
Walkable demo
Corner pub
Step into a 16 by 10 metre pub built from the Bar, Pub and Brewery Taproom pack: a 9 m bar with fonts and hand pulls, five back-bar bays, a fireplace snug, three booths, pedestal tables, a refectory table, darts and a jukebox.
About
One pub room from 24 of the pack's 130 models, in the room preset with dark walls, warm light and lamps under a 3.4 m ceiling.
You come in through the entrance draught lobby facing the bar: a corner, four 1200 mm counter modules, the till position and the end with the lift flap, with the eight-tap keg font and the hand-pull set on top and seven stools with backs in front. Behind it are five back-bar bays. The pub fireplace sits in the west wall between two high-back settles; three four-cover booths line the east wall. Three round pedestal tables with spindle-back chairs and a refectory table with benches fill the middle, with a poseur table, the jukebox and the dartboard cabinet by the door.
This pack ships animation clips: the lift flap, the till drawer, the back-bar fridge and mirrored bays, the dartboard cabinet doors and the draught lobby door play as you come within three metres and rewind when you leave.
Every piece here is a published model from the pack, placed by hand. Walk with the keys or touch, and approach a piece to see it move if it has animation. Colliders, navigation and gameplay are yours to add.
Points of interest
The bar
A corner, four 1200 modules, the till position and the end with the lift flap make a 9 m bar, with an eight-tap font and three hand pulls on top. The flap, the till and the fridges have clips: walk up and they open.
Bar counter module 1200 (Bar, Pub and Brewery Taproom)Back bar
Five back-bar bays at 1.2 m steps: bottle fridge, spirit shelves, a mirrored bay, glass shelves and bottle steps, under three enamel pendants.
Back bar mirrored bay (Bar, Pub and Brewery Taproom)The snug
The pub fireplace in the west wall with a high-back settle each side of it.
Pub fireplace (Bar, Pub and Brewery Taproom)Booths
Three four-cover booths along the east wall, and a poseur table by the jukebox.
Pub booth, four cover (Bar, Pub and Brewery Taproom)Tables
Three round pedestal tables with spindle-back chairs and a refectory table with benches.
Round pedestal pub table (Bar, Pub and Brewery Taproom)Darts
The dartboard cabinet with its oche mat by the door; its doors open as you approach. You came in through the draught lobby.
Dartboard cabinet with oche mat (Bar, Pub and Brewery Taproom)
Use with an AI agent
Copy this prompt into your AI chat to rebuild the layout, then describe what to change.
Rebuild the "Corner pub" demo scene from the Bar, Pub and Brewery Taproom pack in my project. Layout (JSON, every placement with its CDN URL): https://3dassets.dev/api/v1/demos/bar-pub-and-brewery-taproom Pack manifest: https://3dassets.dev/api/v1/packs/bar-pub-and-brewery-taproom Demo page: https://3dassets.dev/demos/bar-pub-and-brewery-taproom - 50 placements of 24 models; units are metres, +Y up, rotation is yaw in degrees about +Y - Spawn at (0, 0, 3.2) facing 180 degrees; eye height 1.6 m - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader, one load per distinct model, cloned per placement; no decoders required
Also available as JSON or Markdown, and via the MCP server.
Models in this demo
Bar counter corner (Bar, Pub and Brewery Taproom)
A 90 degree bar counter corner on the same grid: two fielded panel faces meeting on a turned pilaster, a mitred bar top with brass nosing on both edges and a foot rail turning the corner.
Bar counter module 1200 (Bar, Pub and Brewery Taproom)
A 1.2 m pub bar counter module: recessed plinth, fielded timber front panelling under a moulded rail, a postformed bar top with a bullnose nosing and brass edge strip, a brass foot rail on stanchions and a stainless working deck with an upstand inside the bar.
Bar counter till position (Bar, Pub and Brewery Taproom)
A counter module built as the till position: a stainless plinth carrying a tilted touch terminal and a card reader, a docket spike and a cash drawer under the bar top.
Bar counter end with lift flap (Bar, Pub and Brewery Taproom)
The service end of a bar counter: a panelled half with a fixed bar top, a turned newel post and a hinged bar-top leaf over an open passage with a slatted swing gate below.
Back bar bottle fridge bay (Bar, Pub and Brewery Taproom)
A back bar bay with a glazed bottle fridge in the base: two glass doors on barrel hinges with bar handles over three wire shelves, a louvred grille, and two display shelves with gallery rails and a blank lit sign band above.
