3D Assets
@3dassets
Banner Rail Run (Velodrome and Track Cycling)
A 4 m bay of the trackside banner rail: two posts, a top rail and a blank white panel with a yellow edge band. The panel carries no wording or logo of any kind. Ports at both ends so the rail runs the length of a straight.
Scoreboard Frame (Velodrome and Track Cycling)
A trackside scoreboard: a 4.2 by 1.7 m frame on two posts with a blank white face and a red header band. Nothing is written on it, so a project can letter or texture the face as it likes.
Big Screen Frame (Velodrome and Track Cycling)
The arena big screen: a 6.4 by 3.6 m charcoal frame on two steel legs, 8 m to the top. The face is deliberately blank, a plain dark panel for a project to map its own video or texture onto.
Spectator Seating Bay (Upper Tier) (Velodrome and Track Cycling)
The upper tier bay: the same 6 m frontage with five rows on a 1.6 m concrete fascia, so it stands over a lower tier bay behind it. Ports at both ends.
VIP Box Front (Velodrome and Track Cycling)
The front of a hospitality box: a 6 m concrete parapet 1.1 m high with a charcoal capping, a glass rail above it and a blank blue panel on the face. Ports at both ends so boxes run in a terrace.
Spectator Seating Bay (Lower Tier) (Velodrome and Track Cycling)
A 6 m bay of the lower seating tier: four raked rows of moulded seats in alternating red and blue on a concrete rake, with a handrail across the back. Ports at both ends so bays run the length of a straight.
AnimatedLap Board and Stand (Velodrome and Track Cycling)
The laps to go board on its stand: a two post frame with a blank white card and a hinged charcoal leaf over it that flips on the head rail. The number face is a plain white block, so a project can letter it however it likes.
Photo Finish Rig (Velodrome and Track Cycling)
The photo finish camera on its tripod: three splayed steel legs, a pan head and a charcoal body with a lens barrel and a yellow control box, 1.8 m to the lens. Static, because the head is a linkage rather than a single rigid joint.
AnimatedBell on a Stand (Velodrome and Track Cycling)
The bell rung for the last lap, hung from a two post stand 1.6 m up: a brass coloured bell with a clapper ball, on a named node at the head rail so the whole bell rocks. The stand is ballasted and the bell is struck by hand, so nothing else moves.
AnimatedTiming Hut (Velodrome and Track Cycling)
The trackside timing hut: a 3 by 2.4 m cabin with a long glazed window to the track, a charcoal roof, a step at the door and a blank red fascia band. The door is a named node on its hinge stile. Empty inside and unlit.
AnimatedJudges Tower (Velodrome and Track Cycling)
The raised officials tower on the home straight: a concrete base, four steel legs, a glazed cabin 3.3 m up with a run of steps to its door, and a flat roof deck. The cabin door is a named node on its hinge stile. Unlit and unoccupied.
Start Light Tree (Velodrome and Track Cycling)
The three lamp start light tree used for timed starts: a ballasted mast 2.6 m tall with a charcoal head carrying red, amber and green lenses facing the track. The lenses are plain coloured discs and emit no light.
AnimatedStarting Gate with Holder Frame (Velodrome and Track Cycling)
The wheeled frame that holds a bicycle upright for a standing start: a ballasted base on castors, two uprights and a head rail, with a hinged holder arm that lifts clear to release. The arm is a named node on the head rail pivot.
Infield Floor Module (Velodrome and Track Cycling)
An 8 m square of the blue track centre floor, 0.12 m thick, with white marking tape along two edges. Edge ports on all four sides so the whole infield lays flat and continuous inside the apron.
Track Side Fence Run (Velodrome and Track Cycling)
A 4 m bay of the 2.2 m fence that closes the back of the track apron: two footed posts, three steel rails and eleven charcoal uprights. Ports at both ends so it runs round the inside of the arena.
Infield Safety Rail Run (Velodrome and Track Cycling)
A 4 m bay of the tubular rail that separates the track centre from the apron: three footed posts with a top rail at 1 m and a mid rail, in steel. Ports at both ends, so bays run round the whole infield.
Concourse Floor Module (Velodrome and Track Cycling)
An 8 m square of poured concourse floor, 0.12 m thick, with a saw cut joint crossing it. Edge ports on all four sides, so a plot lays as one continuous surface under the track and the seating.
Finish Line Plate (Velodrome and Track Cycling)
The finish line across the track: a 0.55 m overlay plate of ten black and white blocks running the full 6 m width, cut to the straights 13 degree camber so it lies flush on a straight module in front of the judges tower.
Pursuit Line Plate (Velodrome and Track Cycling)
The white pursuit line across the full 6 m width of the track, on a 0.5 m overlay plate cut to the same 13 degree camber. Two of these sit half a lap apart on opposite straights, which is where a pursuit starts and finishes.
Track Surface Board Panel (Velodrome and Track Cycling)
A spare panel of track decking, 2.4 by 1.2 m of pale pine boards on two steel bearers, for laying flat in the track centre as a repair stack or a working platform. Six raised boards read as the plank courses of the running surface.
Sprinters and Stayers Line Plate (Velodrome and Track Cycling)
An 8 m overlay plate carrying the three lines that run the length of the track: the white measurement line 0.2 m up from the inner edge, the red sprinters line at 1.05 m and the blue stayers line at 2.45 m. Cut to the straights 13 degree camber and laid on a straight module.
Track Apron Bend Module (Velodrome and Track Cycling)
The curved 30 degree length of the apron, cut to a 9.4 m inner radius so it closes round the ends of the track centre. The origin is the centre of the circle it is cut from.
Track Apron Module (Velodrome and Track Cycling)
An 8 m length of the flat concrete apron between the track centre and the cote d azur, 3 m wide and 0.35 m thick so its surface is level with the tracks inner edge. Ports at both ends.
Cote d'Azur Strip Module (Velodrome and Track Cycling)
The 0.6 m blue strip that runs round the inside of the racing surface, level with the apron and flush with the tracks inner edge. An 8 m straight length with ports at both ends.