3DAssets.dev

Loading model

About

A working public recycling centre and its transfer yard, 28 m by 20 m on a ported concrete slab. Down the left hand side the public tip runs off a three section raised platform with its access stair, open top skips in three sizes backed under the tipping edge, two of them loaded with bagged and boxed material and garden waste, and a material signage board over each bay. A run of tipping bay blocks keeps cars off the skip line. The entrance end carries the bring banks for glass and textiles, the small electricals cage, the battery and bulb unit, the oil and paint drum bay and the reuse shop cabin with its shutter up, with bollards, bins, bag trolleys, a fire point and the water bowser around them. On the right a marked queue lane comes in through the open gate past the barrier arm and over the weighbridge, with its control cabin alongside and a skip lorry arriving. Across the back of the yard three material bays are built from ported push walls with baled cardboard and plastic stacked in them, a loaded skip at the mouth of the first, the vertical baler and the conveyor feed hopper along the right hand wall, the bulk transfer trailer parked beside them and the wheel loader working the middle bay with its bucket down. The site office and staff welfare cabins, floodlight masts, camera poles and mesh fencing close the yard in.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the asset.

Use the “Recycling centre and waste transfer yard (Recycling Centre and Waste Transfer Yard)” asset in my project.

Model: https://cdn.3dassets.dev/assets/34934/v1/model.glb
Asset page: https://3dassets.dev/assets/recycling-and-waste-transfer-yard-recycl-9dae0c82-starter-scene
Description: A working public recycling centre and its transfer yard, 28 m by 20 m on a ported concrete slab. Down the left hand side the public tip runs off a three section raised platform with its access stair, open top skips in three sizes backed under the tipping edge, two of them...

- Dimensions (X × Y × Z): 28.481 × 6.03 × 22.02 metres
- Triangles: 14.0k
- Animations: none
- Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/)
- Loading: Three.js GLTFLoader; no additional decoders required.

Also available as JSON, Markdown, or via the MCP server.

Import manually

Choose your framework, then copy the code into your project to load the asset.

import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'

const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/34934/v1/model.glb', (gltf) => {
  scene.add(gltf.scene)
})

Common questions

How do I use this model with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the model and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Three ways, from quickest to most automatic. Download the .glb with the button and drop it into your engine's asset folder, where it imports like any glTF file. Or skip the download: copy the three.js, React Three Fiber or model-viewer snippet under "Import manually", which loads the model straight from the CDN. Or connect your AI agent to the MCP server and ask for it by name, and it will find, fetch and place the model for you.

MCP server setupAPI reference

Which game engines and tools can I use this model with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. The model is a self-contained binary glTF (.glb) with textures embedded, so there is one file to import and no plugin, converter or decoder to install first.
How do I import this model into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use this model in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every model on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The .glb file has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I need Draco, Meshopt or KTX2 to load it?
No. The geometry is quantized with KHR_mesh_quantization and the textures are re-encoded to WebP, both of which three.js, Godot, Unity and Blender read natively, so a plain GLTFLoader is enough. There is nothing extra to configure and no decoder to ship with your bundle.

Recycling centre and waste transfer yard (Recycling Centre and Waste Transfer Yard)

A working public recycling centre and its transfer yard, 28 m by 20 m on a ported concrete slab. Down the left hand side the public tip runs off a three section raised platform with its access stair, open top skips in three sizes backed under the tipping edge, two of them...

Download asset · 694.7 KB

More in Environments & Scenes

Gaming Floor (Casino Floor and Back Rooms)

Gaming Floor (Casino Floor and Back Rooms)

Gaming floor demonstration: a pit of blackjack, roulette, craps and poker tables with dealer chairs and stools on patterned carpet, a slot bank and machine row beyond, a bar with back bar and lounge seating, rope stanchions marking the pit, and the cashier cage on the back...

@3dassets20.9k tris · 43 ↓
Working Fishing Harbor (Fishing Harbour and Boats)

Working Fishing Harbor (Fishing Harbour and Boats)

A complete miniature harbor with tackle shop, open boathouse, joined quay and piers, moored cabin launch, market, and fishing activity.

