Free models · Game-ready GLB
Buildings
Every building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
2,991 free GLB models
AnimatedShop awning on folding arms (Animated Mechanisms Kit)
A 3.1 m amber shop awning at 16 degrees on two folding arms and a roller bar, with a scalloped valance, over a glazed shop front with an iron surround.
AnimatedVentilation louvre with linked blades (Animated Mechanisms Kit)
Seven blade louvre panel in a painted frame with a bolted head flashing and an amber operating linkage down one side. The blades turn from closed to open together.
AnimatedWindmill sail cross on a tower stub (Animated Mechanisms Kit)
Four lattice sails 4.8 m across on a windshaft, mounted on a tapered tower stub with a timber cap, a boarded door and a shaft bearing housing.
AnimatedPortcullis gate with winch drum (Animated Mechanisms Kit)
Seven bar spiked iron grille running in channel guides between two gate piers, lifted into a crenellated gatehouse chase by a timber winch drum on the front wall.
AnimatedFour wing revolving door drum (Animated Mechanisms Kit)
Free standing revolving door: two curved glass enclosure quadrants between mullion posts, iron floor and head rings, a canopy and four glazed wings on a central shaft.
AnimatedCounterweighted timber drawbridge (Animated Mechanisms Kit)
Nine plank timber deck banded in iron, hinged on the front edge of a stone abutment between two winch towers. It stands upright at rest and lowers to a bridge.
AnimatedSaloon swing doors (Animated Mechanisms Kit)
Pair of half height slatted timber bat wings on spring pivots, hung clear of the floor and the head of a 1.6 m opening so they rock through a rest position.
AnimatedPressure airlock door with locking dogs (Animated Mechanisms Kit)
Thick ribbed slab with a glazed porthole that rises up an exposed guide frame after four amber locking dogs rotate clear of the jambs.
AnimatedUp and over garage tilt door (Animated Mechanisms Kit)
Four panel steel door on top pivots with diagonal counterbalance arms, tilting up and back into the head of a 2.5 m garage opening.
AnimatedAutomatic sliding door pair (Animated Mechanisms Kit)
Two glazed leaves on an overhead roller track with a belt drive motor and a control box, sliding apart into the reveals of a 2.2 m opening.
AnimatedIris blast door with six blades (Animated Mechanisms Kit)
Six overlapping steel blades hinged around a bezel ring close a 2.2 m circular portal cut through a wall bay. Each blade swings outward on its own pin.
AnimatedRoller shutter door with barrel hood (Animated Mechanisms Kit)
Twenty one slat steel curtain running in side guides under a barrel hood, with an amber bottom rail and a wall control box. The curtain bunches into the hood as it lifts.
AnimatedDouble leaf door in a wall bay (Animated Mechanisms Kit)
Pair of framed steel leaves hung on opposite jambs of a 2 m opening, with vertical pull bars, glazed vision panels and a bolted transom beam above.
AnimatedHinged single door in a wall bay (Animated Mechanisms Kit)
Single steel leaf on three knuckle hinges inside a 3 m painted wall bay, with lever handles both sides, a glazed vision panel and an overhead closer arm.
Transfer tunnel with hatch (Space Station and Docking Bays)
A 2 m square-section transfer vestibule with a clear 1.7 m bore between two hatch ports, a 1.5 m swing hatch standing open on a named hinge node with a viewing pane, interior rails and a wall control panel.
External stowage platform (Space Station and Docking Bays)
A 3.2 by 2 m external stowage platform: a slatted deck on standoffs, four spare orbital replacement units under tie-down straps, a side bracket with a truss port, a grapple fixture and an EVA rail.
Truss rotary joint (Space Station and Docking Bays)
A 2.7 m truss rotary joint: two short truss stubs, fixed race housings and a 3 m drive ring with twelve trundle bearing blocks on a named rotating node, plus a routed power line.
Stowed radiator panel array (Space Station and Docking Bays)
The radiator retracted for launch or safing, with the three panels folded into a parallel stack on their hinge nodes above the pump bracket.
Deployed radiator panel array (Space Station and Docking Bays)
A deployed thermal radiator: a pump and rotary bracket on a truss port, a spine beam and three 3.4 by 2.6 m panels fanned on named hinge nodes with fluid line ribs.
Stowed solar array canister (Space Station and Docking Bays)
A 4.1 m launch-stowed array canister: the same rotating base, a mast canister and two folded blanket boxes clamped either side with yellow release latches and a grapple fixture.
Short connecting tunnel (Space Station and Docking Bays)
A 2.7 m pressurised connecting tunnel with hatch ports at both ends, a convoluted bellows mid-section, four external stiffener rods and translation rails on all four faces.
Deployed solar array wing (Space Station and Docking Bays)
An 11.5 m deployed photovoltaic wing: a rotating base canister on a named gimbal node, a lattice mast and two 9.2 by 3.3 m blankets with cell strips, edge battens and a tensioning bar.
Truss end cap (Space Station and Docking Bays)
A 2 m closed truss end: half bay, a plated bulkhead with four fluid couplings, an avionics box, a low-gain antenna mast and one truss port so a run can be terminated.
Truss bay segment with utilities (Space Station and Docking Bays)
The truss bay carrying a full utility fit: two orbital replacement unit boxes with gold covers and a routed fluid line loop between the longerons.