, so there is one file to import and no plugin, converter or decoder to install first.
How do I import this model into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use this model in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every model on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The .glb file has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I need Draco, Meshopt or KTX2 to load it?
No. The geometry is quantized with KHR_mesh_quantization and the textures are re-encoded to WebP, both of which three.js, Godot, Unity and Blender read natively, so a plain GLTFLoader is enough. There is nothing extra to configure and no decoder to ship with your bundle.

Boarding kennels, cattery and rescue centre (Boarding Kennels and Cattery)

A working boarding kennels 16 m by 12 m, laid on the pack's own grey resin floor with the wash down channel running in front of the blocks. The kennel block is five bays with block dividing walls: three with their mesh gates closed on blue kick panels, name cards in their...

Download asset · 909.1 KB

More in Environments & Scenes

Gaming Floor (Casino Floor and Back Rooms)

Gaming Floor (Casino Floor and Back Rooms)

Gaming floor demonstration: a pit of blackjack, roulette, craps and poker tables with dealer chairs and stools on patterned carpet, a slot bank and machine row beyond, a bar with back bar and lounge seating, rope stanchions marking the pit, and the cashier cage on the back...

@3dassets20.9k tris · 43 ↓
Working Fishing Harbor (Fishing Harbour and Boats)

Working Fishing Harbor (Fishing Harbour and Boats)

A complete miniature harbor with tackle shop, open boathouse, joined quay and piers, moored cabin launch, market, and fishing activity.

@3dassets46.3k tris · 42 ↓
Metro station with an island platform and units at both faces (Modern Rail and Metro Network)

Metro station with an island platform and units at both faces (Modern Rail and Metro Network)

A two track metro station: an island platform with canopies, seating, displays, a shelter, a gate line and an end ramp, slab track each side and a two car metro unit standing at each face, one with its doors open. A glazed lift shaft and a stair flight on the deck give access...

@3dassets22.5k tris · 42 ↓
Departures Concourse (Airport Terminal and Ground Operations)

Departures Concourse (Airport Terminal and Ground Operations)

A 32 by 28 metre departures concourse floored on the 4 m tile grid: a row of staffed check-in desks with self-service kiosks and bag drop units behind a managed queue, three security lanes with tray return trolleys, a gate lounge of beam seating around a gate desk, retail and...

@3dassets12.6k tris · 39 ↓
Lunar Colony Overview (Moon Base Colony and Lunar Rovers)

Lunar Colony Overview (Moon Base Colony and Lunar Rovers)

A working surface base: two tunnel junctions link a crew habitat, an inflatable dome, an observation turret, a greenhouse, a medical module, a regolith shielded habitat, an airlock and a vehicle workshop, every mate made through the hab-port interface 2.4 m above the...

@3dassets71.3k tris · 39 ↓
Resort Base Area (Ski Resort and Snow Park)

Resort Base Area (Ski Resort and Snow Park)

Base area on a 40 by 48 m tile grid: lift drive terminal with queue maze and pass gates, a 12 m cable span with two hanging chairs, lodge hall with wing, rental shop with racks, ticket office, bus stop with shuttle, groomer and slope-side furniture. Static layout; no...

@3dassets10.3k tris · 38 ↓
Checkpoint to Safehouse (Zombie Quarantine Streets)

Checkpoint to Safehouse (Zombie Quarantine Streets)

A clear3m+ inspection route through a gate and canopy towards a braced safehouse, with separated triage and supplies.

@3dassets1.4k tris · 37 ↓
Working Airfield At Dusk (Aircraft Fleet and Airfield)

Working Airfield At Dusk (Aircraft Fleet and Airfield)

A whole general aviation airfield laid out tight as one place: a 70 metre lit runway with a threshold at each end, a parallel taxiway turning north into a twenty four bay apron, a hangar built from its arch modules and closed at both ends with a light single half out of the...

@3dassets327k tris · 33 ↓
Body to Finish Line (Car Factory Production Line)

Body to Finish Line (Car Factory Production Line)

A 48 by 18 m car assembly plant built from the hall kit: nine roof trusses on twenty two steel columns, a closed back wall and both end walls with a roller shutter, a window band and personnel doors, a deck and ridge lantern roof over the back half and a mezzanine walkway...

@3dassets146k tris · 18 ↓
Framing Cell and Press Feed (Car Factory Production Line)

Framing Cell and Press Feed (Car Factory Production Line)

A single 20 by 12 m body shop cell on the plant floor: seven skid conveyor sections carry a body in white on its carrier skid through the framing gate, three welding robots work it from inside a run of yellow guarding with an access gate, and the panel racks, blank stack and...

@3dassets50.6k tris · 12 ↓
Walled Market Quarter (Fantasy MMO City And Townsfolk)

Walled Market Quarter (Fantasy MMO City And Townsfolk)

A hand painted fantasy city quarter inside a forty eight metre circuit of curtain wall, with a wall walk on corbels, arrow loops, four quoined corner towers, two round flanking towers, a postern in the west wall and the great gatehouse in the south wall, its portcullis and...