Back bar spirit shelf run (Bar, Pub and Brewery Taproom)
An open back bar bay: four deep timber spirit shelves on shaped brackets against a boarded back, each with a brass gallery rail, over the panelled base and under the moulded cornice.
Back bar mirrored bay (Bar, Pub and Brewery Taproom)
A back bar bay built around a tall framed mirror: a panelled base cabinet with fielded doors, a bullnose worktop, a moulded mirror frame, a single display shelf with a brass gallery rail and a moulded cornice above.
Back bar glass shelf run (Bar, Pub and Brewery Taproom)
A back bar bay of five toughened glass shelves on brass pin brackets against a mirrored back, each with a slim brass light strip beneath it.
Back bar bottle steps bay (Bar, Pub and Brewery Taproom)
A full height back bar bay of bottle steps: a panelled base cabinet with fielded doors and brass knobs, a bullnose worktop, four stepped display tiers with moulded nosings and brass gallery rails against a mirrored back, framed by turned pilasters under a moulded cornice.
Eight tap keg font (Bar, Pub and Brewery Taproom)
An eight tap keg font: a taller lathed column carrying two tiers of four cast taps with turned handles, on a stepped base with a wide slotted drip tray.
Hand pull set of three (Bar, Pub and Brewery Taproom)
Three cask hand pulls on the bar top: each a chrome C-clamp gripping the bar, a polished barrel with a beaded shoulder, a swan-neck spout, a long curved lever on a bearing yoke ending in a turned ball grip, and a blank oval pump clip on its bracket. Drip tray in front.
Bar stool with back (Bar, Pub and Brewery Taproom)
A 760 mm bar stool with a back: four turned legs, a brass foot ring, a piped round seat pad and a hooped back on two turned uprights with a shaped cresting rail.
Enamel pendant light (Bar, Pub and Brewery Taproom)
An enamelled coolie pendant light: a ceiling rose, a chain drop, a rolled-rim shade, a lamp holder and a bulb. Rests at y=0 for inspection and hangs from its rose in use.
Pub wall clock (Bar, Pub and Brewery Taproom)
A 380 mm pub wall clock: a turned timber case with a brass bezel, a blank dial with twelve hour marks and two hands on a centre boss.
Pub fireplace (Bar, Pub and Brewery Taproom)
A 1.3 m pub fireplace: a stone hearth, a cast surround with fluted jambs and a moulded frieze, a bullnose mantel shelf, tiled cheeks and back, and a barred firebasket with coals.
High back snug settle (Bar, Pub and Brewery Taproom)
A 1.4 m high back snug settle: a panelled bench base with a piped seat pad, a deep buttoned back pad under a fielded panel field, scrolled arms on turned posts and a moulded cresting rail with a shelf.
Pub booth, four cover (Bar, Pub and Brewery Taproom)
A 1.5 m four cover pub booth: two panelled benches with piped seat pads, buttoned upright back pads on panelled boards, moulded capping rails and a cast-iron pedestal table with a bullnose timber top.
Round pedestal pub table (Bar, Pub and Brewery Taproom)
A 720 mm round pub table: a moulded cast-iron foot and turned column on a spider plate, under a lathed timber top with a brass edge band.
Spindle back pub chair (Bar, Pub and Brewery Taproom)
A spindle back pub chair: four splayed turned legs with H stretchers, a saddled seat with a thin piped pad, five turned spindles between two uprights and a shaped comb rail.
Refectory table and benches (Bar, Pub and Brewery Taproom)
A 1.9 m refectory set: a planked table on trestle ends with a central stretcher, and two matching plank benches on their own trestles.
Poseur table (Bar, Pub and Brewery Taproom)
A 1.05 m poseur table: a heavy cast-iron foot and turned column, a lathed round top with a brass edge band and a brass foot ring on three brackets.
Dartboard cabinet with oche mat (Bar, Pub and Brewery Taproom)
A wall dartboard cabinet with its oche mat: a panelled carcass with a moulded cornice, a bristle board with a wire spider, ring bands and a bullseye, two hinged doors with blank scoring panels and turned knobs, over a 2.4 m rubber mat with a brass throw line.
Pub jukebox (Bar, Pub and Brewery Taproom)
A floor-standing pub jukebox: a moulded plinth, a timber cabinet with chrome corner pilasters, an arched lit dome, a glazed selection window over blank title cards, a raked button rail and a barred speaker grille.
Entrance draught lobby (Bar, Pub and Brewery Taproom)
A 1.5 m timber draught lobby: corner posts and fielded side panels with glazed upper lights, a moulded head both sides, a threshold plate and two glazed swing doors with brass push plates.