Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,478 free GLB models
High back snug settle (Bar, Pub and Brewery Taproom)
A 1.4 m high back snug settle: a panelled bench base with a piped seat pad, a deep buttoned back pad under a fielded panel field, scrolled arms on turned posts and a moulded cresting rail with a shelf.
Hanging stemware rack (Bar, Pub and Brewery Taproom)
A hanging stemware rack: four lipped channels in a welded stainless frame at the bottom, carried on four drop rods rising to domed ceiling plates.
Pub booth, two cover (Bar, Pub and Brewery Taproom)
The pub booth at two cover width: the same panelled benches, buttoned back pads and capping rails around a narrower cast-iron pedestal table.
Bottle skip on castors (Bar, Pub and Brewery Taproom)
A cellar bottle skip: a tapered moulded tub with a rolled stainless rim on four braked castors, a rubber crushing mat lining the floor and a tow handle at one end.
Pub booth, four cover (Bar, Pub and Brewery Taproom)
A 1.5 m four cover pub booth: two panelled benches with piped seat pads, buttoned upright back pads on panelled boards, moulded capping rails and a cast-iron pedestal table with a bullnose timber top.
Back bar lightbox (Bar, Pub and Brewery Taproom)
A back bar lightbox: a shallow case in a moulded brass frame with a blank illuminated face and a small uplight bar. The face carries no artwork or wording.
Wine display rack (Bar, Pub and Brewery Taproom)
A 920 mm wine display rack: five shelf boards crossed by twelve diagonal lattice pairs forming diamond bottle bins on a boarded back, with a dark plinth and a moulded top.
AnimatedBack bar base cabinet (Bar, Pub and Brewery Taproom)
A 1.2 m low back bar cabinet: a recessed plinth, two fielded doors with brass knobs, two drawers with a pair of knobs each and a bullnose timber top.
Optic rail with measures (Bar, Pub and Brewery Taproom)
A back bar optic rail: a timber frame carrying six inverted spirit bottles in cradles, each on a chrome measure chamber with a sight window and a push lever, over a stainless drip lip. All bottles are unlabelled.
Back bar glass shelf run (Bar, Pub and Brewery Taproom)
A back bar bay of five toughened glass shelves on brass pin brackets against a mirrored back, each with a slim brass light strip beneath it.
AnimatedBack bar bottle fridge bay (Bar, Pub and Brewery Taproom)
A back bar bay with a glazed bottle fridge in the base: two glass doors on barrel hinges with bar handles over three wire shelves, a louvred grille, and two display shelves with gallery rails and a blank lit sign band above.
Back bar spirit shelf run (Bar, Pub and Brewery Taproom)
An open back bar bay: four deep timber spirit shelves on shaped brackets against a boarded back, each with a brass gallery rail, over the panelled base and under the moulded cornice.
AnimatedBack bar mirrored bay (Bar, Pub and Brewery Taproom)
A back bar bay built around a tall framed mirror: a panelled base cabinet with fielded doors, a bullnose worktop, a moulded mirror frame, a single display shelf with a brass gallery rail and a moulded cornice above.
AnimatedBack bar bottle steps bay (Bar, Pub and Brewery Taproom)
A full height back bar bay of bottle steps: a panelled base cabinet with fielded doors and brass knobs, a bullnose worktop, four stepped display tiers with moulded nosings and brass gallery rails against a mirrored back, framed by turned pilasters under a moulded cornice.
Cask tap and mallet (Bar, Pub and Brewery Taproom)
A cellar tapping set: a brass cask tap with a shouldered barrel, a key lever and a spout, laid beside a turned beech mallet with a shaped handle.
Keg sack barrow (Bar, Pub and Brewery Taproom)
A cellar sack barrow for kegs: a tube frame with sleeved grips, three cross braces, a folded toe plate, stair skids and two pneumatic wheels.
Keg coupler head (Bar, Pub and Brewery Taproom)
A keg coupler head: a cast body with a bayonet collar, a probe, a hinged lever handle and gas and beer barbs on their elbows.
Recirculation beer cooler (Bar, Pub and Brewery Taproom)
A flooded recirculation beer cooler: an insulated tub with a lifting lid, the compressor and pump head on top, a lagged flow and return elbow and a membrane control panel.
Line cleaning bottle (Bar, Pub and Brewery Taproom)
A pressurised line cleaning bottle: a moulded stainless body with a strap handle and screw cap, a plain blank collar band and a coupler hose falling to the floor.
AnimatedCellar cooler unit (Bar, Pub and Brewery Taproom)
A wall-hung cellar cooling unit: a stainless case with two guarded fans and bladed impellers, a louvred return grille, insulated pipework rising from the top, a control fascia and a hinged access door.
Gas cylinder rack (Bar, Pub and Brewery Taproom)
A cellar gas rack: a base tray with a raised lip, two uprights and a head rail, two carbon dioxide cylinders with shoulder valves and handwheels, and two retaining chains across them.
Python cooler line coil (Bar, Pub and Brewery Taproom)
A coiled insulated python: a lagged trunk sheath in three turns with taped clamps, cut open at one end to show six product lines around the coolant flow and return.
Thirty litre keg (Bar, Pub and Brewery Taproom)
A 30 litre stainless keg on the same construction as the 50 litre: rolled chimes, handle webs, a bilged body and a recessed spear well, at the shorter cellar height.
Pin cask (Bar, Pub and Brewery Taproom)
A pin cask on the same staved construction as the firkin: bilged body, four hoops, shive and keystone, at half the length.