Free models · Game-ready GLB
Animated
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,425 free GLB models
AnimatedService Lift Cage (Rocket Launch Pad and Gantry)
A 12 m service lift: a lattice hoistway on a concrete pad with a caged car parked at the bottom landing, a gate that opens and the winch housing at the head. The car is modelled at rest and does not travel.
AnimatedFuelling Arm (Rocket Launch Pad and Gantry)
A cryogenic fuelling arm on a pivot column: a box girder carrying two insulated transfer lines out to a quick disconnect head, with a counterweight box and a handrail. The head retracts along the arm and the arm then swings away.
AnimatedCrew Access Arm (Rocket Launch Pad and Gantry)
A 9.6 m crew access arm on a pivot column: a trussed walkway with handrails leading to a white room with a sealing collar, a window and a plant box. The whole arm is one node and swings back away from the vehicle.
AnimatedGantry Swing Platform (Rocket Launch Pad and Gantry)
A gantry access platform on a hinge column: a 6.6 m grated deck whose two arms close round a 4 m vehicle, handrails on every free edge and raking struts back to the column. The deck is one node and swings clear about the column.
AnimatedGantry Base Section (Rocket Launch Pad and Gantry)
The bottom 6 m of the service gantry: a 5.2 m lattice bay on four concrete footings, a grated deck and handrails at the top, an access stair off the back and a plant room at the foot with a door that opens.
AnimatedLaunch Mount with Clamps (Rocket Launch Pad and Gantry)
The launch mount: a ring deck 11.5 m across on six columns over the trench mouth, railed all round, with a yellow kick ring for the vehicle skirt and four hold down clamps on hinge posts that swing clear at release. Umbilical plate and cryogenic risers on one flank.
AnimatedPhysio Bed (Velodrome and Track Cycling)
A 1.9 m portable physio bed with a blue base, a white pad and a head section that is a named node and lifts on its hinge. Empty, made up and unoccupied: there are no people in this pack.
AnimatedSpares Crate (Velodrome and Track Cycling)
A wheeled blue spares crate 0.9 m long with a charcoal lid hinged along its back edge and banding round the body. The lid and the two castor pairs are named nodes. Closed and empty.
AnimatedMechanics Bench with Tools (Velodrome and Track Cycling)
The track centre workbench: a 2 m charcoal carcass with a timber top, two tool drawers, a vice, a parts tray and hand tools hung on a rail over it. The left drawer is a named node on its runners.
AnimatedTrack Pump (Velodrome and Track Cycling)
A floor standing track pump 1.25 m tall: a weighted foot with a step plate, a steel barrel with a yellow collar, a pressure dial and a T handle that is a named node and strokes down the barrel. The hose is a solid strip and does not move.
AnimatedTurbo Trainer (Velodrome and Track Cycling)
A direct drive turbo trainer standing empty: splayed charcoal feet, a resistance unit body with a red cover and a steel drive drum that is a named node and spins. No bicycle is fitted, so it can be paired with any of the three bicycles.
AnimatedTrack Bicycle on a Work Stand (Velodrome and Track Cycling)
The track bicycle held clear of the floor in an A frame rear wheel stand, which is how it sits for a gear change or a wash. Both wheels are named nodes and spin freely. Riderless, and the chain is one solid strip that does not move.
AnimatedTrack Bicycle (Leaned) (Velodrome and Track Cycling)
The same track bicycle tipped 15 degrees onto its side, as it stands leaned against a rail or a barrier. The wheels are still named nodes and still roll. Riderless, and the chain is one solid strip that does not move.
AnimatedWarm Up Roller Set (Velodrome and Track Cycling)
A three drum roller set for warming up on: a low charcoal frame, two rear drums and one front drum on steel rails, with the belt between them modelled as a solid strip. Each drum is a named node on its own axle and spins. 1.5 m long.
AnimatedTrack Bicycle (Upright) (Velodrome and Track Cycling)
A fixed gear track bicycle standing upright on both wheels: steel frame, drop bars, one chainring and no brakes. Both wheels are named nodes on their own axles. Riderless, and the chain is one solid strip that does not move.
AnimatedLap Board and Stand (Velodrome and Track Cycling)
The laps to go board on its stand: a two post frame with a blank white card and a hinged charcoal leaf over it that flips on the head rail. The number face is a plain white block, so a project can letter it however it likes.
AnimatedBell on a Stand (Velodrome and Track Cycling)
The bell rung for the last lap, hung from a two post stand 1.6 m up: a brass coloured bell with a clapper ball, on a named node at the head rail so the whole bell rocks. The stand is ballasted and the bell is struck by hand, so nothing else moves.
AnimatedTiming Hut (Velodrome and Track Cycling)
The trackside timing hut: a 3 by 2.4 m cabin with a long glazed window to the track, a charcoal roof, a step at the door and a blank red fascia band. The door is a named node on its hinge stile. Empty inside and unlit.
AnimatedJudges Tower (Velodrome and Track Cycling)
The raised officials tower on the home straight: a concrete base, four steel legs, a glazed cabin 3.3 m up with a run of steps to its door, and a flat roof deck. The cabin door is a named node on its hinge stile. Unlit and unoccupied.
AnimatedStarting Gate with Holder Frame (Velodrome and Track Cycling)
The wheeled frame that holds a bicycle upright for a standing start: a ballasted base on castors, two uprights and a head rail, with a hinged holder arm that lifts clear to release. The arm is a named node on the head rail pivot.
AnimatedYard store container, 6 m (Shipyard and Dry Dock)
A 6 m steel store container with corrugated sides, corner castings, a plywood lined floor and twin doors on cam locking bars, marked only with an invented blank panel. Both doors swing open.
AnimatedSite office cabin (Shipyard and Dry Dock)
A 6 m portable site office on a steel chassis: profiled cladding, two double glazed windows, a hinged half glazed door with a railed step, a blank name board and a roof with a gutter. The door opens.
AnimatedMess and drying room cabin (Shipyard and Dry Dock)
The same 6 m cabin fitted out as a mess room: one long window band over the tables, a closed serving hatch with a shelf under it, a blank notice board and the same hinged door with its railed step.
AnimatedSite tool store cabinet (Shipyard and Dry Dock)
A heavy steel tool store 1.6 m wide on a forkable plinth, with two locking doors, a shelf of power tools and hand tools inside, a hasp and a blank asset plate. Both doors swing open.