@3dassets303k tris · 11 ↓
Fortified forest outpost (FPS Survival Forest Outpost)

Fortified forest outpost (FPS Survival Forest Outpost)

A free survival game scene: a fortified scavenger outpost in dense conifer forest around a half derelict research station. A ring of timber palisade and chain link closes a 28 by 20 metre compound, with a two leaf palisade gate on the south track under a lit red lamp and...

@3dassets383k tris · 11 ↓

Similar assets

Kennel resin floor tile, 1.5 m (Boarding Kennels and Cattery)

Kennel resin floor tile, 1.5 m (Boarding Kennels and Cattery)

Grey resin floor module 1.5 m square and 100 mm thick with a saw cut joint along two edges, a blue walkway line across the middle and edge ports on all four sides, laid so its top face is the walking surface.

@3dassets48 tris
Kennel drainage channel floor tile, 1.5 m (Boarding Kennels and Cattery)

Kennel drainage channel floor tile, 1.5 m (Boarding Kennels and Cattery)

The same 1.5 m resin floor module with a galvanised slot drain running across it on eight charcoal grating bars and an orange keep clear strip beside it, for the wash down channel in front of a run of kennel gates.

@3dassets144 tris
Kennel bay module with sleeping platform, 1.5 m (Boarding Kennels and Cattery)Animated

Kennel bay module with sleeping platform, 1.5 m (Boarding Kennels and Cattery)

Boarding kennel bay 1.5 m wide, 2 m deep and 2.1 m to the roof: a block dividing wall with a stainless kick sheet, a back wall with a hinged pop hatch through to the outdoor run, a raised sleeping platform with a blue pad, a bed shelf on brackets and an orange threshold.

@3dassets324 tris
Kennel bay module, wide, 2.25 m (Boarding Kennels and Cattery)Animated

Kennel bay module, wide, 2.25 m (Boarding Kennels and Cattery)

The same boarding kennel bay at 2.25 m wide, the size a pair of dogs from one household shares. Identical depth, roof height, dividing wall, pop hatch, platform and bed shelf, ported on its own half width so it laces into the same run of bays.

@3dassets324 tris
Kennel bay module, made up for a stay (Boarding Kennels and Cattery)Animated

Kennel bay module, made up for a stay (Boarding Kennels and Cattery)

The same 1.5 m kennel bay made up for a boarder: a folded blanket and a vet bed on the sleeping platform, a stainless feed bowl and a water bowl on a mat, a rope toy on the floor and a towel over the bed shelf, for the open bay a scene shows the inside of.

@3dassets884 tris
Arena Floor Tile (Laser Tag Arena and Activity Centre)

Arena Floor Tile (Laser Tag Arena and Activity Centre)

A 2 m square arena floor tile 60 mm deep: a grey resin screed in a shallow tray, marked with a lime border line, a centre bar and a chevron in each corner, ported on all four edges so a whole arena floor is laid from repeats of one model.

@3dassets528 tris
Kennel gate with latch (Boarding Kennels and Cattery)Animated

Kennel gate with latch (Boarding Kennels and Cattery)

Galvanised mesh kennel gate 1.32 m wide and 1.75 m tall: a welded frame with a mid rail and mesh infill, a blue kick panel across the bottom, two hinges on a steel stile post and a charcoal drop latch with a thumb lever, swinging out into the corridor.

@3dassets376 tris
Water bowl bracket for a kennel gate (Boarding Kennels and Cattery)

Water bowl bracket for a kennel gate (Boarding Kennels and Cattery)

Galvanised bracket that hooks over kennel mesh and holds a blue water bowl in a ring 300 mm off the ground, with two hooks, a folded backplate and a stainless bowl clip, so the bowl cannot be tipped over.

@3dassets300 tris
Cattery pen module with shelf ladder, 1.5 m (Boarding Kennels and Cattery)

Cattery pen module with shelf ladder, 1.5 m (Boarding Kennels and Cattery)

Cattery pen 1.5 m wide, 2 m deep and 2.1 m to the roof: a painted block dividing wall on its left carrying a three step shelf ladder with green pads and a ramp, a timber sleeping box on the top shelf, a green threshold under the door head and an open back onto the run.

@3dassets480 tris
Cattery pen door with viewing panel (Boarding Kennels and Cattery)Animated

Cattery pen door with viewing panel (Boarding Kennels and Cattery)

Cattery pen door 1.32 m wide and 1.9 m tall: a steel frame with mesh over the top, a glazed viewing panel at eye level, a green lower panel, a stainless handle and a safety catch, hung on a stile post and swinging out into the corridor.

@3dassets340 tris
Laser Tag Centre (Laser Tag Arena and Activity Centre)

Laser Tag Centre (Laser Tag Arena and Activity Centre)

A working laser tag centre laid out from the pack's own kit on its own floor: a 14 by 12 m building of 2 m floor tiles, lime marked inside the arena and teal outside it. The arena is a closed 10.3 by 8.3 m bay of wall modules on corner posts, with shooting port panels, mirror...

@3dassets57.7k tris
Kennel dividing wall panel, 2 m (Boarding Kennels and Cattery)

Kennel dividing wall panel, 2 m (Boarding Kennels and Cattery)

Standalone painted block wall 2 m deep, 2.1 m tall and 120 mm thick with a charcoal capping rail, a stainless kick sheet on both faces and a blue band at hand height, for capping the end of a run of bays or pens.

@3dassets48 tris