Free models · Game-ready GLB
Exterior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
8,322 free GLB models
Hurdle (Racecourse and Parade Ring)
A 4 m hurdle panel 1.1 m high: birch flights packed into a green padded frame with a white top bar and a timber stile at each end, set in the ground on its own sills.
Dolled Rail Section (Racecourse and Parade Ring)
An 8 m dolled rail section: the same posts with the running line carried 0.9 m out on angled brackets, which is how ground staff move the racing line off worn turf.
Running Rail Run (Racecourse and Parade Ring)
An 8 m run of white plastic running rail: a top rail at 1.12 m, a mid rail and posts on 4 m centres, ported at both ends so runs couple into a continuous rail of any length.
Turf Track Straight (Racecourse and Parade Ring)
A 12 m length of 12 m wide turf racing surface with the mowing bands running down it, ported at both ends and both sides so any number of them tile into a straight.
Turf Track Bend (Racecourse and Parade Ring)
A 22 degree turn of 12 m wide turf on a 26 m centreline radius, banded like the straight and ported at both ends, so a straight runs into a home turn without a seam.
Running Rail Post (Racecourse and Parade Ring)
One white plastic running rail post, 1.12 m to the cap on a square foot plate, for closing a rail run against a gate, a wing or a building corner.
Stone flag path module, 3 m (Botanical Glasshouse and Palm House)
Three metre length of flagged path 1.5 m wide, six worn limestone flags with open joints on a bedding course, ported both ends so a path runs the length of a glasshouse.
Rainwater downpipe with hopper head, 4.2 m (Botanical Glasshouse and Palm House)
Cast iron rainwater downpipe 4.2 m tall with a moulded hopper head, two wall brackets and a shoe at the foot, for taking an eaves gutter down the face of a glasshouse or a boiler house wall.
AnimatedCoal chute with iron lid (Botanical Glasshouse and Palm House)
Stone kerbed coal chute into a boiler house cellar, 1.4 m by 1 m, with a sloping delivery throat and a ribbed cast iron lid that lifts open on its back hinge.
Brick boiler flue chimney, 5.6 m (Botanical Glasshouse and Palm House)
Square brick flue chimney 5.6 m tall on a splayed base, tapering to an oversailing brick cap with a cast iron cowl, for the boiler house that heats a Victorian glasshouse.
Brick boiler house wall, 3 m (Botanical Glasshouse and Palm House)
Three metre red brick wall 2.84 m tall with a plinth course, a stone band and a weathered coping, ported both ends so the boiler house and the yard walls run off one module.
AnimatedBoiler house door module, 3 m (Botanical Glasshouse and Palm House)
Three metre brick module with a segmental arched opening and a boarded iron strapped door 2.1 m tall that swings open, ported both ends to sit in a brick wall run.
Pitched roof glazing panel, 3 m (Botanical Glasshouse and Palm House)
Three metre lean to roof panel already laid at its 20 degree pitch: a glazing bar frame with six panes, a ridge bar at the top edge and a drip bar at the foot, ported both ends so panels repeat along an eaves.
AnimatedGlazed entrance door pair, 3 m bay (Botanical Glasshouse and Palm House)
Full height entrance bay: stone piers, a cast iron frame, a glazed overlight and a pair of white glazed doors 2.35 m tall that swing open on their hinges. Ports at plinth and frame height on both sides.
Curved eaves and gutter run, 3 m (Botanical Glasshouse and Palm House)
Three metre eaves run for the top of a bay: a coved cast iron cornice on scroll brackets with a half round gutter under it, ported both ends so the eaves follows the wall round the house.
AnimatedLantern ridge with opening vents, 3 m (Botanical Glasshouse and Palm House)
Three metre glazed lantern for the crown of the vault: a curb, upstand glazing, cast iron cresting and a pair of side hung ridge ventilators that swing open on their arms.
Barrel vault roof section, 3 m span (Botanical Glasshouse and Palm House)
Half round glazed barrel vault section, 3 m span and 3 m long, seven glazed facets between eight glazing bars with a moulded arch rib at each end. Ports on both ends so the vault repeats down a run.
Glasshouse apse end, 3 m chord (Botanical Glasshouse and Palm House)
Semicircular apse closing the end of a glasshouse run: five faceted glazed bays on a stepped stone plinth of the same curve, 1.5 m deep on a 3 m chord, ported at plinth and frame height on both sides.
Glasshouse corner bay, 3 m arms (Botanical Glasshouse and Palm House)
Right angle corner for the glasshouse shell: an L of stepped plinth, a heavy corner column and two 3 m glazed arms, ported at plinth and frame height on both arm ends so the runs land straight on it.
Glasshouse bay module, 3 m (Botanical Glasshouse and Palm House)
Three metre cast iron glasshouse bay 3.3 m tall: stiles, sill, wall plate, a transom and three glazing bars carrying eight panes, ported both ends. Stands on the stepped plinth wall at y=0.9.
Stepped stone plinth wall, 3 m (Botanical Glasshouse and Palm House)
Three metre stepped limestone plinth 0.9 m high, an oversailing base course, a set back die and a weathered cap, ported on both ends so a run of any length carries the glasshouse bay frames.
PA Speaker on a Stand (Hot Air Balloon Festival)
A public address speaker on a tripod stand, 2 m tall, with a plain grille, a horn and a cable, for launch announcements across a field.
Blank Finger Post (Hot Air Balloon Festival)
A 2.3 m direction finger post with three blank arms in three colours, for signing the way to a launch field, a car park or a catering line.
Bunded Fuel Bay (Hot Air Balloon Festival)
A 3 m bunded fuelling bay: a kerbed steel spill tray with four propane cylinders standing in it, two blank warning boards on posts and a chain across the front.