Free models · Game-ready GLB
Exterior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,764 free GLB models
Promenade railing section (Amusement Arcade and Seaside Pier)
The heavier seafront railing at the top of the beach: turned cast iron standards, a tubular top rail, a mid and kick rail, and a roundel in each of the four bays. It couples to the pier railing on the same ports.
Pier bench (Amusement Arcade and Seaside Pier)
The bench that faces out to sea: four timber seat slats and three back slats on two scrolled cast iron ends with a roundel in each, 1.8 m long and facing +Z.
Pier end platform (Amusement Arcade and Seaside Pier)
The same deck bay widened into the lookout at the seaward end: a boarded bullnose on an iron kerb beyond the last bearer, with a run of railing standing on it so the pier stops at something rather than at nothing.
Pier deck module (Amusement Arcade and Seaside Pier)
The 4 m square bay a pleasure pier walks out on: two edge stringers and five bearers carrying a run of separate weathered deck boards with the gaps between them, and a nosing board along each end.
Pier railing section (Amusement Arcade and Seaside Pier)
A 4 m run of the pier railing: two standards with ball finials, a moulded top rail, a mid rail and a kick rail, and ten turned balusters between them, in the pier's bottle green cast iron.
Pier leg frame (Amusement Arcade and Seaside Pier)
The cast iron trestle under one deck bay: two raking leg pairs on their base plates, cross braced in the panel and braced again along the pier, with head beams at 2.6 m and a weed line up the legs where the sea reaches them.
Timber Boundary Fence Bay (Caravan Park and Campsite)
One 2 m bay of post and rail boundary fence: two pointed posts carrying two rails and a top rail, ported at both ends so bays run round a field. Static geometry.
Boundary Hedge Section (Caravan Park and Campsite)
A 2 m section of clipped boundary hedge, 1.45 m tall with an uneven crown, ported at both ends so sections run nose to tail round a site. Static geometry.
Boundary Tree Clump (Caravan Park and Campsite)
A clump of two broadleaf trees and a shrub on one base, 3.8 m across and 3.5 m tall, for the boundary of a park or the far side of a hedge. Static geometry.
Site Floodlight Column (Caravan Park and Campsite)
A 4.75 m galvanised lighting column on a concrete base with a blue collar and a single floodlight head aimed down the track. The lens is plain emissive free geometry: the pack ships no lights, so a consumer adds its own.
Site Entrance Sign (Caravan Park and Campsite)
A 2.8 m painted entrance sign on two timber posts: a blue board with the park name and opening times blocked out in white and an orange strap line under them, of the kind that stands beside the barrier. Static geometry.
Site Noticeboard (Caravan Park and Campsite)
A 1.9 m site noticeboard on two timber posts: a white backing board under a small pent roof with pinned notices on it. Static geometry.
Playground Slide (Caravan Park and Campsite)
A 2.2 x 4.2 m playground slide on a safety mat: a galvanised platform at 1.5 m with a ladder up the back and blue grab rails, and an orange slide bed with raised sides running down to a run out at the front. Static geometry.
Entrance Barrier (Caravan Park and Campsite)
A 4.2 m site entrance barrier: a galvanised pedestal on a concrete base with a striped arm and a counterweight, and a drop leg under the far end. The arm is one node on the pedestal axis, so the clip tilts it up to let a tourer through and drops it again. The pedestal is fixed.
Playground Swing Set (Caravan Park and Campsite)
A 4.8 m two bay swing frame on a safety mat: galvanised A frames, a top bar and two seats on chains. Each seat is its own node pivoted on the top bar, so the clip rocks both seats through their arc. The frame and the mat are fixed.
Gas Bottle Cage (Caravan Park and Campsite)
A 1.9 x 1.2 m galvanised gas bottle cage on a concrete pad: mesh panels in a framed cage with a warning sign, five exchange bottles inside and a framed mesh door. The door opens and shuts; the bottles are fixed.
Bin and Recycling Store (Caravan Park and Campsite)
A 2.4 m slatted timber bin and recycling store on a concrete pad, with a blue and an orange wheeled bin inside and labelled panels on the front. The top is one node hinged along its back edge, so the clip lifts the lid and drops it shut. The bins themselves are fixed.
Site Shop and Reception Cabin (Caravan Park and Campsite)
A 4.6 x 3.4 m timber clad site shop and reception: a serving window under an orange canopy, a glazed entrance door, a blue fascia sign, a gas bottle for exchange and an A board on the apron. The door is one node and opens; the canopy and the A board are fixed.
Laundry Room Module (Caravan Park and Campsite)
A 3 m laundry end for the shower block: the same render and apron under a lower mono pitch roof, a vent panel, a high light at the back and a blue door. It is ported on its open west face, so it butts onto the block and reads as one building. The door opens and shuts.
Washing Up Sinks under a Canopy (Caravan Park and Campsite)
A 3.2 x 2 m washing up point: two stainless bowls and their taps set in a white counter with a splashback and a draining shelf, under an orange canopy on four posts, on its own concrete apron. Static geometry; the taps are modelled shut.
Shower and Toilet Block (Caravan Park and Campsite)
A 7.2 x 4.4 m site shower and toilet block: rendered walls on a concrete apron, high frosted lights, a pitched roof and two signed entrances with an orange leaf in each. Each door is its own node, so the shower side and the toilet side open separately. Ported at both ends.
Awning Ground Mat (Caravan Park and Campsite)
A 3 x 2.4 m breathable awning mat with woven stripes and bound ends, laid under a porch awning or in front of a tent door. It is 30 mm thick, so it reads on grass without floating. Static geometry.
Cool Box (Caravan Park and Campsite)
A 0.62 m rigid cool box with a white lid, a moulded catch and a grab handle each end. The lid is one node hinged along its back edge, so the clip lifts it and shuts it again.
Camping Storage Crate (Caravan Park and Campsite)
A 0.6 m stacking storage crate with ribbed sides, a clip on lid and moulded hand holds, for the boxes that come out of a car boot onto a pitch. Static geometry; the lid is modelled clipped shut.