@3dassets46.3k tris · 42 ↓
Metro station with an island platform and units at both faces (Modern Rail and Metro Network)

Metro station with an island platform and units at both faces (Modern Rail and Metro Network)

A two track metro station: an island platform with canopies, seating, displays, a shelter, a gate line and an end ramp, slab track each side and a two car metro unit standing at each face, one with its doors open. A glazed lift shaft and a stair flight on the deck give access...

@3dassets22.5k tris · 41 ↓
Departures Concourse (Airport Terminal and Ground Operations)

Departures Concourse (Airport Terminal and Ground Operations)

A 32 by 28 metre departures concourse floored on the 4 m tile grid: a row of staffed check-in desks with self-service kiosks and bag drop units behind a managed queue, three security lanes with tray return trolleys, a gate lounge of beam seating around a gate desk, retail and...

@3dassets12.6k tris · 39 ↓
Lunar Colony Overview (Moon Base Colony and Lunar Rovers)

Lunar Colony Overview (Moon Base Colony and Lunar Rovers)

A working surface base: two tunnel junctions link a crew habitat, an inflatable dome, an observation turret, a greenhouse, a medical module, a regolith shielded habitat, an airlock and a vehicle workshop, every mate made through the hab-port interface 2.4 m above the...

@3dassets71.3k tris · 39 ↓
Resort Base Area (Ski Resort and Snow Park)

Resort Base Area (Ski Resort and Snow Park)

Base area on a 40 by 48 m tile grid: lift drive terminal with queue maze and pass gates, a 12 m cable span with two hanging chairs, lodge hall with wing, rental shop with racks, ticket office, bus stop with shuttle, groomer and slope-side furniture. Static layout; no...

@3dassets10.3k tris · 38 ↓
Checkpoint to Safehouse (Zombie Quarantine Streets)

Checkpoint to Safehouse (Zombie Quarantine Streets)

A clear3m+ inspection route through a gate and canopy towards a braced safehouse, with separated triage and supplies.

@3dassets1.4k tris · 37 ↓
Working Airfield At Dusk (Aircraft Fleet and Airfield)

Working Airfield At Dusk (Aircraft Fleet and Airfield)

A whole general aviation airfield laid out tight as one place: a 70 metre lit runway with a threshold at each end, a parallel taxiway turning north into a twenty four bay apron, a hangar built from its arch modules and closed at both ends with a light single half out of the...

@3dassets327k tris · 33 ↓
Body to Finish Line (Car Factory Production Line)

Body to Finish Line (Car Factory Production Line)

A 48 by 18 m car assembly plant built from the hall kit: nine roof trusses on twenty two steel columns, a closed back wall and both end walls with a roller shutter, a window band and personnel doors, a deck and ridge lantern roof over the back half and a mezzanine walkway...

@3dassets146k tris · 18 ↓
Framing Cell and Press Feed (Car Factory Production Line)

Framing Cell and Press Feed (Car Factory Production Line)

A single 20 by 12 m body shop cell on the plant floor: seven skid conveyor sections carry a body in white on its carrier skid through the framing gate, three welding robots work it from inside a run of yellow guarding with an access gate, and the panel racks, blank stack and...

@3dassets50.6k tris · 12 ↓
Walled Market Quarter (Fantasy MMO City And Townsfolk)

Walled Market Quarter (Fantasy MMO City And Townsfolk)

A hand painted fantasy city quarter inside a forty eight metre circuit of curtain wall, with a wall walk on corbels, arrow loops, four quoined corner towers, two round flanking towers, a postern in the west wall and the great gatehouse in the south wall, its portcullis and...

@3dassets303k tris · 11 ↓
Fortified forest outpost (FPS Survival Forest Outpost)

Fortified forest outpost (FPS Survival Forest Outpost)

A free survival game scene: a fortified scavenger outpost in dense conifer forest around a half derelict research station. A ring of timber palisade and chain link closes a 28 by 20 metre compound, with a two leaf palisade gate on the south track under a lit red lamp and...

@3dassets383k tris · 11 ↓

Similar assets

Recycling yard ground tile, 4 m (Recycling Centre and Waste Transfer Yard)

Recycling yard ground tile, 4 m (Recycling Centre and Waste Transfer Yard)

Heavy duty concrete yard module 4 m square and 100 mm thick with saw cut joints running each way, laid so its top face is the running surface, with edge ports on all four sides so a whole transfer yard repeats from it.

