Free models · Game-ready GLB
Assets
Every model here is a game-ready GLB that drops into three.js, Blender, Godot, Unity and Unreal, free to use in personal and commercial work without crediting anyone.
Files are binary glTF with embedded WebP textures and quantized geometry, which three.js reads natively and Blender, Godot and Unity import as they are, so nothing needs a Draco or KTX2 decoder. Each asset page carries a permanent CDN URL you can load straight from your code.
22,849 free GLB models
Hinged hatch cover (Space Station and Docking Bays)
A 2 m hatch cover assembly: a bolted seat ring with a sealed face and six latch blocks, and a domed insulated cover swung fully open on a named hinge node carried by two support links.
Transfer tunnel with hatch (Space Station and Docking Bays)
A 2 m square-section transfer vestibule with a clear 1.7 m bore between two hatch ports, a 1.5 m swing hatch standing open on a named hinge node with a viewing pane, interior rails and a wall control panel.
Docking target cross (Space Station and Docking Bays)
A 0.9 m docking alignment target: a bolted base plate on four braces carrying a framed board with a raised black cross and ring, and a centre standoff pin with a yellow cap for the approach camera.
Common berthing mechanism (Space Station and Docking Bays)
A 2.5 m passive berthing ring: a bolted flange with sixteen powered bolts, four capture latch housings with their striker plates, four alignment guides and a sealed hatch face.
Androgynous docking port (Space Station and Docking Bays)
A 2.1 m androgynous docking mechanism: a bolted base flange with a station hatch port at the rear, an active capture ring with three guide petals, four latch housings and a target patch.
Extended soft capture ring (Space Station and Docking Bays)
A 2 m soft capture ring shown extended on six linear actuators: a fixed base flange, telescoping struts with damper bodies, the capture ring with a yellow contact band and three alignment blocks.
EVA handrail run (Space Station and Docking Bays)
A 2.2 m external handrail run on a mounting strip: two yellow translation rails on machined standoffs, a base plate with a blanket patch and a marked worksite label.
External stowage platform (Space Station and Docking Bays)
A 3.2 by 2 m external stowage platform: a slatted deck on standoffs, four spare orbital replacement units under tie-down straps, a side bracket with a truss port, a grapple fixture and an EVA rail.
Truss rotary joint (Space Station and Docking Bays)
A 2.7 m truss rotary joint: two short truss stubs, fixed race housings and a 3 m drive ring with twelve trundle bearing blocks on a named rotating node, plus a routed power line.
Stowed radiator panel array (Space Station and Docking Bays)
The radiator retracted for launch or safing, with the three panels folded into a parallel stack on their hinge nodes above the pump bracket.
Deployed radiator panel array (Space Station and Docking Bays)
A deployed thermal radiator: a pump and rotary bracket on a truss port, a spine beam and three 3.4 by 2.6 m panels fanned on named hinge nodes with fluid line ribs.
Stowed solar array canister (Space Station and Docking Bays)
A 4.1 m launch-stowed array canister: the same rotating base, a mast canister and two folded blanket boxes clamped either side with yellow release latches and a grapple fixture.
Short connecting tunnel (Space Station and Docking Bays)
A 2.7 m pressurised connecting tunnel with hatch ports at both ends, a convoluted bellows mid-section, four external stiffener rods and translation rails on all four faces.
Deployed solar array wing (Space Station and Docking Bays)
An 11.5 m deployed photovoltaic wing: a rotating base canister on a named gimbal node, a lattice mast and two 9.2 by 3.3 m blankets with cell strips, edge battens and a tensioning bar.
Truss end cap (Space Station and Docking Bays)
A 2 m closed truss end: half bay, a plated bulkhead with four fluid couplings, an avionics box, a low-gain antenna mast and one truss port so a run can be terminated.
Truss bay segment with utilities (Space Station and Docking Bays)
The truss bay carrying a full utility fit: two orbital replacement unit boxes with gold covers and a routed fluid line loop between the longerons.
Truss bay segment (Space Station and Docking Bays)
A 4 m aluminium truss bay on a 2.4 m square section: four longerons, ribbed bulkhead frames, cross bracing, corner end fittings, a utility box, an EVA rail and a grapple fixture.
Service module with tankage (Space Station and Docking Bays)
A 7.4 m service module: forward hatch port, four external spherical propellant tanks on struts, a main engine bell, two reaction control pods and a nadir body radiator.
Expandable soft-goods habitat (Space Station and Docking Bays)
A 7.8 m expandable habitat: a lofted soft-goods shell scalloped by eight longitudinal restraint straps, rigid metal end bulkheads, an aft hatch port, four hoop straps and a grapple fixture.
Crew airlock module (Space Station and Docking Bays)
A 4.7 m crew airlock, 6.0 m overall with the hatch open: aft hatch to the station, a 1.4 m forward EVA hatch swung open on a named hinge node, two external high-pressure gas tanks, a nadir depress pump box and dense translation rails.
Cargo logistics module (Space Station and Docking Bays)
A 6.7 m pressurised logistics module: one forward berthing hatch, a blanked conical aft service section with four reaction control pods and two gas tanks, a deployed antenna and a grapple fixture.
Crew habitation module, gold blanket (Space Station and Docking Bays)
The habitation module finished with gold multi-layer insulation over the mid-section and dark stowage racks, for stations that mix blanket liveries across their pressurised elements.
Compact laboratory module (Space Station and Docking Bays)
A 7.2 m short-body laboratory module on the same hatch grid, with one pair of experiment canisters, a shorter radiator and fewer rail runs for tight station layouts.
Four-port station node (Space Station and Docking Bays)
A 3.6 m pressurised connecting node with forward, aft, port and starboard hatch ports on machined stubs, a zenith avionics box, grapple fixture, low-gain antenna and EVA translation rails.