Free models · Game-ready GLB
Assets
Every model here is a game-ready GLB that drops into three.js, Blender, Godot, Unity and Unreal, free to use in personal and commercial work without crediting anyone.
Files are binary glTF with embedded WebP textures and quantized geometry, which three.js reads natively and Blender, Godot and Unity import as they are, so nothing needs a Draco or KTX2 decoder. Each asset page carries a permanent CDN URL you can load straight from your code.
22,099 free GLB models
Hide box (Boarding Kennels and Cattery)
Timber hide box 480 mm wide with a round entrance, an overhanging lid and a green cushion inside, the quiet corner a nervous cat is given in a pen or an isolation unit.
Heat pad with lead (Boarding Kennels and Cattery)
Blue covered heat pad 440 mm by 340 mm with a cream fleece top, a charcoal lead running off one corner and a plug on the end, the pad a cattery puts under an older cat's bedding.
Cat carrier, large (Boarding Kennels and Cattery)
The same carrier at 600 mm, the size a cattery keeps for a big cat or a pair of kittens travelling together, with the same lid, handle, vents and opening barred door.
Cat carrier (Boarding Kennels and Cattery)
Moulded cat carrier 460 mm long: a cream shell with a blue lid, an arch handle, moulded side vents and a barred charcoal door on the front with a blue catch, the carrier an owner hands over at reception.
Litter tray with scoop (Boarding Kennels and Cattery)
Cream moulded litter tray 500 mm by 380 mm with a green clip on rim, a bed of litter and a blue scoop resting across one corner, the tray a cattery pen and an isolation pen both carry.
Scratching post with platform (Boarding Kennels and Cattery)
Sisal scratching post 800 mm tall on a timber base: a bound column in four wound bands, a carpeted platform on top in green and a blue ball on a cord hanging off the edge, the one piece of furniture every cattery pen gets.
Cat walkway shelf set (Boarding Kennels and Cattery)
Four timber walkway shelves with green carpet pads on folded steel brackets, stepped 1.4 m across a pen wall and 1 m up it, the climbing route a cattery gives a cat instead of floor space.
Cattery pen door with viewing panel (Boarding Kennels and Cattery)
Cattery pen door 1.32 m wide and 1.9 m tall: a steel frame with mesh over the top, a glazed viewing panel at eye level, a green lower panel, a stainless handle and a safety catch, hung on a stile post and swinging out into the corridor.
Cat flap panel between pen and run, 1.5 m (Boarding Kennels and Cattery)
Painted block panel 1.5 m wide and 2.1 m tall with a framed cat flap through the bottom: a stainless surround, a cream flap on a head hinge with a green kick bar, a green band at hand height and run ports on both edges.
Cattery pen module with shelf ladder, 1.5 m (Boarding Kennels and Cattery)
Cattery pen 1.5 m wide, 2 m deep and 2.1 m to the roof: a painted block dividing wall on its left carrying a three step shelf ladder with green pads and a ramp, a timber sleeping box on the top shelf, a green threshold under the door head and an open back onto the run.
Toy basket (Boarding Kennels and Cattery)
Orange moulded basket 500 mm across holding the day's toys: two rubber balls, a knotted rope, a ring and a soft cube, the basket that lives by the kennel corridor door.
Raised feeding stand with two bowls (Boarding Kennels and Cattery)
Timber feeding stand 560 mm wide on four steel legs, holding a stainless bowl and a blue bowl at 350 mm, with a blue front rail and rubber feet, the height a large dog is fed at.
Folded blanket stack (Boarding Kennels and Cattery)
Three laundered blankets folded into a 400 mm stack in green, blue and cream with the fold lines modelled, for a bed shelf, a cattery pen or the top of the laundry stack.
Pile of vet bedding (Boarding Kennels and Cattery)
Four fleece vet beds folded and stacked 380 mm high in blue, cream and green, the pile that sits in a kennel laundry or on a bedding trolley waiting to go out to the bays.
Stainless feed bowl on a mat (Boarding Kennels and Cattery)
Stainless steel feed bowl 290 mm across on a black rubber anti slip mat, with a blue rim band and a cream fill, the bowl a kennel puts down twice a day.
Water bowl bracket for a kennel gate (Boarding Kennels and Cattery)
Galvanised bracket that hooks over kennel mesh and holds a blue water bowl in a ring 300 mm off the ground, with two hooks, a folded backplate and a stainless bowl clip, so the bowl cannot be tipped over.
Kennel gate name card holder (Boarding Kennels and Cattery)
Stainless card holder 200 mm wide that hooks over a gate rail: a folded backplate, a clear retainer and a blank card with a blue header and two ruled lines, so a developer can letter it or leave it as it is.
Outdoor run gate panel, 1.5 m (Boarding Kennels and Cattery)
The same 1.5 m run panel built as a gate: a mesh leaf on two hinges with an orange kick panel, a mid rail and a charcoal drop latch, hung in the posted frame and ported the same way so it laces into a run of panels.
Outdoor run roof section, 1.5 m (Boarding Kennels and Cattery)
Clear roof module 1.5 m square: a galvanised frame with two purlins, a translucent sheet over it and a blue fascia along the front edge, ported on both sides so sections lay end to end over a row of runs.
Kennel gate with latch (Boarding Kennels and Cattery)
Galvanised mesh kennel gate 1.32 m wide and 1.75 m tall: a welded frame with a mid rail and mesh infill, a blue kick panel across the bottom, two hinges on a steel stile post and a charcoal drop latch with a thumb lever, swinging out into the corridor.
Outdoor run mesh panel, 1.5 m (Boarding Kennels and Cattery)
Galvanised run panel 1.5 m wide and 1.85 m tall: two square posts on bolted feet with charcoal caps, a top and bottom rail, welded mesh infill on a 150 mm pitch and an orange kick strip along the bottom, with edge ports for laying a run of them.
Kennel dividing wall panel, 2 m (Boarding Kennels and Cattery)
Standalone painted block wall 2 m deep, 2.1 m tall and 120 mm thick with a charcoal capping rail, a stainless kick sheet on both faces and a blue band at hand height, for capping the end of a run of bays or pens.
Kennel bay module, made up for a stay (Boarding Kennels and Cattery)
The same 1.5 m kennel bay made up for a boarder: a folded blanket and a vet bed on the sleeping platform, a stainless feed bowl and a water bowl on a mat, a rope toy on the floor and a towel over the bed shelf, for the open bay a scene shows the inside of.
Kennel bay module, wide, 2.25 m (Boarding Kennels and Cattery)
The same boarding kennel bay at 2.25 m wide, the size a pair of dogs from one household shares. Identical depth, roof height, dividing wall, pop hatch, platform and bed shelf, ported on its own half width so it laces into the same run of bays.