@3dassets72 tris
Mud tracked yard tile, 4 m (Recycling Centre and Waste Transfer Yard)

Mud tracked yard tile, 4 m (Recycling Centre and Waste Transfer Yard)

The same 4 m yard module with dried mud trodden across it: three spread patches standing a few millimetres proud of the slab and two wheel ruts run through them, for the bay mouths and the loader's working line.

@3dassets72 tris
Yard drainage channel grate, 2 m (Recycling Centre and Waste Transfer Yard)

Yard drainage channel grate, 2 m (Recycling Centre and Waste Transfer Yard)

Slot drain for a yard slab 2 m long and 0.4 m wide: a concrete channel with a galvanised grate of eleven bars in a charcoal frame, set 20 mm proud of the running surface so a scene can lay it across a fall.

@3dassets180 tris
Yard floodlight mast, 6 m (Recycling Centre and Waste Transfer Yard)

Yard floodlight mast, 6 m (Recycling Centre and Waste Transfer Yard)

Yard lighting column 6 m tall: a charcoal mast on a bolted base plate over a concrete pad, an orange inspection collar, and a head frame carrying three floodlights with yellow lenses tilted down over the working area.

@3dassets200 tris
Open top skip, 16 yard (Recycling Centre and Waste Transfer Yard)

Open top skip, 16 yard (Recycling Centre and Waste Transfer Yard)

The same open top skip at 5.2 m long and 1.6 m deep, the builder's size a transfer yard fills with timber and hardcore: identical body, rubbing rails, lifting lugs, top rail and hook bar.

@3dassets252 tris
Open top skip loaded with garden waste (Recycling Centre and Waste Transfer Yard)

Open top skip loaded with garden waste (Recycling Centre and Waste Transfer Yard)

The 8 yard skip filled with green waste: cut timber, stacked prunings and hedge trimmings modelled as neat faceted bundles with tied sacks at one end, heaped level with the top rail.

@3dassets516 tris
Public litter bin (Recycling Centre and Waste Transfer Yard)Animated

Public litter bin (Recycling Centre and Waste Transfer Yard)

Yard litter bin 0.6 m square and 1 m tall: a green tapered body on a charcoal base ring with a steel hoop, a blue waste notice plate and a yellow lid hinged on its back edge that lifts open.

@3dassets108 tris
Material bay divider wall, 4 m (Recycling Centre and Waste Transfer Yard)

Material bay divider wall, 4 m (Recycling Centre and Waste Transfer Yard)

Precast push wall 4 m long and 2.4 m tall for dividing a transfer yard into material bays: a tapered concrete panel on a wide foot with a charcoal impact kerb, a yellow high visibility top band and end ports so bays repeat.

@3dassets96 tris
Open top skip loaded with household waste (Recycling Centre and Waste Transfer Yard)

Open top skip loaded with household waste (Recycling Centre and Waste Transfer Yard)

The 8 yard skip filled the way a tip bay fills: tied sacks, flattened and taped cartons, a stack of timber offcuts and two lengths of scrap steel, heaped just under the top rail and modelled as clean bagged and boxed material.

@3dassets708 tris
Bulk transfer trailer (Recycling Centre and Waste Transfer Yard)

Bulk transfer trailer (Recycling Centre and Waste Transfer Yard)

Tri axle bulk transfer trailer 9.4 m long: a steel walking floor body with a green side band and charcoal top rails, an orange rear door on its hinges, landing legs, a kingpin plate and six road wheels, parked ready to be loaded.

@3dassets788 tris
Site mesh fence panel, 4 m (Recycling Centre and Waste Transfer Yard)

Site mesh fence panel, 4 m (Recycling Centre and Waste Transfer Yard)

Welded mesh boundary fence module 4 m wide and 2.1 m tall: galvanised mesh in a charcoal frame between two posts on precast concrete feet, with a green site notice plate bolted to one post and side ports on the centre line.

@3dassets312 tris
Open top skip, 4 yard (Recycling Centre and Waste Transfer Yard)

Open top skip, 4 yard (Recycling Centre and Waste Transfer Yard)

The same open top skip at 2.6 m long and 0.9 m deep, the size a tip uses for the heavy materials it fills fast: identical body, rubbing rails, lifting lugs, top rail and hook bar.

@3dassets252 tris