Free models · Game-ready GLB
Modern
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
14,038 free GLB models
AnimatedGarment conveyor rail unit, warm run (Dry Cleaners and Alterations Shop)
The loaded unit with the garments recoloured into the warm half of the palette, so a long run of rail does not repeat the same four colours down the shop. Geometry, ports and clips are identical.
AnimatedGarment conveyor rail unit, loaded (Dry Cleaners and Alterations Shop)
A 1.6 m bay of the powered rail a cleaner stores finished work on: two posts, a head channel with a teal band, the rail at 2.0 m with seven carrier hooks, a chain drive wheel on the left post and seven bagged garments hanging from it.
Drop off counter module (Dry Cleaners and Alterations Shop)
The same body and the same ports without the pay point: a teal lay down pad for incoming work, a bagging hoop with two covered garments on it and a spike of blank job tickets, which is what a run repeats between till modules.
AnimatedGarment conveyor rail unit, part loaded (Dry Cleaners and Alterations Shop)
The same unit with three garments left on it, for the end of a run, a collected bay or a shop part way through a busy afternoon. Identical geometry, ports and drive wheel to the loaded unit.
AnimatedService counter module with till and card reader (Dry Cleaners and Alterations Shop)
The 1.2 m pay point of the counter run: an enamelled carcass on a charcoal plinth with a teal fascia and a stainless deck, carrying a register on a raised plate, a customer display on a stub column, a card reader on a gooseneck and a cash drawer on runners.
Recycling centre and waste transfer yard (Recycling Centre and Waste Transfer Yard)
A working public recycling centre and its transfer yard, 28 m by 20 m on a ported concrete slab. Down the left hand side the public tip runs off a three section raised platform with its access stair, open top skips in three sizes backed under the tipping edge, two of them...
Towable water bowser (Recycling Centre and Waste Transfer Yard)
Site water bowser 2.6 m long on a charcoal chassis with a drawbar and jockey wheel: a blue tank with steel bands and a filler hatch, a yellow hose box on the drawbar and two road wheels, for damping down the yard.
High visibility bollard (Recycling Centre and Waste Transfer Yard)
Impact bollard 1.05 m tall guarding a bring bank or a cabin corner: an orange sleeved post on a concrete pad with two steel bands and a charcoal cap.
Yard fire point (Recycling Centre and Waste Transfer Yard)
Free standing fire point 1.4 m tall: an orange backboard on a charcoal stand with a steel base tray, two extinguishers with charcoal heads, a blue call point plate and a yellow instruction notice, all blank of wording.
Traffic cone (Recycling Centre and Waste Transfer Yard)
Standard 0.75 m road cone: an orange faceted cone on a charcoal moulded base with two steel reflective bands, for closing a bay or a lane in the yard.
Site safety sign set on a post (Recycling Centre and Waste Transfer Yard)
Three sign plates on one charcoal post standing 2.2 m: a yellow warning triangle, a blue mandatory disc and a green site rules board with modelled rule bars, all blank of wording, on a bolted base plate.
Site mesh fence gate, 4 m, standing open (Recycling Centre and Waste Transfer Yard)
The same 4 m fence module built as the vehicle gate with its leaf swung back against the run: a hinge post, a latch post with a keep and a drop bolt socket, and the mesh leaf standing open across 75 degrees so the drive reads as open.
CCTV camera pole, 4.5 m (Recycling Centre and Waste Transfer Yard)
Yard surveillance pole 4.5 m tall: a charcoal column on a concrete pad with an orange collar, a steel swan neck bracket, a bullet camera with a steel sunshield and a blue notice plate at eye level.
Yard floodlight mast, 6 m (Recycling Centre and Waste Transfer Yard)
Yard lighting column 6 m tall: a charcoal mast on a bolted base plate over a concrete pad, an orange inspection collar, and a head frame carrying three floodlights with yellow lenses tilted down over the working area.
Site mesh fence panel, 4 m (Recycling Centre and Waste Transfer Yard)
Welded mesh boundary fence module 4 m wide and 2.1 m tall: galvanised mesh in a charcoal frame between two posts on precast concrete feet, with a green site notice plate bolted to one post and side ports on the centre line.
AnimatedEntrance barrier with lifting arm (Recycling Centre and Waste Transfer Yard)
Site entrance barrier: a charcoal cabinet on a bolted base with an orange access door and a blue notice plate, and a 4 m steel arm banded in orange with a charcoal end block, tilting up clear of the queue lane.
Staff welfare cabin (Recycling Centre and Waste Transfer Yard)
The same portable cabin at 4.5 m as the yard's welfare unit: one window, a green door with a yellow step and a charcoal water tank with its steel lid and feed pipe on the roof.
Site office cabin (Recycling Centre and Waste Transfer Yard)
Portable site office 6 m long and 3 m tall on concrete blocks: steel clad with a green base band and a charcoal roof edge, two windows with sills, a green door with a yellow step and a blank blue sign panel on the front.
Wash down point (Recycling Centre and Waste Transfer Yard)
Yard wash down point 1.8 m tall: a charcoal standpipe on a concrete plinth with a yellow guard hoop, a steel hose reel with the hose coiled on it, a lance on a bracket and a blue instruction plate.
Material bay divider wall, 4 m (Recycling Centre and Waste Transfer Yard)
Precast push wall 4 m long and 2.4 m tall for dividing a transfer yard into material bays: a tapered concrete panel on a wide foot with a charcoal impact kerb, a yellow high visibility top band and end ports so bays repeat.
Yard drainage channel grate, 2 m (Recycling Centre and Waste Transfer Yard)
Slot drain for a yard slab 2 m long and 0.4 m wide: a concrete channel with a galvanised grate of eleven bars in a charcoal frame, set 20 mm proud of the running surface so a scene can lay it across a fall.
AnimatedConveyor feed hopper (Recycling Centre and Waste Transfer Yard)
Feed hopper and short belt on a charcoal lattice stand 3.4 m tall: a steel hopper with sloped walls and a yellow rim, an inclined belt running out of its throat on three rollers that spin, and a guarded head drive.
AnimatedVertical baler (Recycling Centre and Waste Transfer Yard)
Vertical mill size baler 2.2 m wide and 3.2 m tall: a green chamber on a charcoal frame with a steel platen head, a yellow charging lid that lifts, a blue control box with modelled buttons and a finished bale on the discharge floor.
Stack of baled cardboard (Recycling Centre and Waste Transfer Yard)
Six mill sized cardboard bales stacked three high, each 1.2 m by 1 m and wired with four steel bands, sitting slightly out of square the way a real stack of baled fibre does.