3D Assets
@3dassets
AnimatedFalse Bookcase Door (Escape Room and Puzzle Venue)
A 1.2 m walnut bookcase that is the door out of a study: five shelves of abstract books and a brass candlestick catch on a case 1.08 m wide, on a concealed hinge in its own lining, so the whole case swings out of the wall. Book spines are plain blocks, never readable titles.
Pressure Plate Floor Tile (Escape Room and Puzzle Venue)
The same 1.2 m floor tile with a 660 mm steel pressure plate in a brass surround set into it and a red state lamp at one corner. The plate travels 8 mm in use, which is too little to read as a clip, so it ships static.
Puzzle Room Floor Tile (Escape Room and Puzzle Venue)
A 1.2 m square floor tile 54 mm thick: a dark deck carrying a walnut board face with four brass corner studs. Ports at the four edge midpoints tile a room, a corridor or a whole venue in both directions.
AnimatedPuzzle Room Wall, Hidden Panel Section (Escape Room and Puzzle Venue)
A panelled wall module with a 700 by 1100 mm section that is really a door: a concealed hinge on its left stile, a brass finger pull and a lined recess behind it with a key bar. Closed it is one more panel in the lining. Same ports as the plain module.
AnimatedPuzzle Room Door Module (Escape Room and Puzzle Venue)
A 1.2 by 2.6 m wall module with an 800 by 2050 mm doorway in it: a framed timber leaf on a brass lever handle with a glazed vision port in a brass surround, a magnetic lock and armature plate at the head with its status lamp, and a closer arm. Same wall ports as the plain module.
Puzzle Room Wall Module (Escape Room and Puzzle Venue)
A 1.2 by 2.6 m puzzle room wall module, 120 mm thick, painted plaster over a stud core and dressed on both faces with a walnut skirting and picture rail. Its wall-left and wall-right ports butt module to module, so a themed room of any size closes on the same grid.
Puzzle Room Wall Module, Timber Panelled (Escape Room and Puzzle Venue)
The same 1.2 by 2.6 m wall module dressed as a study: dark walnut lining with two rows of raised panels either side of a brass dado rail, on both faces. Use it to theme one room of a venue without changing the grid.
Care Home Bedroom, Day Room and Bathroom (Care Home and Day Room)
A working care home floor: a resident's bedroom with the profiling bed under its ceiling hoist track, the bedside cabinet, over bed table, wardrobe, chest of drawers, armchair and a shelf of photographs; a corridor of handrail sections past the bedroom door and its memory...
Day Room Carpet Tile (Care Home and Day Room)
The same 1.2 m floor tile as a bordered carpet tile, for the day room, the bedrooms and the quiet end of a corridor.
Corridor Floor Tile (Care Home and Day Room)
A 1.2 m square safety vinyl floor tile, 24 mm thick, with an oak toned welded joint along two edges.
Corridor Handrail Section (Care Home and Day Room)
A 1.2 m corridor handrail section: a shaped oak rail on two steel plates with a coloured band behind it, so a resident can see the rail against a pale wall.
AnimatedFire Door Module with a Hold Open (Care Home and Day Room)
The wall module with a 940 mm fire door: a cream leaf with a tall vision panel and a coloured rail, an overhead closer, a hold open unit on the frame and a blank sign beside it.
AnimatedWeighing Chair (Care Home and Day Room)
A 600 mm weighing chair on four castors: a padded seat and back over the load cell housing, arms, footplates, a push handle and a display at the back.
Physiotherapy Parallel Bars (Care Home and Day Room)
A 2.4 m pair of physiotherapy parallel bars at 860 mm on four floor plates, with oak rails, end caps and a walkway mat between them.
AnimatedRollator with a Seat (Care Home and Day Room)
The frame on four wheels with a padded seat, a back strap, brake levers on the grips and a bag under the seat.
Walking Frame (Care Home and Day Room)
A 580 mm walking frame at 900 mm: a tubular frame on four ferrules with moulded hand grips and two cross rails.
AnimatedWheelchair (Care Home and Day Room)
A 620 mm folding frame wheelchair: 600 mm rear wheels with hand rims, front castors, padded arms, push handles and footplates, with a warm woven seat and back.
AnimatedSluice Sink Unit (Care Home and Day Room)
A 900 mm sluice unit at 900 mm: a stainless top with a deep bowl and a tall mixer, a cupboard under it and a glove box and paper roll on the upstand.
Raised Toilet Seat and Support Frame (Care Home and Day Room)
A close coupled toilet with a raised seat and a free standing support frame: padded arms at 940 mm, adjustable legs on floor pads and a coloured seat a resident can see.
Grab Rail Set (Care Home and Day Room)
A coloured grab rail set on steel wall plates: a 920 mm horizontal rail, an angled rise to the corner and a 630 mm vertical drop rail, in a contrasting colour a resident with poor sight can find.
AnimatedShower Chair (Care Home and Day Room)
A 520 mm shower chair on four castors: a slatted seat with a horseshoe cut, arms, a back band and a push handle, at a 520 mm seat height.
Hand Gel Dispenser (Care Home and Day Room)
A 130 mm wall mounted hand gel dispenser on a steel backplate, with a level window, a press pad and a blank sign above it.
AnimatedWalk In Assisted Bath (Care Home and Day Room)
A 780 mm by 1.6 m walk in bath at 1.06 m: a moulded tub with a seat at the far end, an outward opening side door with a lever latch, a mixer tap, a shower on a rail and a coloured grab rail along the rim.
AnimatedPedal Bin (Care Home and Day Room)
A 400 mm pedal bin at 660 mm, a cream body with a coloured lid and band and a pedal on a post at the front.