Free models · Game-ready GLB
Animated
Every stylized model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
424 free GLB models
AnimatedCool Box (Caravan Park and Campsite)
A 0.62 m rigid cool box with a white lid, a moulded catch and a grab handle each end. The lid is one node hinged along its back edge, so the clip lifts it and shuts it again.
AnimatedCamper Van (Caravan Park and Campsite)
A 5.4 m panel van conversion: a cab with a raked windscreen and grille, a living body with tinted windows and an orange flash, a stowed elevating roof with a rack, and a sliding side door. The door slides and the four wheels roll; the roof is stowed and does not rise.
AnimatedFolding Trailer Tent (Caravan Park and Campsite)
A folding trailer tent set up on its pitch: a box trailer on two wheels with a drawbar, coupling head and jockey wheel, the canvas pitched as a ridge over the bed with a doorway and a ladder. The wheels roll; the canvas is fixed, because fabric cannot be folded rigidly.
AnimatedStatic Caravan, Sunset Livery (Caravan Park and Campsite)
The static caravan in the park's second livery: the band under the eaves is painted orange instead of blue, so a row of holiday homes reads as more than one unit. The geometry is unchanged and the door opens the same way.
AnimatedTouring Caravan (Caravan Park and Campsite)
A 4.4 m two berth touring caravan on a single axle: a chamfered body with a rooflight, tinted windows, a blue side flash, a near side door with a step, and an A frame with a coupling head, gas bottle and jockey wheel. The door opens and the wheels roll; the coupling is fixed.
AnimatedStatic Caravan on Blocks (Caravan Park and Campsite)
An 8.2 x 3.2 m static holiday caravan on concrete piers with a boarded skirt, a shallow pitched roof, tinted lounge and bedroom lights, a livery band under the eaves and timber steps to the door. The door is one node on its hinge stile and swings open.
AnimatedStatic Caravan with Timber Decking (Caravan Park and Campsite)
The same static sited for a long season: a timber deck runs the length of the front with a slatted balustrade round two sides and three steps down to the pitch, so the door opens onto boards rather than grass. The door still opens; the deck and the balustrade are fixed.
AnimatedBird Scarer on a Pole (Allotments and Community Garden)
A 1.9 m pole with four arms of old discs and cut plastic streamers on the head, turned by the wind over a sown bed. The head is one node on the pole, so the clip spins the whole spider; the streamers do not flutter on their own.
AnimatedCommunal Tool Store (Allotments and Community Garden)
The site's shared store: a 3 x 2 m timber building 2.3 m at the front under a corrugated pent roof, with a wide braced door and a padlock. The door is one node on its hinge stile; the roof sheets and the padlock are fixed.
AnimatedSite Gate with Padlock (Allotments and Community Garden)
A 2 m allotment site gate: a four rail braced timber leaf hung between two 1.46 m capped posts, with a hasp and a padlock on the closing stile. The leaf is one node on its hinge post, so the clip swings it; the padlock is modelled shut and does not open.
AnimatedChicken Coop with Run (Allotments and Community Garden)
A raised timber coop 1.16 m across on 0.42 m legs with a felt gable roof, a pop hole and ramp, and a 1.7 x 1.1 m netted run on the end. The nest box hatch is one node hinged on its head; the netting, ramp and pop hole are fixed.
AnimatedHose Reel on a Post (Allotments and Community Garden)
A hose reel on a galvanised bracket bolted to a 0.94 m post, wound with 0.22 m coils and a crank on the side, with the free end run off across the ground. The reel is one node on its axle so the clip spins it; the hose itself is a rigid solid and does not pay out.
AnimatedWheelbarrow (Allotments and Community Garden)
A galvanised builders barrow with timber handles, a stub axle and two leg stands, 1.5 m over the handles. The wheel is one node on the axle, so the clip rolls it; the barrow itself does not tip.
AnimatedAllotment Shed, Patched and Weathered (Allotments and Community Garden)
The same shed after a few hard winters: corrugated sheet nailed over the rotted boards, a patch on the felt, moss growing on the roof, a plank propped against the corner and the paint gone from the door. The door still opens; the propped plank and the patches are fixed.
AnimatedTimber Framed Greenhouse (Allotments and Community Garden)
A 2 x 2.6 m cedar framed greenhouse, 1.5 m to the eaves and 2.26 m to the ridge, glazed all round and over, with staging and pots inside and a side hung door. The door is the only moving part; the roof vents are fixed lights.
AnimatedHomemade Allotment Shed (Allotments and Community Garden)
A 2 x 1.6 m homemade timber shed on bearers, 2.05 m at the front falling to 1.72 m at the back under a felt pent roof, with a painted door, a glazed window and a trodden earth step. The door is one node on its hinge stile, so the clip swings it open and shut.
AnimatedSlatted Timber Compost Bin (Allotments and Community Garden)
A 1 m square timber compost bin 0.86 m high, four corner posts with slatted sides and a heap of half rotted material in it, closed by a hinged board lid. The lid is one node on the back edge; the slats are fixed.
AnimatedCold Frame (Allotments and Community Garden)
A 1.3 x 0.86 m timber cold frame, 0.52 m at the back falling to 0.3 m at the front, sown with two short rows and closed by a single glazed light. The light is one node hinged on the back board, so the clip lifts it and drops it back.
AnimatedPlastic Dalek Compost Bin (Allotments and Community Garden)
The council issue plastic compost bin: a 0.94 m tapered black cone with moulded rings, a hatch at the foot for taking compost out and a lift off lid modelled as a hinged node. The hatch is fixed geometry.
AnimatedEntrance barrier with lifting arm (Recycling Centre and Waste Transfer Yard)
Site entrance barrier: a charcoal cabinet on a bolted base with an orange access door and a blue notice plate, and a 4 m steel arm banded in orange with a charcoal end block, tilting up clear of the queue lane.
AnimatedConveyor feed hopper (Recycling Centre and Waste Transfer Yard)
Feed hopper and short belt on a charcoal lattice stand 3.4 m tall: a steel hopper with sloped walls and a yellow rim, an inclined belt running out of its throat on three rollers that spin, and a guarded head drive.
AnimatedVertical baler (Recycling Centre and Waste Transfer Yard)
Vertical mill size baler 2.2 m wide and 3.2 m tall: a green chamber on a charcoal frame with a steel platen head, a yellow charging lid that lifts, a blue control box with modelled buttons and a finished bale on the discharge floor.
AnimatedSkip lorry with hook arm (Recycling Centre and Waste Transfer Yard)
Two axle hook loader lorry 7.6 m long: an orange day cab with a charcoal screen and a steel bumper, a charcoal chassis with the subframe and rear rollers, six wheels that roll and a hook arm that tilts up to lower a skip off the back.
AnimatedYard wheel loader with tipping bucket (Recycling Centre and Waste Transfer Yard)
Articulated wheel loader 6.6 m long: an orange rear body with the engine hood, counterweight and exhaust, a charcoal glazed cab under a steel roof, a front body on the articulation joint, four wheels that roll, and a boom that raises with a toothed bucket that tips.