Free models · Game-ready GLB
Stylized
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,613 free GLB models
GSE Store (Airport Terminal and Ground Operations)
Ground equipment store: a three bay open-fronted shed on a paved slab, with piers between the bays, a mono-pitch ribbed roof with a coloured fascia and edge rail, racking along the back wall, bay markings and a wall display.
Hangar Frontage (Airport Terminal and Ground Operations)
Maintenance hangar frontage: a gabled shed with a real bored door opening, six folding door leaves with glazed upper panels, a coloured header band, a threshold strip, side walls and a ribbed roof deck.
Control Tower (Airport Terminal and Ground Operations)
Airfield control tower: a two storey glazed base block with an entrance canopy, a tapered shaft carrying a spiral stair band, and an outward-raked glazed cab with mullions, a service gallery with railings, roof antennas and a mast light.
Stand Guidance Display (Airport Terminal and Ground Operations)
Visual docking guidance display: a two post frame carrying a large dark alignment screen with a centre bar and closing-rate strip, a coloured header hood and a ground level operator panel.
Safety Cone Row (Airport Terminal and Ground Operations)
Airside cone row: five square-based traffic cones at 1.2 m centres with reflective collars and linking tapes, for closing a lane or fencing a spill on the apron.
Marshalling Wand Pair (Airport Terminal and Ground Operations)
Marshalling wand pair in a charging cradle: two illuminated amber batons with dark grips standing in a weighted base with a status light, as they are left at the head of a stand.
Wheel Chock And Cone Set (Airport Terminal and Ground Operations)
Landing gear chock and cone set: a linked pair of moulded amber chocks with grip plates and a pull rope, and two square-based traffic cones with reflective collars, arranged as they are placed at a wheel.
Apron Floodlight Mast (Airport Terminal and Ground Operations)
Twelve metre apron floodlight mast: a tapered pole on a cast pad with a climbing ladder, a head frame carrying five raked floodlights, a rear walk rail and a red obstruction light on the crown.
Jet Blast Fence (Airport Terminal and Ground Operations)
Eight metre jet blast deflector fence: five braced portal posts on pad bases carrying nine angled louvre panels, a coloured capping rail with obstruction lights and a chevron kick band along the base.
Apron Paving Tile (Airport Terminal and Ground Operations)
Eight metre plain apron paving tile: the same scored slab with bay joints and a single corner reference patch and no route markings, for filling the open apron between marked stands and taxiways.
Taxiway Sign (Airport Terminal and Ground Operations)
Frangible taxiway guidance sign: a low double-sided board on two breakaway posts with a yellow direction panel and a dark mandatory panel divided by a white bar, with blank legend blocks.
Taxiway Tile Curve (Airport Terminal and Ground Operations)
Eight metre quarter turn taxiway tile: the same slab with a curved centreline and curved double edge lines swinging a route from travel along X to travel along Z, with inset lights on the inner shoulder.
Taxiway Tile (Airport Terminal and Ground Operations)
Eight metre straight taxiway paving tile: a scored slab with a painted centreline, double edge lines and four inset edge lights, laid on the apron port grid.
Stand Marking Tile (Airport Terminal and Ground Operations)
Eight metre aircraft stand paving tile: a scored concrete slab painted with a lead-in line, a stop bar and turn bar, hatched equipment restraint areas either side, safety lines and an outlined equipment parking box.
AnimatedDe Icing Rig (Airport Terminal and Ground Operations)
De-icing rig: a three axle chassis with a glazed amber cab, twin insulated fluid tanks, a heater and pump box, and a two section telescopic boom on named pivots carrying an enclosed operator basket with a spray nozzle.
AnimatedApron Bus (Airport Terminal and Ground Operations)
Low floor apron transfer bus: a wide flat sided body with a deep window band, twin plug doors on named pivots, a destination panel, a driving position with a named steering wheel, interior stanchion seats and three axles of named road wheels.
AnimatedJet Bridge (Airport Terminal and Ground Operations)
Two section telescoping passenger boarding bridge: a fixed terminal rotunda and inner tunnel, a named outer tunnel with a glazed window band, a named wheeled lift bogie on twin columns and a named rotating cab with a canopy lip and threshold plate.
AnimatedAir Start Unit (Airport Terminal and Ground Operations)
Towable air start unit: a low turbine housing with louvred sides, an exhaust stack with a rain cap, a control panel, a large coiled delivery duct with reinforcing bands on the front deck, two road wheels, a jockey wheel and a named drawbar.
AnimatedPassenger Air Stairs (Airport Terminal and Ground Operations)
Self-propelled passenger air stairs: a chassis with an amber engine bay and canopied driving position, and a twelve tread flight on a named lift pivot carrying a railed top platform under a canopy roof.
AnimatedGround Power Unit (Airport Terminal and Ground Operations)
Towable diesel ground power unit: a sound attenuated canopy with louvred vents, an exhaust stack and beacon, a control panel with a status screen, an output cable reel with a coiled lead, two road wheels, a jockey wheel and a named drawbar.
AnimatedFuel Bowser (Airport Terminal and Ground Operations)
Apron refuelling bowser: a three axle tanker with a glazed amber cab, an elliptical barrel with rolling hoops, a top walkway with rails and a fill hatch, and a rear pumping cabinet with twin hose reels, a meter panel and a chevron bumper.
AnimatedLavatory Service Truck (Airport Terminal and Ground Operations)
Lavatory service truck on the same chassis: the barrel is replaced by a boxed waste tank with a capped roof, a rear service panel, a large flush hose reel and a suction hose stowed across the tail.
AnimatedPotable Water Truck (Airport Terminal and Ground Operations)
Potable water service truck: a two axle chassis with a glazed cab, a horizontal stainless barrel with a top fill hatch, a pump and hose cabinet, a rear coupling box and a small railed working platform.
AnimatedCatering Truck (Airport Terminal and Ground Operations)
High lift catering truck: a three axle chassis with a glazed cab, a four leg scissor stack on a named pivot and an insulated box body on a named node, raised to door height with a front loading platform, roller door opening and safety rails.