Free models · Game-ready GLB
Modern
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
13,004 free GLB models
Linkspan hydraulic tower (Ferry Terminal and Harbour Crossing)
Lifting tower 11 m tall for the seaward end of a linkspan: four raked steel legs on a concrete plinth, cross bracing, a caged ladder, a grey machinery head with a yellow band, and two charcoal hydraulic rams reaching down over the bridge.
Foot passenger gangway tower (Ferry Terminal and Harbour Crossing)
Boarding tower 8.4 m tall with a covered gangway arm: a braced steel frame clad in blue panels with a glazed stair well, a charcoal roofed walkway 8 m out toward the ship at 5.6 m, and a raking strut under its outer end.
Vehicle deck ramp section, 6 m (Ferry Terminal and Harbour Crossing)
Steel vehicle ramp 6 m long and 4.6 m wide climbing 1.4 m at 13 degrees, with a chequered deck, charcoal grip bars, yellow kerbs, a braced trestle under the high end and a concrete abutment under the low one, for the approach to a linkspan or a ship's deck.
AnimatedLinkspan bridge section (Ferry Terminal and Harbour Crossing)
Hinged linkspan bridge 6 m long and 7 m wide carrying two vehicle lanes out to a ship: a chequered steel deck with yellow kerbs and handrails on a welded box girder, pinned to a pair of charcoal shore bearings it tilts on as the tide moves the ship.
Quay fuel bunker point (Ferry Terminal and Harbour Crossing)
Bunkering station 2.2 m wide: a grey cabinet with a red isolator panel and a lit gauge, a coiled charcoal hose on a steel reel, two bollard guards and a yellow spill kerb, for fuelling a ferry alongside.
Lifebuoy post (Ferry Terminal and Harbour Crossing)
Quayside rescue post 1.4 m tall: a white post on a bolted plate carrying a red and white lifebuoy on its bracket, a coiled throwing line below and a blue instruction plate, for the edge of any quay or linkspan.
Dolphin mooring pile (Ferry Terminal and Harbour Crossing)
Breasting dolphin standing in the water: four raked steel tubes braced together under a 2.6 m deck with a charcoal fender face, a yellow handrail and a mooring hook, for holding a ferry off the quay at its berth.
Quay bollard with mooring rope (Ferry Terminal and Harbour Crossing)
Cast steel kidney bollard 0.9 m tall on a bolted base plate with a cream mooring rope dressed over it in a loose eye and run off toward the water, for the quay edge of a ferry berth.
Quay fender panel (Ferry Terminal and Harbour Crossing)
Berth fender 2.4 m wide and 2.6 m tall: a charcoal rubber face panel on two steel buckling cylinders and a bolted back frame, with yellow chain eyes top and bottom, for the quay face a ferry berths against.
Terminal floor tile, 4 m (Ferry Terminal and Harbour Crossing)
Polished concourse floor tile 4 m square with a blue inlay band and a charcoal movement joint, for the passenger terminal floor. Ports on all four edges so a concourse tiles to any size.
Marshalling lane tile, 4 m (Ferry Terminal and Harbour Crossing)
Asphalt marshalling tile 4 m square with two white lane lines 3.2 m apart and a yellow stop bar, for laying out the queueing lanes of a vehicle ferry yard. Ports on all four edges so the yard tiles to any size.
Marshalling lane tile with hatched chevrons (Ferry Terminal and Harbour Crossing)
The same 4 m asphalt marshalling tile marked as a keep clear area: yellow chevrons across the full width between the lane lines, for the no waiting square in front of a linkspan or a barrier.
Quay coping tile, 4 m (Ferry Terminal and Harbour Crossing)
Quay edge slab 4 m along the quay and 3 m deep with a galvanised edge angle, a yellow safety line set back from the lip and two recessed tie down pockets. Ports at both ends so a quay runs to any length.
Harbour water tile, 8 m (Ferry Terminal and Harbour Crossing)
Flat harbour basin tile 8 m square and 0.12 m thick, in dark green harbour water, for filling the berth around a ship. Laid at y=-0.12 its surface sits exactly on y=0, level with the quay the terminal stands on.
Club Agility Course and Training Field (Dog Agility and Training Field)
A 24 x 24 m club training field with a 15 x 12 m ring roped off on it and a full agility course set out inside in running order: the start timing gate at the entry gate, two hurdles, the A frame, twelve weave poles, the dog walk, a rigid tunnel curving out of the dog's line...
Boundary Tree Clump (Dog Agility and Training Field)
Three broadleaf trees of different heights on one patch of bare earth, the planting a training field has along its boundary. Static; the canopy is faceted solid geometry with no billboards or alpha cards.
Boundary Hedge Section (Dog Agility and Training Field)
A 2 m run of clipped boundary hedge at 1.3 m on a strip of bare earth, ported at both ends so a field boundary runs to any length. Static.
Club Noticeboard (Dog Agility and Training Field)
A timber noticeboard on two posts with a glazed face and four abstract sheets pinned behind it, the running orders and class lists a club posts at the field gate. The sheets are blank panels, so a project can put its own artwork on them. Static.
Field First Aid Point (Dog Agility and Training Field)
A 1.5 m post with a green first aid box on it, marked with a white and green cross, the point a club sets at the handler end of the field. Static: the box is modelled closed.
Equipment Store Rack (Dog Agility and Training Field)
A 2.6 m open steel rack for the club's spare kit: jump bars on the lower shelf, wing panels stood on edge above and weave poles standing in the top. Static.
Rosette and Trophy Table (Dog Agility and Training Field)
A 1.5 m presentation table with a red cloth, five ribbon rosettes laid out on it and three cups behind them. Static; the rosette ribbons are solid, not cloth.
AnimatedTraining Club Shed (Dog Agility and Training Field)
A 3.2 x 2.4 m timber club shed on a concrete pad, 2.75 m to the ridge, with a blue braced door on the front, a window on the gable end and a yellow board beside the door. The door is one node on its hinge jamb, so the clip opens and closes it about the real hinge.
Lead Rack and Handler Kit Bag (Dog Agility and Training Field)
A 1.45 m timber A rack with four coiled leads on it, a treat pouch and clicker on the lower rail and a kit bag at its foot. Static: the leads are solid coils, because webbing hangs and a rigid node cannot carry that.
AnimatedGrooming Table (Dog Agility and Training Field)
A 1.1 m rubber topped grooming table at 0.78 m on four castors, with a clamped grooming arm and noose and a kit box on the top. The castors are nodes on their own axles; the arm is static, because it is set by hand and clamped.