About
A 100 degree wedge cut from a scout hull and mounted on a steel cradle for study: outer and inner skins with their true wall thickness, three ring frames, six radial ribs, a deck plate and a glowing conduit run. Bounding size 6.84 x 2.70 x 3.49 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Cutaway hull section (UFO Crash Site and Recovery Facility)” asset in my project. Model: https://cdn.3dassets.dev/assets/17327/v1/model.glb Asset page: https://3dassets.dev/assets/ufo-crash-site-and-recovery-facility-cutaway-hull-sect-d9cf2ed0 Description: A 100 degree wedge cut from a scout hull and mounted on a steel cradle for study: outer and inner skins with their true wall thickness, three ring frames, six radial ribs, a deck plate and a glowing conduit run. - Dimensions (X × Y × Z): 6.839 × 2.696 × 3.495 metres - Triangles: 3.5k - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/17327/v1/model.glb', (gltf) => {
scene.add(gltf.scene)
})Cutaway hull section (UFO Crash Site and Recovery Facility)
A 100 degree wedge cut from a scout hull and mounted on a steel cradle for study: outer and inner skins with their true wall thickness, three ring frames, six radial ribs, a deck plate and a glowing conduit run.
More in Props & Furniture
Ridge Ornament Shachi (Feudal Japan Castle Town)
Golden shachi ridge ornament: an original plump fish with fins and a curled tail on a tile plinth, for keep and gate ridges.
Wayside Shrine (Vampire Crypt and Gothic Cathedral)
Wayside pillar shrine, 1.2 m wide and 3.4 m tall, with a pointed niche holding a skull and candles under a gabled cap and gilt cross.
Urn (Vampire Crypt and Gothic Cathedral)
Draped stone funerary urn, 0.8 m square and 1.8 m tall, on a plinth with a crimson cloth over the lid.
Wheelbarrow (Vampire Crypt and Gothic Cathedral)
Sexton wheelbarrow, 0.7 m wide and 2.45 m long, with a single iron-rimmed wheel, two legs and a heap of earth in the tray.
Lantern Post (Vampire Crypt and Gothic Cathedral)
Iron lantern post, 2.4 m tall, with a scrolled bracket holding a glowing four-sided lantern.
Open Grave (Vampire Crypt and Gothic Cathedral)
Open grave on a 3.6 by 2.6 m earth tile: 2.2 by 1 m pit dropping into darkness, a spoil heap at the head, a spade and two bone-white markers.
Angel Statue (Vampire Crypt and Gothic Cathedral)
Mourning angel statue, 2.5 m tall on a plinth, with head bowed and wings raised; static carved study.
Headstone Obelisk (Vampire Crypt and Gothic Cathedral)
Tapering obelisk memorial, 2.9 m tall, on a two-step plinth with a bone band.
Stone Cross (Vampire Crypt and Gothic Cathedral)
Ringed stone cross, 2.2 m tall, on a two-step plinth with a bone boss at the crossing.
Headstone Broken (Vampire Crypt and Gothic Cathedral)
Leaning headstone with the top broken off and a fragment lying at its foot.
Headstone Tablet (Vampire Crypt and Gothic Cathedral)
Round-topped headstone tablet, 0.7 m wide and 1.27 m tall, on a stepped base with incised lines.
Cauldron (Vampire Crypt and Gothic Cathedral)
Iron cauldron of dark crimson brew hanging from a tripod over a small log fire, 1.25 m tall.
Similar assets
Launch tube cutaway section (Cold War Missile Silo and Command Bunker)
A cutaway section of a hardened launch tube: an 18 m concrete wall 0.52 m thick with a welded steel liner, stiffener rings, three grating work platforms with handrails, a caged ladder, cable raceways, a stepped launch mount and a hazard-banded muzzle seat.
Steel arch set drift section (Underground Mine and Shaft Works)
A 4 m drift section supported by four rolled steel arch ribs on foot plates with steel lagging channels spanning between the ribs and two tie rods.
Wreck hull section (Interstellar Fleet: Modular Starships)
Wreck hull section with original detailed hull construction and static fittings.
Drift cutaway review section (Underground Mine and Shaft Works)
A review variant of the straight drift with the east half of the rock shell removed so the arched section, ditch, bolting and services can be inspected from the side.
Cheese Wedge (Fresh Produce and Groceries)
A wedge cut from a cheese truckle: the sector carries a rind and a paler layer under it on the curved face, both standing proud of the two cut faces.
Widened chamber cutaway review section (Underground Mine and Shaft Works)
A review variant of the widened chamber with the east wall removed so the excavated interior, roof frame and equipment plinth can be inspected and photographed from the side.
AnimatedShaft station cutaway review section (Underground Mine and Shaft Works)
A review variant of the shaft station with the east wall removed so the landing, guides, shaft sleeve and station fittings can be inspected and photographed from the side.
Tunnel cutaway study (Cave and Crystal Networks)
Functional review variant exposing half of the standard tunnel interior and floor.
Static shoal study (Underwater Reef Worlds)
Five small fish mounted on attached narrow coral-coloured supports above an integral reef base; one unanimated study.
Wall mounted drying rack (Home Appliances and Utility Room)
A 700 mm wall mounted retractable drying rack: a mounting board with fixing points, two side channels and four extended concertina arms carrying line rails.
Wall extractor fan 100 mm (Home Appliances and Utility Room)
A 200 mm square wall extractor fan: a chamfered face plate with a gravity shutter, a five blade rotor in a 100 mm duct collar, a mounting frame and a pull cord with an acorn.
AnimatedWall-mount comms cabinet (Office Lobby and Building Facilities)
A 0.62 m by 0.66 m wall-mount comms cabinet 0.42 m deep: a welded case with two mounting rails, a patch bank and two switches, a roof extract grille and a glazed hinged door as a named pivoted node.