3D Assets
@3dassets
Helmet Rack (Velodrome and Track Cycling)
A four peg helmet rack 1.4 m wide: a steel floor frame, a head rail and four aerodynamic track helmets hung on it, in plain white and red with no markings. The helmets are part of the rack.
AnimatedSpares Crate (Velodrome and Track Cycling)
A wheeled blue spares crate 0.9 m long with a charcoal lid hinged along its back edge and banding round the body. The lid and the two castor pairs are named nodes. Closed and empty.
AnimatedMechanics Bench with Tools (Velodrome and Track Cycling)
The track centre workbench: a 2 m charcoal carcass with a timber top, two tool drawers, a vice, a parts tray and hand tools hung on a rail over it. The left drawer is a named node on its runners.
AnimatedTrack Pump (Velodrome and Track Cycling)
A floor standing track pump 1.25 m tall: a weighted foot with a step plate, a steel barrel with a yellow collar, a pressure dial and a T handle that is a named node and strokes down the barrel. The hose is a solid strip and does not move.
Disc Track Wheel (Velodrome and Track Cycling)
A single solid disc rear wheel for a track bicycle, 0.64 m across, standing on its tyre: a charcoal disc with a steel hub flange and a yellow valve patch. Leaned against a rack or a wall as a loose spare.
Spoked Track Wheel (Velodrome and Track Cycling)
A single eight spoke front wheel, 0.68 m across, standing on its tyre: a charcoal rim, a steel hub and pale bladed spokes. A loose spare to lean on a rack, a bench or a barrier.
Track Wheel Rack (Velodrome and Track Cycling)
A wheel rack holding four spare wheels on edge in a steel A frame, alternating a solid disc wheel and an eight spoke wheel. 1.8 m long, and the wheels are part of the rack rather than separate nodes.
Bike Rack (Velodrome and Track Cycling)
A five slot floor rack for track bicycles: a 2.4 m steel base plate with paired uprights making a wheel slot at each bay and a yellow kick rail along the front. Holds the bicycles upright without a rider or a kickstand.
AnimatedTurbo Trainer (Velodrome and Track Cycling)
A direct drive turbo trainer standing empty: splayed charcoal feet, a resistance unit body with a red cover and a steel drive drum that is a named node and spins. No bicycle is fitted, so it can be paired with any of the three bicycles.
AnimatedTrack Bicycle on a Work Stand (Velodrome and Track Cycling)
The track bicycle held clear of the floor in an A frame rear wheel stand, which is how it sits for a gear change or a wash. Both wheels are named nodes and spin freely. Riderless, and the chain is one solid strip that does not move.
AnimatedTrack Bicycle (Leaned) (Velodrome and Track Cycling)
The same track bicycle tipped 15 degrees onto its side, as it stands leaned against a rail or a barrier. The wheels are still named nodes and still roll. Riderless, and the chain is one solid strip that does not move.
AnimatedWarm Up Roller Set (Velodrome and Track Cycling)
A three drum roller set for warming up on: a low charcoal frame, two rear drums and one front drum on steel rails, with the belt between them modelled as a solid strip. Each drum is a named node on its own axle and spins. 1.5 m long.
AnimatedTrack Bicycle (Upright) (Velodrome and Track Cycling)
A fixed gear track bicycle standing upright on both wheels: steel frame, drop bars, one chainring and no brakes. Both wheels are named nodes on their own axles. Riderless, and the chain is one solid strip that does not move.
Track Centre Bench Run (Velodrome and Track Cycling)
Three 3 m benches in a row for the track centre, timber slats on steel frames with low backs, 4.8 m of seating end to end. Empty, like everything else in this pack.
Race Timing Desk (Velodrome and Track Cycling)
The commissaires and timing desk: a 2.6 m table with a lower shelf and a blue modesty panel, two flat screens lying face up on it and two equipment cases pushed underneath. The screens are blank charcoal panels.
Stair Core (Velodrome and Track Cycling)
A concrete stair core up to the upper concourse: a 3 by 4.6 m base, a solid flight of ten steps against a white core wall, a steel balustrade on the open side and a landing at 3.35 m. It stands on its own, so it drops against a seating tier or a wall.
Presentation Podium (Velodrome and Track Cycling)
A three step presentation podium 3.2 m across, in white and grey concrete with blue treads and a front kick rail. Empty: there are no people or trophies in this pack.
Entrance Tunnel Mouth (Velodrome and Track Cycling)
The mouth of the players tunnel onto the track apron: a 6 m concrete headwall with a 3.4 by 2.9 m dark opening, a capping band, a yellow lintel stripe and blue reveals. The opening is a recess, not a corridor.
Roof Truss Section (Velodrome and Track Cycling)
A 12 m portal of the hall roof: two 6 m steel columns on pad bases carrying a lattice truss with a strip of charcoal decking over it. Ports at both ends, so portals bay out along a wall. One edge of a plot is enough to read as a building.
Ceiling Light Rig (Velodrome and Track Cycling)
A suspended lighting bar for the hall roof: a 4.4 m lattice truss with two drop rods above it and four downlight cans under it. The origin is free, at the centre of the truss, because it hangs rather than stands; the rods reach 0.9 m above it.
Arena Wall Panel Run (Velodrome and Track Cycling)
A 4 m bay of the arena wall: a 5.9 m white panel on a concrete kicker with pilasters at each end, a charcoal head band and a blue stripe at high level. Ports at both ends so bays run along the back of the seating.
Flood Light Truss (Velodrome and Track Cycling)
A free standing lighting mast: two ballasted A frames carrying a 5.2 m lattice truss at 6 m with four flood heads on it, faces down. The lamp faces are plain white panels and no light is emitted.
Cone Set (Velodrome and Track Cycling)
Five 0.47 m marker cones on square bases, in yellow with a white reflective band, scattered as a set for closing a lane of the apron or marking a warm up area.
Crowd Barrier Set (Velodrome and Track Cycling)
A 2.4 m linked crowd barrier with splayed feet, a top rail at 1.05 m and six uprights, in bare steel. Ports at both ends so a run of them closes off an entrance or a working area.