Free models · Game-ready GLB
Animated
Every stylized modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
218 free GLB models
AnimatedPhysio Bed (Velodrome and Track Cycling)
A 1.9 m portable physio bed with a blue base, a white pad and a head section that is a named node and lifts on its hinge. Empty, made up and unoccupied: there are no people in this pack.
AnimatedSpares Crate (Velodrome and Track Cycling)
A wheeled blue spares crate 0.9 m long with a charcoal lid hinged along its back edge and banding round the body. The lid and the two castor pairs are named nodes. Closed and empty.
AnimatedMechanics Bench with Tools (Velodrome and Track Cycling)
The track centre workbench: a 2 m charcoal carcass with a timber top, two tool drawers, a vice, a parts tray and hand tools hung on a rail over it. The left drawer is a named node on its runners.
AnimatedTrack Pump (Velodrome and Track Cycling)
A floor standing track pump 1.25 m tall: a weighted foot with a step plate, a steel barrel with a yellow collar, a pressure dial and a T handle that is a named node and strokes down the barrel. The hose is a solid strip and does not move.
AnimatedTurbo Trainer (Velodrome and Track Cycling)
A direct drive turbo trainer standing empty: splayed charcoal feet, a resistance unit body with a red cover and a steel drive drum that is a named node and spins. No bicycle is fitted, so it can be paired with any of the three bicycles.
AnimatedTrack Bicycle on a Work Stand (Velodrome and Track Cycling)
The track bicycle held clear of the floor in an A frame rear wheel stand, which is how it sits for a gear change or a wash. Both wheels are named nodes and spin freely. Riderless, and the chain is one solid strip that does not move.
AnimatedTrack Bicycle (Leaned) (Velodrome and Track Cycling)
The same track bicycle tipped 15 degrees onto its side, as it stands leaned against a rail or a barrier. The wheels are still named nodes and still roll. Riderless, and the chain is one solid strip that does not move.
AnimatedWarm Up Roller Set (Velodrome and Track Cycling)
A three drum roller set for warming up on: a low charcoal frame, two rear drums and one front drum on steel rails, with the belt between them modelled as a solid strip. Each drum is a named node on its own axle and spins. 1.5 m long.
AnimatedTrack Bicycle (Upright) (Velodrome and Track Cycling)
A fixed gear track bicycle standing upright on both wheels: steel frame, drop bars, one chainring and no brakes. Both wheels are named nodes on their own axles. Riderless, and the chain is one solid strip that does not move.
AnimatedLap Board and Stand (Velodrome and Track Cycling)
The laps to go board on its stand: a two post frame with a blank white card and a hinged charcoal leaf over it that flips on the head rail. The number face is a plain white block, so a project can letter it however it likes.
AnimatedBell on a Stand (Velodrome and Track Cycling)
The bell rung for the last lap, hung from a two post stand 1.6 m up: a brass coloured bell with a clapper ball, on a named node at the head rail so the whole bell rocks. The stand is ballasted and the bell is struck by hand, so nothing else moves.
AnimatedTiming Hut (Velodrome and Track Cycling)
The trackside timing hut: a 3 by 2.4 m cabin with a long glazed window to the track, a charcoal roof, a step at the door and a blank red fascia band. The door is a named node on its hinge stile. Empty inside and unlit.
AnimatedJudges Tower (Velodrome and Track Cycling)
The raised officials tower on the home straight: a concrete base, four steel legs, a glazed cabin 3.3 m up with a run of steps to its door, and a flat roof deck. The cabin door is a named node on its hinge stile. Unlit and unoccupied.
AnimatedStarting Gate with Holder Frame (Velodrome and Track Cycling)
The wheeled frame that holds a bicycle upright for a standing start: a ballasted base on castors, two uprights and a head rail, with a hinged holder arm that lifts clear to release. The arm is a named node on the head rail pivot.
AnimatedTraining Club Shed (Dog Agility and Training Field)
A 3.2 x 2.4 m timber club shed on a concrete pad, 2.75 m to the ridge, with a blue braced door on the front, a window on the gable end and a yellow board beside the door. The door is one node on its hinge jamb, so the clip opens and closes it about the real hinge.
AnimatedGrooming Table (Dog Agility and Training Field)
A 1.1 m rubber topped grooming table at 0.78 m on four castors, with a clamped grooming arm and noose and a kit box on the top. The castors are nodes on their own axles; the arm is static, because it is set by hand and clamped.
AnimatedCrate Trolley (Dog Agility and Training Field)
A 1.1 m timber deck trolley on four 0.2 m castors with a blue handle, the way a crate and a kit bag get from the car park to the ring. Each castor is its own node on its own axle, so the clip rolls all four together.
AnimatedField Litter Bin (Dog Agility and Training Field)
A 0.82 m blue field bin with a domed lid hinged along its back edge and a yellow notice panel on the front. The lid is one node on the hinge, so the clip opens it the way the real one lifts.
AnimatedRing Entry Gate (Dog Agility and Training Field)
A 3 m gate bay for the ring rope: a hinged 1.4 m blue barred leaf between a hanging post and a strike post, with the rope carrying on from the strike post to the next stanchion. The leaf is one node on the hinge post, so the clip swings it about the real hinge.
AnimatedAgility Seesaw (Dog Agility and Training Field)
A 3.66 m seesaw plank on a cast fulcrum at 0.6 m, slatted, railed in blue and with a yellow up contact and a red down contact at the ends. The plank is one node on the axle itself, so the clip tips it about the real pivot and the base never moves.
AnimatedAgility Tyre Jump (Dog Agility and Training Field)
A 0.76 m red tyre slung in a 1.5 m steel frame at 1.75 m, held on two hanger rods above and two steadying rods to a yellow base tie below. The tyre is one node hung on the head rail, so the clip swings it in the frame; the frame and its weighted feet are static.
AnimatedAgility Spread Jump (Dog Agility and Training Field)
A two bar spread over a 0.5 m gap, the back bar set 0.16 m above the front one so the dog has to clear width as well as height. Each bar is its own node in its own cups.
AnimatedAgility Hurdle Jump, Upper Setting (Dog Agility and Training Field)
The same hurdle with its striped bar seated in the upper pair of cups, for the larger height classes on a mixed course. The cups are modelled at both settings on every hurdle; only the bar moves between them.
AnimatedAgility Hurdle Jump (Dog Agility and Training Field)
A 1.24 m single bar agility hurdle on two 0.86 m uprights with slatted blue and red wings, weighted feet and cups at 0.3 m and 0.55 m. The bar is one node resting in the lower cups, so the clip tips it in the cups the way a knocked pole does before it drops.