Free models · Game-ready GLB
Assets
Every model here is a game-ready GLB that drops into three.js, Blender, Godot, Unity and Unreal, free to use in personal and commercial work without crediting anyone.
Files are binary glTF with embedded WebP textures and quantized geometry, which three.js reads natively and Blender, Godot and Unity import as they are, so nothing needs a Draco or KTX2 decoder. Each asset page carries a permanent CDN URL you can load straight from your code.
22,099 free GLB models
Alarm Annunciator Panel (Nuclear Power Station and Control Room)
A 1.6 m alarm annunciator: eighteen window tiles in a recessed face, some lit red and amber, with accept, reset and test pushes and a sounder grille on the bottom rail. Every window is blank, so no fault is named.
Rod Position Display (Nuclear Power Station and Control Room)
A pedestal mounted rod position display: a raked head 1 m wide carrying a forty eight cell lamp matrix with a third of the cells lit, a row of selector switches under it and a blank tag strip between them.
Mimic Wall Board (Nuclear Power Station and Control Room)
A 4 m mimic board on its own feet: a framed panel with a recessed face, raised flow lines linking abstract plant symbols and a lit lamp at every node, with a blank tag strip along the bottom.
Mimic Wall Board, Narrow (Nuclear Power Station and Control Room)
The mimic board in a 2 m width, for a shorter wall or a single system panel beside the desk.
Analogue Dial Bank (Nuclear Power Station and Control Room)
A 1.1 m instrument panel 2 m tall carrying twelve bezelled analogue dials in a recessed fascia, with three edgewise meter windows below them and a blank tag strip along the bottom.
AnimatedCurved Control Desk (Nuclear Power Station and Control Room)
A three bay control desk on a 2.6 m arc, 4.6 m across the ends: each bay a plinth and carcass with a postformed bench top, a raked switch fascia and an upright instrument head carrying dials, lamp tiles and blank tag strips, with two rocking selector levers on the middle bay.
AnimatedSwitch Panel Console (Nuclear Power Station and Control Room)
A 1.2 m floor standing switch panel 2.1 m tall: a recessed fascia with four rows of toggle switches and indicator lamps, a row of dials across the head, blank tag strips and a hinged back door for the wiring.
AnimatedStrip Chart Recorder (Nuclear Power Station and Control Room)
A 420 mm bench recorder: a painted case on rubber feet with a glazed front, a paper drum turning slowly behind it, a pen carriage across the chart and three lamps and a blank tag on the bottom rail.
AnimatedValve Handwheel Bank (Nuclear Power Station and Control Room)
A manifold stand of six isolating valves between two headers, 2.4 m wide and 2.3 m tall: each valve a bonneted body on a side-mounted stem with a spoked handwheel that turns, with a blank tag strip under every one.
AnimatedMain Steam Pipe Run with Valves (Nuclear Power Station and Control Room)
The pipe gallery bay with two flanged gate valves in it, each with a side-mounted stem and a spoked handwheel that turns, for breaking a run where it needs isolating.
Steam Drum Vessel (Nuclear Power Station and Control Room)
A 2.1 m diameter vertical steam drum 4.4 m tall: a dished top and bottom, lagging straps, a bolted manway on the flank, two flanged crown nozzles, a gauge glass, and an access platform with handrail and ladder.
Main Steam Pipe Run (Nuclear Power Station and Control Room)
A 4 m bay of pipe gallery standing on its own floor stands: a 680 mm lagged main at 2.2 m with a smaller feed line and a copper service line beside it, saddle clamped at each stand. End ports run the gallery across a plant floor.
Shell and Tube Heat Exchanger (Nuclear Power Station and Control Room)
A 4.2 m shell and tube heat exchanger on two concrete saddles: a 1.24 m shell with dished and flanged heads, four flanged nozzles top and bottom, a vent standpipe and a blank rating plate.
AnimatedFeedwater Pump Set (Nuclear Power Station and Control Room)
Two horizontal feed pumps on a shared concrete plinth: each a motor with a guarded coupling driving a volute casing, with a flanged discharge riser, a suction bend and a side-mounted isolating handwheel.
AnimatedTurbine Shaft Line (Nuclear Power Station and Control Room)
A 5.2 m length of shaft line between two bearing pedestals: a 400 mm shaft with coupling flanges at both ends, a barring gear wheel, oil pipework with sight glasses, and the turning gear drive standing beside it.
Condenser (Nuclear Power Station and Control Room)
A 6 m surface condenser: a welded shell on a hotwell, a bolted water box at each end with a flanged circulating water branch, the exhaust neck and its expansion bellows on top, and the air offtake off one corner.
Turbo Generator Set (Nuclear Power Station and Control Room)
A 7 m turbo generator on its plinth: a ribbed stator body with end shields, a terminal box with three bushings, a cooler run down the back, an exciter on the outboard end, and a grating walkway with handrail down the operating side.
Turbine Casing (Nuclear Power Station and Control Room)
A 6.4 m horizontally split turbine casing on its concrete plinth: a tapered barrel with a bolted joint flange down each side, three steam belts, two extraction branches with flanges, and a bearing housing at each end.
Control Rod Stand (Nuclear Power Station and Control Room)
A stand of five spare control rod clusters: 3.4 m absorber fingers hanging from their spiders in a bolted frame with two guide beams, on a footed base plate with a trefoil on the front.
Fuel Assembly on Cradle (Nuclear Power Station and Control Room)
A 4 m square fuel assembly lying on its handling cradle: a thirty six rod bundle with five spacer grids and both end nozzles, strapped across two bolsters on a wheeled frame with a lifting bail at one end.
AnimatedFuel Lifting Flask (Nuclear Power Station and Control Room)
A 1.7 m diameter shielded transfer flask 2.7 m tall: a finned body on a transport base, two lifting trunnions, a machined seal face and a bolted lid hinged at the back, with a trefoil on the flank.
Spent Fuel Storage Rack (Nuclear Power Station and Control Room)
A 1.56 m square storage rack for a fuel pond: thirty six neutron absorbing cells on a 260 mm pitch, 2.4 m deep, on a footed base plate with levelling pads and four lifting eyes.
Spent Fuel Pond Corner (Nuclear Power Station and Control Room)
The pond bay with a second coping kerb and handrail down its side edge, for closing the end of a pond. Its two ports face along each kerb.
Spent Fuel Pond Edge (Nuclear Power Station and Control Room)
A 4 m bay of spent fuel pond: a concrete coping kerb along one edge with a handrail and a trefoil badge, a skimmer weir let into it, the lined floor of the basin and the water surface 240 mm down. End ports run it into a pond of any size.