Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,517 free GLB models
Gas bottle rack (Shipyard and Dry Dock)
A caged rack holding eight industrial gas bottles in two rows, chained back with a solid bar, on a forkable base with a blank hazard placard and a blue and red colour coded pair of manifolds.
AnimatedAir hose reel on a stand (Shipyard and Dry Dock)
A wall or floor standing hose reel wound with compressed air line, on a bolted bracket with a swivel inlet, a guide roller and a coupling hung on the frame. The reel turns.
AnimatedWelding cable reel on a stand (Shipyard and Dry Dock)
A steel drum of heavy welding cable on a braked A frame stand, with a slotted flange, a crank handle, a lead end on a stud and a blank rating plate. The drum turns on its stand.
AnimatedWelding bay screen (Shipyard and Dry Dock)
A three leaf welding screen 3.6 m wide and 2 m tall on castors: a tubular frame with flame retardant curtains, a blank warning plate on the middle leaf and a lead hook at one end. One leaf swings to close the bay.
AnimatedCrane man basket in its stillage (Shipyard and Dry Dock)
A two person crane basket with mesh sides, a gated entry, a rigid yoke and a single lifting eye, standing in the steel stillage it is parked and inspected in. The basket lifts straight out of the stillage.
Keel block (Shipyard and Dry Dock)
A built up keel block 1.2 m tall on a 1.4 m concrete base: cross laid oak timbers under a softwood capping piece, with a steel banding strap, for taking a ship's keel on a dock bottom.
Bilge block with sloped cap (Shipyard and Dry Dock)
A bilge block 1.35 m tall with a wedged oak cap set to the turn of the bilge, on a concrete base with a sliding sole plate and a tipping eye, for supporting a hull off its centreline.
Adjustable shoring prop (Shipyard and Dry Dock)
A raking steel shore 4.4 m long with a screw jack head, a pinned telescopic body, a hinged sole plate and a safety chain eye, for wedging a hull off the altar steps of a graving dock.
Hull plate stack on bearers (Shipyard and Dry Dock)
A stack of eight cut shell plates 3 m by 1.8 m lying on timber bearers in shop primer, edges prepared and a bare steel corner where the heat number would be stamped, for the plate yard beside a fabrication shed.
AnimatedSpotting Scope on a Tripod (Safari Camp and Bush Lodge)
A 1.45 m spotting scope on a timber tripod: a straight body with an objective bell, an eyepiece, a focus wheel and a pan arm. The scope and head are one node and pan on the clip; the focus wheel does not turn.
Field Desk with Binoculars and Map (Safari Camp and Bush Lodge)
A 1.3 by 0.66 m folding timber field desk with a pair of binoculars, a notebook, a pen tray and a map sheet laid out on it. The map is abstract: blocks and a single track line, no real place and no lettering. Static geometry.
Rifle Case Rack with Closed Cases (Safari Camp and Bush Lodge)
A 1.5 by 1.35 m timber rack carrying four closed, latched hard cases on two shelves, as a camp store stands between drives. The cases are plain boxes with catches and a handle; none is open and no contents are modelled. A blank tally card hangs on the frame.
AnimatedCamera on a Tripod (Safari Camp and Bush Lodge)
A 1.65 m camera tripod with braced legs, a pan head and a generic long lens camera on it. The head, arm and camera are one node and pan on the clip; the legs do not extend.
Camp Radio Set on a Table (Safari Camp and Bush Lodge)
A 1.1 by 0.6 m timber table with a boxed HF transceiver on it: speaker grille, two dials, a handset on its cradle, a clamped whip aerial and a blank log sheet beside it. No lettering or markings anywhere. Static geometry.
Jerrycan Rack (Safari Camp and Bush Lodge)
A 1.35 m steel rack holding three 20 litre jerrycans on a raised tray, 0.72 m to the top rail. Cans are plain pressed shapes with cap and handle, no markings of any kind. Static geometry.
Header Tank on Timber Stand (Safari Camp and Bush Lodge)
A 1.0 m galvanised header tank on a braced timber stand 2.6 m high, with a hatch on top and a fall pipe down one leg, which is how a camp gets pressure to its showers. Static geometry; no water is modelled.
AnimatedSkid Mounted Water Bowser (Safari Camp and Bush Lodge)
A 2.2 m water bowser: a 1.1 m diameter tank in two steel cradles on a towable skid with a hitch, a filler hatch on top and an outlet with a gate tap at the back. The tap handle is one node and turns on the clip; the water is not modelled.
AnimatedCamp Battery Box (Safari Camp and Bush Lodge)
A 0.9 by 0.6 m vented steel battery box on a timber pallet base, 0.58 m high, with side handles, a cable gland on the front and a lid hinged along the back. The lid is one node and lifts on the clip.
Solar Panel on Ground Frame (Safari Camp and Bush Lodge)
A 1.7 by 1 m solar panel on a galvanised ground frame, tilted 24 degrees on four feet, with three busbars across the cell face and a cable run off the low edge. Static geometry: the frame has no tracker.
Storm Lantern Set (Safari Camp and Bush Lodge)
Three galvanised storm lanterns of different sizes standing together, the tallest 0.44 m to the top of its handle, with glass chimneys in warm lamp colour. The glow is emissive material, not a light: the GLB embeds no lights.
Camp Dining Table and Chairs (Safari Camp and Bush Lodge)
A 2.2 by 1.1 m slatted timber dining table 0.76 m high laid with a runner, two lanterns and four plates, with four folding camp chairs round it. Stands under a tree or an awning. Static geometry; the chairs are modelled in place.
Folding Camp Chair (Safari Camp and Bush Lodge)
A crossed leg timber camp chair with a canvas seat and back and two flat arms, 0.58 m wide and 0.86 m to the top of the back. Static geometry: a folding chair folds on four joints and a rigid node cannot give them.
Paraffin Table Lamp (Safari Camp and Bush Lodge)
A 0.64 m paraffin lamp with a pressed steel reservoir, a knurled wick wheel on a short spindle, a warm glass chimney and a flared shade. The flame colour is emissive material only; the file embeds no lights. Static geometry.
Camp Kitchen Prep Table (Safari Camp and Bush Lodge)
A 1.6 by 0.7 m slatted timber prep table 0.88 m high with a lower shelf, a steel bowl and a chopping board on the top and two crates of dry stores underneath. Static geometry.