Free models · Game-ready GLB
Assets
Every model here is a game-ready GLB that drops into three.js, Blender, Godot, Unity and Unreal, free to use in personal and commercial work without crediting anyone.
Files are binary glTF with embedded WebP textures and quantized geometry, which three.js reads natively and Blender, Godot and Unity import as they are, so nothing needs a Draco or KTX2 decoder. Each asset page carries a permanent CDN URL you can load straight from your code.
22,099 free GLB models
Cable Tray Run (Nuclear Power Station and Control Room)
A 4 m bay of ladder cable tray on two stanchions at 2.8 m: pressed side rails with rungs on 300 mm centres and three cable bundles lying in it. End ports run it across a plant floor.
Cable Tray Corner (Nuclear Power Station and Control Room)
The cable tray turned through a right angle on two stanchions, for taking a run round a corner of the plant floor.
Bus Duct Riser (Nuclear Power Station and Control Room)
The bus duct bay with a riser dropping off one end to a cubicle top, with its link box and floor flange, for taking a run down to switchgear.
Bus Duct Run (Nuclear Power Station and Control Room)
A 4 m bay of enclosed bus duct on its own stanchions at 3 m: a galvanised casing with bolted joint covers, an inspection panel, phase marking beads and a blank tag. End ports run it across a plant floor.
AnimatedSwitchyard Transformer (Nuclear Power Station and Control Room)
A 3 m oil filled transformer on its bund plinth: a welded tank with radiator banks down both flanks, three bushings on the lid and three on the end, a conservator drum over them, a marshalling box with gauges and lamps, and a tap changer handwheel that turns.
Radiation Warning Sign Post (Nuclear Power Station and Control Room)
A 1.8 m boundary sign post on a footplate: a yellow board with the trefoil and a blank plate under it, and a chain eye on each side of the post for closing off an area.
AnimatedWaste Drum, Unmarked (Nuclear Power Station and Control Room)
The waste drum in plain galvanised finish for clean side use, with the same hinged lid.
AnimatedDrum Stacker (Nuclear Power Station and Control Room)
A hand hydraulic drum stacker: straddle legs on castors, a 2.1 m mast with a head sheave, a pump body with its lever at the back, and a carriage with a drum clamp ring that lifts on its own node.
Waste Drum, Lid Open (Nuclear Power Station and Control Room)
The waste drum with its lid held open at 96 degrees and the bag ring inside on show, for a drum being filled. The open pose is baked into the geometry, so the lid does not animate.
AnimatedWaste Drum (Nuclear Power Station and Control Room)
A 200 litre waste drum: a rolled steel body with two swage ribs, a trefoil on the flank and a clamp banded lid hinged at the back that lifts on its own node.
AnimatedSample Glovebox (Nuclear Power Station and Control Room)
A 1.5 m stainless sampling glovebox on a tubular stand: a sloped laminated window, two glove ports with the gloves hanging inside, a transfer port on the end, an extract duct off the top and a tool drawer in the stand.
Dosimeter Rack (Nuclear Power Station and Control Room)
An 800 mm wall rack of thirty two pocket dosimeters standing in their charging sockets on four shelves, with a trefoil badge at the head and a blank tag strip along the bottom.
Decontamination Shower (Nuclear Power Station and Control Room)
A 1.1 m decontamination shower: a galvanised tray with a gulley, two panelled sides, a riser with a 320 mm drench rose and a pull handle, an eyewash bottle on a bracket, an alarm beacon and a curtain rail.
Survey Meter Bench (Nuclear Power Station and Control Room)
A 1.6 m steel survey bench with a galvanised top and an upstand: a hand held survey meter with a dial and a carrying handle on it, its probe in a rest, and a tray of smear papers beside them.
AnimatedPPE Locker with Suits (Nuclear Power Station and Control Room)
A 1.2 m protective clothing locker: a painted carcass on a recessed plinth with four coveralls on a hanging rail, three hoods on the shelf above, and two louvred doors that swing on their own nodes.
Hand and Foot Monitor (Nuclear Power Station and Control Room)
A walk-up hand and foot monitor: a grating foot plate on a base, a raked top with two hand wells and their lit windows, and a display head with three lamp tiles above it.
AnimatedInstrument Cabinet Rack (Nuclear Power Station and Control Room)
A 640 mm instrument rack 2 m tall: a bolted frame with a back panel and eight plug-in modules, each with a pull handle, lamps and a small lit window, behind a glazed front door that swings.
Radiation Monitor Pillar (Nuclear Power Station and Control Room)
A 2.2 m area monitor pillar: a yellow column on a footplate carrying a readout box with a lit window and lamps, a detector head and a beacon on top, and a probe clipped to a bracket down one side.
Telephone Rack (Nuclear Power Station and Control Room)
A 900 mm telephone rack for a control room wall: a channel frame carrying four cradles with their handsets in them, one on the direct line in red, each with a small dial and a pair of lamps.
AnimatedKey Cabinet (Nuclear Power Station and Control Room)
A 600 mm wall key cabinet: a painted case with three hook rails and twenty one tagged keys on them, behind a glazed door with a knob. The door swings on its own node.
AnimatedOperator Chair (Nuclear Power Station and Control Room)
A five star operator chair on castors: a gas lift column, a padded seat and back on a steel frame, and two arms. Everything above the column swivels on one node.
AnimatedShift Log Desk (Nuclear Power Station and Control Room)
A 1.5 m shift log desk: a bullnosed top on a braced frame with a two drawer pedestal, the open log book and a pen tray on it, and an anglepoise lamp at the back corner. Both drawers run out on their own nodes.
AnimatedSupervisor Chair (Nuclear Power Station and Control Room)
The operator chair built taller, with a high back and a headrest pad, for the supervisor at the back of the room.
AnimatedScram Button Pedestal (Nuclear Power Station and Control Room)
A floor pedestal carrying a guarded trip push: a cast base and column, a raked head with a 150 mm red mushroom, a hinged clear guard over it that lifts, a badge on the column and a blank tag under the push.